Question about 1999 Chevrolet Malibu

1 Answer

My headlights don't work they only work on high beams an when the truck is running an my lights are turned off not sure if it might be a fuse or do i need to replace my headlights because they work just not when my lights are on unless i turn on the high beams

Posted by on

  • Anonymous Aug 22, 2008

    low beams dont work only hi beams

  • xlapdog Apr 14, 2009

    I have the same problem. My Driver's side headlight is out. I replaced the bulb but to no avail. I have passenger side low beam and both side high beam but no driver's side low beam. Is there a seperate fuse or breaker for t he driver's headlight?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I got news lightbulbs for my driver side headlight and it only works when it is on high beams, passenger side works on both low beam and high beam. What could it be? Would it cost a lot to get fixed?

Posted on Aug 25, 2008

4 Suggested Answers

  • 202 Answers

SOURCE: the low-beam headlights don't work.

Possibly the bulbs. Take a look at them; they have 2 coils per bulb, one for the low beam and one for the high beam. So it is possible that the more used low beam burns out before the lesser used high beam.

Posted on Aug 19, 2011

ourhowse
  • 2007 Answers

SOURCE: which fuse controls the low beam headlights?

Does the high/low indicator on your dash go on and off?

Posted on Jun 04, 2009

alicantecoli
  • 21949 Answers

SOURCE: I have a 1997 Camry.

sounds like it to me,new switch unit not evan i can bodge them very often ,cant get them apart to clean contacts

Posted on Feb 19, 2009

  • 180 Answers

SOURCE: My headlight low-beams don't work, yet the

I had a similar issue with a 92 Saturn SL1, were the problem wasn't anything easy. It ended up being that the wiring was so old and worn out (Somehow) that I ended up just buying the replacement light sockets with the wire leads and rebuilt the headlights to run off from toggle switches mounted on the dashboard.

Posted on Oct 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

2 Answers

Replaced battery in crv and now headlights don't work


Check the low beam fuse in the fuse box, usually a 20A. If the fuse is blown/shorted during the replacement of the battery, your lights won't work. Replace the fuse if that's your case. Hope this helps.

More help: Moonlight Driving
replaced-battery-in-crv-now-headlights-zp00lepaloflvda1hbduq5xd-4-9.jpg

Dec 29, 2012 | 2006 Honda CR-V

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

Click headlights to low beam and no lights work on high beam


I'm not sure exactly what your problem is. When you "click" your lights to low beam, your high beams should not work. But if your low beams work when you "click" them on, but your high beams don't work when you "click" them on, you either have a blown fuse, bad relay or high beam elements burned out on both lamps. (Not so unusual) Possibly a bad "dimmer" stalk switch or bad wiring, too, but a little less likely.

Sep 05, 2011 | GMC K1500 Cars & Trucks

1 Answer

High beams work low beams do not


you don`t say if you have checked the fuses for the headlights.if the fuses are okay and you know that the low beam filaments are working.you may have to feed power and ground directly to the proper headlight prongs from the battery to make sure the bulbs are good.then it could be a relay for the low beams or a switch for the headlights.you don`t say if you have daytime running lights on this car as there is a module for this system that may be the problem for the now low beams.

Mar 28, 2011 | 2006 Chrysler PT Cruiser

1 Answer

I have a 2005 dodge caravan. the headlights have


On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

May 28, 2010 | 2005 Dodge Caravan

Not finding what you are looking for?
1999 Chevrolet Malibu Logo

Related Topics:

704 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...