Question about Chevrolet Blazer

1 Answer

How to rplace front shocks on a 2004 chevy blazer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 119 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need New Shocks


I would suggest that you put Monroe sense a track shocks on this truck. There is also an option for a spring assist load leveler shock for the rear that would give you a little firmer ride and help a lot when towing or loads. hope this helps...Chris

Mar 20, 2014 | 1997 Chevrolet Blazer

1 Answer

My 2004 chevy blazer clunks only in 4whl drive, right front. Anyone know what it might be?


There is so much turning up there that it can be several things. The normal Balljoint problem can have the part slip in and out of its socket if it gets loose. Check your tierod ends for slack.
Sometimes Calipers can rock if they are failing to float properly with loose hardware. The front torque is changing from being pushed by the rear wheels to pulling with the front wheels.
This can affect how the Balljoints react as the sockets are getting torque differently than in 2WD. You are also using the CV joints to pull rather than coasting in 2WD. Check your end play for the front hubs; they used to be about .005 and you need Year model specific Specs to be sure.

Check out some 4-Wheeling Blog sites as they may know more about the common problems. There are so many things to check that a Blog may be your best source.

Dec 08, 2011 | 2004 Chevrolet Blazer

2 Answers

Blower not working on 1997 chevy blazer


Check the blower motor relay, usually located under the hood in a box, also check the fuse in the fuse panel for the blower motor. If both of those are good then you have a bad blower motor.

Mar 17, 2011 | 1997 Chevrolet Blazer

1 Answer

What do shops charge to change two front shocks on a 2004 chevy blazer?


Msot shop will charge you close to $100. This is an easy job and yo may be able to tackle it yourself with at few tools. Trace the shock to see if it is easy to access both ends (turn the wheel to one side to gain access). Make an assessment if this is a job you can tackle or ask a friend to assist...you may get the job done for a lot less. Shocks are pretty simple. Good luck

Feb 11, 2011 | 1998 Chevrolet Blazer

1 Answer

I need to change my front and back shocks on my 1999 chevy blazer 4.3 4x4 and the bolts are pretty rusted so I want to go out and buy some new one's before I replace the old shocks in case I bust one, and...


If you call the dealer they may tell you the bolt size or they would get them for you. Probably wouldn't be too expensive and you would have the right size and grade.

Sep 17, 2009 | 1999 Chevrolet Blazer

2 Answers

Front driver side strut needs changed.how hard is this to do by yourself? 2005


If you have the correct tools not too hard..you can borrow tools from advance auto parts with a deposit.You need to replace both front sides at the same time struts and shocks should ALWAYS be replaced in pairs.Having an extra set of hands does come in handy as well have a friend help you and when done throw some burgers on the grill.

Jul 29, 2009 | Chevrolet Equinox Cars & Trucks

1 Answer

1991 S10 blazer 4x4 4.3 popping coming from the front


the popping sound is the stabilizer links or the lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with dawn dishwashing liquid and put them back.

Jun 23, 2009 | 1991 Chevrolet S-10 Blazer

4 Answers

Shaking in my 86 chevy s10 blazer 4x4 2.8


U-joints.....seems like your vehicle wants to launch off the road?

Mar 22, 2009 | 1986 Chevrolet S-10 Blazer

1 Answer

Drone type noise in 2004 4 door chevy blazer


Check your tire balance and right front wheel bearing

Mar 17, 2009 | 2004 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...