Question about 2004 Dodge Neon
Look everyone !!! i am not the only one who has this problem , but I
found the answer on my own.... iI hope this can help others . If you
have to replace a neon engine you must do these thing if you want it to
Lower vehicle and perform camshaft and
crankshaft timing relearn procedure as follows:
² Connect the DRB scan tool to the data link
(diagnostic) connector. This connector is located in
the passenger compartment; at the lower edge of
instrument panel; near the steering column.
² Turn the ignition switch on and access the “miscellaneous”
² Select “re-learn cam/crank” option and follow
directions on DRB screen
Most people don't have access to this scanner <but it must be done> I used a snap-on cost 3000 but have the reset feature
Thanks you all for your help.
Posted on Mar 01, 2009
Have a 2000 ply neon. took all the electrical and engine and transmissin out and replaced it with a 2003 electrical, engine, and transmission. But we put the 2000 stuff back into the vehicale. and now the vehicale won;t start. it back fires but it will not start. we bought new sensors, replace the pcm from the salvage yard. but bought new crank sensor, crankshaft sensor. please help me..
Posted on Sep 04, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 10, 2016 | 2005 Dodge Neon
May 21, 2011 | 2000 Dodge Caravan
Apr 08, 2011 | 2000 Dodge Neon
Apr 02, 2010 | 2000 Dodge Neon
Mar 15, 2010 | 2001 Dodge Neon
Aug 25, 2009 | 2000 Dodge Neon
Feb 03, 2009 | 2005 Dodge Neon
2,455 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: