Question about 1999 Daewoo Nubira

1 Answer

Tracking keeps going out of lime every time you move the dteering wheel

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

This could be as simple as worn track rod ends, get a reputable garage to check them, some tyre fitters may also be able to check.

Posted on Jul 27, 2008

  • Steve Field Jul 27, 2008

    This could be as simple as worn track rod ends, get a reputable garage or tyre bay to check them.....

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Takeuchi mini digger tracking problem


Pressure valve? does it only do it to only one side? Left or right. The reason you move both tracks with the bucket running is because you relieve pressure. One side is free wheeling, As they call it. I work on cars, But also have done to many hydraulic components. You have a pressure control valve that is bad.

Jul 10, 2016 | Mini Cars & Trucks

1 Answer

1999 toyota 4 runner vibration and or above 60 any ideas


The first thing that would come to mind is tire balance, have the tires been balanced? If not then do that first, if yes and the vibration can be felt in the seat of the truck and not much in the dteering wheel then I would have the driveshaft closely inspected, a worn u-joint may not be evident by just trying to move it around by hand, the driveshaft should be removed to check them. Obviously if the vibration is only when applying the brakes then it's neither of those and the brakes need attantion.

Mar 23, 2012 | 1999 Toyota 4Runner

1 Answer

What does low track mean when it keeps poping up.


It means you have traction control. When it comes on, you are losing traction to one of your drive wheels and the traction control is activated to keep you moving. In other words, it's doing its job. Sounds like its working well too.

Feb 29, 2012 | 2000 Pontiac Grand Am GT

1 Answer

Why do my antiloks engage when the wheels spin in awd?


The vehicle computer's Traction Control System (TCS) has detected wheelspin on one or more wheels that's greater than the detected speed of the vehicle. That is, it knows you're spinning the tires and not going anywhere (or not really going that fast). It compares the rotation of all wheels to that of the slowest moving wheel (or slowest wheel that has a sensor), and slows down the faster of the bunch. Since it's not a full-time 4-wheel drive (where all wheels move the same speed all the time), it allows some wheelspin for outside wheels around corners, but keeps the wheels in check with the brakes. Some Traction Control Systems rely on cutting engine power to stop wheelspin, while others activate the brakes on the faster-moving wheels.

Mar 09, 2011 | 2003 Chevrolet Astro

1 Answer

Sunroof will not close


It could be the motor, get someone to keep the activator pushed down and try pulling the sunroof into position. Some times they can be missing the runners and just need a little pull, the sunroof runs on a grooved track and a grooved wheel marries to the track, if this doesn"t work see if you can gain access to the wheel, that may be worn but can be replaced.

Feb 27, 2011 | Toyota 4Runner Cars & Trucks

3 Answers

03 Ford up and down in power seat


Had this same issue with my 2004 Expedition. I removed the seat, seat motor and seat track. I tested the motor by plugging back in but without the track and was spinning freely. Took the track to the Ford Dealer. Was able to speak to a service tech. Said it is not the motor it’s the track, it gets stuck if you move to the extremes of the up or down. It’s like over tightening a jar stuck and unable to open again. WHAT TO DO: there are to impellor rods the spin on both sides of the motor. The rods look like wound up springs. Reconnect the rods back in the track. Use your Electric drill to hold the other end of the to break free the stuck track by spinning the impellor rod. Do this for both side. make sure to align the rods properly before return the motor. Also, try not to fully extend the power seat to the very up or down of the track. This will keep from causing the stuck jar effect. ONE and DONE.. Hope this helps.

Feb 07, 2010 | 2003 Ford Expedition

1 Answer

Electric Window move slowly


Your window clips that hold the window in have broken.  You will need to replace these clips in order to fix it right.  The clips you can buy at any audi dealer.  Ask for the most updated ones.  There have been many updated clips.  Audi has been trying to develop better ones for years but they still keep breaking.  Its a very common issue.  Your window will still go up and down but since the clips broke you will have it bind in the track. To get you by for the time been.  Lubricate the window track with some silicon spray.  This will help keep it from binding up until you can do the repair.  

May 29, 2009 | 2001 Audi A6

1 Answer

Steering wheel alignment


Hi

Expect Kwik Fit have adjusted the tracking / wheel alignment at some time, and adjusted one track rod more than the other. ?

Count the threads showing ! ...I expect this will become apparent.

You need to have the tracking / alignment rechecked with track rods even lengths both sides.

Then if you road test and find the steering wheel out of alignment, remove steering wheel, and move round the correct position on the steering column splines.

Hope this is of help.

Good Luck !

John.

Jan 20, 2009 | 1999 BMW 318 ti

Not finding what you are looking for?
1999 Daewoo Nubira Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...