Question about 2003 Mazda MPV

1 Answer

Car is missing on idle and going need to change the coils need to locate the coils

Please help me locate the coils

Posted by on

1 Answer

They are mounted to the top of the plugs, 6 cyclinders, six individual coils

Posted on Aug 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 Ford Windstar 3.8l miss fire on cylinder #2 and lean on bank #1. I changed plugs,wires,and coil. Still miss firing and chugging! Someone help me please.


Have you checked your fuel pressure ,Changed your fuel filter, and last of all , Ignition module... free check at Autozone, Advance, Napa,
The chugging- clean out or replace your IAC valve, Idle Air control valve...

Aug 08, 2014 | Cars & Trucks

1 Answer

Missing fire


a bad injector can cause a miss, you can listen to each injector with a stethoscope. It should make a rapid clicking sound. If it makes a deep thumping sound it is likely bad. also an intake leak can cause a miss at idle. also an EGR valve partially open can cause miss at idle. I always check cylinder compression when replacing plugs or coils for a miss. You need quality tech to check for above items.

Mar 02, 2014 | Toyota Avalon Cars & Trucks

2 Answers

My 93 olds cutlass ciera keeps misfiring and stalling, i have change the spark plugs, fuel filter, o2 sensor, maf sensor, and still stalls and misfires any ideas?


For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Feb 14, 2012 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Missfiring detected in OLDSMOBILE intrigue 2002 3.5L


For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Jan 30, 2012 | 2002 Oldsmobile Intrigue

1 Answer

I have a 1991 geo storm, that was working fine until one day that start missing at idle speed badly, i did a spark plug change, oil-oil filter, rotor, cables rotor cup and still missing can you guys ...


Hello and welcome to FixYa!
The problem can be coming from the coil pack located inside the engine just where the distributor sits. If the coil pack is faulty it tends to give inaccurate current supply that can cause the engine to misfire. I strongly suggest that you have it replaced to resolve the issue.
Hope this helps and thank you for using FixYa! Have a good one!

May 03, 2011 | 1991 Geo Storm

1 Answer

Engine miss at idle. cylinder 1 and 3 has no fire


Try the ignition module.This is more than likely your problem.It is on the coil pack where the wires connect to.I have had a few of these go on me.This should take care of your problem.Hope this helps.Good luck.

Mar 24, 2010 | 2004 Chevrolet Cavalier

2 Answers

2003 ford f150 misses at idle starts fine runs fine new fuel filter new o2sensor


One thing to take a look at is the vacuum elbow on the back of the throttle body.

Remove the plastic throttle body cover, and check the vacuum line.

Ignore the IAC notation, this is the only picture I have handy, showing the vac line just above the IAC.

1a489d1.jpg

Dec 19, 2009 | 2004 Ford F150

2 Answers

Rough idle and missing during acceleration


you could have clogged fuel injectors or fuel filter.

Apr 27, 2009 | 2001 Mazda Tribute

1 Answer

1994 mercury grand marquis v8-281--4.6l


Ok odds are you just need a routine tune up. Plugs, fuel filter, air filter. Now this engine uses coil packs i think, so you wont have normal plug wires. The coil packs are individual and sit directly on the plugs. So it is possible you have a bad coil pack. These engines were known to have this problem in excess. So try the cheap fixes first. plugs, fuel filter...these two is the best two to try first.. The air filter wont cause a bad miss unless it is completely dobbed up. so just for your own good to change the air filter.Now if neither the plugs or fuel filter fixes this car try this. Each coil pack will have an individual plug on top of them. So listen closely to your engine. Unplug each coil pack one at a time, Now evry time you unhook a plug the engine should miss, so unplug one at a time, and if the engine does miss they are working properly. Now if you unhook one of these and there is no change in the idle of your engine, my friend you have found the problem. All you have to do if you find one that does not change the engine idle, you just go buy a coil pack and replace it. This should fix you right up

Sep 04, 2008 | Mercury Marquis Cars & Trucks

Not finding what you are looking for?
2003 Mazda MPV Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...