Clicking noise when starting 99 Toyota Tacoma lights work, dashboard lit Any thoughts?

There is a transponder chip inside the head of the key ,and also a transponder key amplifier coil surrounding the ignition lock cylinder . There is also a security light on the instrument cluster .Is the light lit ?

Check water pump. Check idler and tension pulleys.

You need to check the AC pump and see if it is frozen up.

Have you tried replacing fuses? i would look there first. a blown fuse is easy to see.

If there is no "clicking noises" at all first you have to bypass the Clutch Start Switch. To do so remove two wires from the Start Switch and connect them together.
If it doesn't work trouble shoot starter and solenoid. With a wire connected to (+) terminal of the battery power up the solenoid, at the thin wire contact of the starter. You need another person to help you, in the cabin turning the ignition key in ON and start position. If starter and solenoid are O.K this will start your car. If not you have to replace the starter + solenoid assembly. Good Luck.
Sam from,
American Car Co.

I have a 2002 toyota tacoma 2 wheel drive My key is stuck in the ignition and will not turn

turn your dimmer switch up it effects those lights and the dashboard

Try putting foot on brake, or is key in ignition, also over-ride button by shifter. Auto's have safety micro switches in these places so not to have car in drive and start, "extremely dangerous" Try this first easily missed. lol

try turning up the brightness of yo inst panel light should around the headlight swhitch or will be a small nob or button with a picture od a light bulb with lines around
Pls rate this solution

what engine size and transmission, automatic or stick shift do you have in this truck?