Question about Chevrolet Silverado 1500

1 Answer

Leaking left rear wheel seal. - Silverado 1500 Chevrolet Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

Loosen differential cover and let oil drain. Remove cover, remove E clip lock from axel. Pull axel out. Remove bearing seal. Install new seal and reinstall axel. Reinstall E clip lock and new cover gasket. Fill with 75-90wt gear oil. Now I know that sound pretty straight forward. But there are some things to remember. The E clip lock can be difficult to remove sometimes. The most important thing is the seal, you will need to make sure it gets seated correctly and not torn when installing axel

Posted on Jul 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My break pedal goes to the floor


There are several causes for the brake pedal going to the floor:
- Broken seals in brake`s principal pump.
- Broken seals on rear brake's cylinder. (big lieak on wheel)
- Worn rear brake shoes, making seal travel out of cylinder. (big leak on wheel)
- Leak on tubings.
- Empty brake fluid deposit.

Nov 10, 2013 | 2001 Hyundai Accent

1 Answer

Rear seal leaking on 2007 ford escape


In order to replace the rear main seal you will need some auto repair tools and experience . this is a big job , the transmission must be removed to replace this seal, also make sure that the seal is the leak,

oil always flows down, a leak on the top of the engine will flow down and drip at the center rear and look like a rear main seal , make sure that is the leak!!.

Depending on what engine you have and if it has 4 wheel drive the time for a shop to do is from 7 to 10 hours depending on engine size and 4wd,

Oct 21, 2012 | 2007 Ford Escape

1 Answer

Rear axle leaking at right rear wheel


DO NOT WAIT- MY DEALER SAID I HAD A SMALL LEAK IN SAME PLACE, BUT DIDN'T SAY IT WAS URGENT. SEAL BLEW OUT DRIVING ON FREEWAY, DAMAGED ONE AXLE BEFORE I COULD EXIT. $1200 REPAIR. IT WAS NOT MAKING ANY NOISE TILL IT FAILED. SOUNDED LIKE TIRE THUMPING TO ME. DEALER REPLACED BOTH LEFT AND RIGHT SIDE SEALS, RIGHT SIDE BEARING AND RIGHT SIDE AXLE.

May 23, 2012 | 2003 Mercury Grand Marquis

2 Answers

Right rear wheel is leaking oil. the inside of the tire and wheel and wheel wall show oil.


Jack the vehicle up and check the brake caliper. If it isn't a seal on the caliper make sure you check the shock absorber to make sure that isn't leaking. If that is not leaking it is most likely the axle seal. Unless Ford has changed the design of that your going to have to open the rear differential, remove the retaining clip for that axle and extract it from the Axle housing. The seal is typically pressed on so it is going to be a pain to remove the old seal then press the new seal in place and re-assemble the rear end. Make sure you fill the differential with the proper fluid or you'll burn the rear end out. When your checking the caliper make sure you check the brake line for breaks and the bleed valve to make sure that is in place and not leaking.

Jun 08, 2011 | 2006 Ford Mustang

1 Answer

Rear end makes rowing sound above 30 miles per hour also tjere is a leak of rear end grease on the left rear wheel.


THE LEAK is an axle seal leaking the noise is bearings in rear end could be axle bearing of carrier/pinion bearings while driving shift weight of truck side to side see if noise changes if so it is axle bearing if not then most likely differential bearings

May 11, 2011 | 1995 Chevrolet Blazer

2 Answers

I have a ford f150 that i have redone the brakes but all i getting is a brake pedal and then goes to floor


Bleed your brakes, starting with Right rear, left rear, right front and ending with left front. You have air in the lines or a bad master cylinder. Bleeding is the cheaper of two options.

Mar 10, 2011 | Ford F-150 Cars & Trucks

1 Answer

I see some Oil leak near left side rear wheel when the vehicle(Hyundai Accent ) is PArked What could be the Issue?


If the source of the leak is betwen engine and trasmission housing then it will be rear main seal.

Most engine seals will leak if it is over 120,000 miles.

Feb 02, 2010 | 2002 Hyundai Accent

2 Answers

Leak rear ruim around tire oily


This is most likely an axle seal leaking.

Nov 25, 2009 | 2005 Mercury Grand Marquis

1 Answer

Replace left rear axle seal 1999 ford explorer


Axle Shaft Removal
  1. Raise and support the vehicle. For additional information, refer to Section 100-02 .
  1. Remove the wheel and tire assembly. For additional information, refer to Section 204-04 .
  1. Remove the differential housing cover (4033).
    1. Loosen the bolts and drain the lubricant from the rear axle housing (4010).
    1. Remove the bolts.
    1. Remove the differential housing cover.
Remove the rear brake disc (2C026). For additional information, refer to Section 206-04 .
  1. sxn~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Turning the differential case (4204) or an axle shaft (4234) with the differential pinion shaft (4211) removed will cause the differential pinion gears (4215) to fall out of the assembly and damage the components.
    Remove the differential pinion shaft.
    1. Remove the differential pinion shaft lock bolt.
    1. Remove the differential pinion shaft.
  2. sxn~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not damage the rubber O-ring in the U-washer groove.
  3. Remove the U-washer (4N237).
  4. Push the axle shaft inboard.
  5. Remove the U-washer.
Reinstall the differential pinion shaft.
  1. Install the differential pinion shaft.
  2. Install the differential pinion shaft lock bolt finger-tight.
  3. sxn~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not damage the wheel bearing oil seal (1177).
    Remove the axle shaft.
-----------------------------------------------------------------------------------------------------------------
Seal Removal
  1. Remove the axle shaft (4334). For additional information, refer to Axle Shaft in this section.
  1. sxn~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Never remove the wheel bearing oil seal (1177) by itself. Always remove the rear wheel bearing (1225) and the inner wheel bearing oil seal at the same time.
    NOTE: If the wheel bearing oil seal is leaking, the axle housing vent may be plugged with foreign material.
    Using the special tools, remove the rear wheel bearing and wheel bearing oil seal together.
6c7eb46.gif Installation
  1. Lubricate the new rear wheel bearing.
    • For 4.0L SOHC and 4.0L EI with limited slip rear axles and 5.0L vehicles, use SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSL-M2C192-A.
    • For 4.0L SOHC and 4.0L EI with conventional rear axles, use SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification WSP-M2C197-A.
  1. Using the special tools, install the rear wheel bearing.

ece7d89.gif
  1. Lubricate the lip of the new wheel bearing oil seal.
    • Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
  1. Using the special tools, install the wheel bearing oil seal.
c21e27d.gif
  1. Install the axle shaft. For additional information, refer to Axle Shaft in this section.

Feb 22, 2009 | 1999 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

558 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...