Question about 1994 Jeep Grand Cherokee

1 Answer

Cruise control does not work - 1994 Jeep Grand Cherokee

Posted by on

  • sdpurnell Feb 22, 2009

    When I push the button to turn the computer on, the light sometimes comes on, and sometimes it doesn't. Regardless of the status of the green indicator light, when I press the button to actually activate the cruise control, it fails to work at all. Any help will be much appreciated, as I have a really long trip in a week

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace the Brake light control switch located in front of the brake peddle under the dash this also turns the cruise off when braking. While driving put your foot behind the brake peddle and pull back toward you while doing this try your cruise if it works there are three possible causes or a combination of all three. Brake control Switch, Loose or sloppy brake pedal not activating the Brake switch properly or week brake pedal return spring. Good Luck.

Posted on Feb 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cruise control not working


cruise controls are dependent on the following sensors all working together
brake sensor
clutch sensor
auto--vehicle speed sensor
rpm's sensor
fuse for the cruise control
cruise control switch either or all not working will stop the cruise control from engaging
road speed at which you can engage the cruise control has to be above a reset speed before it will cut in and work

Sep 05, 2015 | 2009 Chevrolet Chevrolet Equinox LS

1 Answer

What causes my cruise controll to not work intermittenly


cruise control starts working above 50kmh, so if your under that it wont work. the cruise servo may be at fault, or I have seen battery acid leak down on the vacuum lines causing cruise not to work correctly. cruise control works off of a vacuum so without it, it wont work. if the cruise light doesn't turn on when pressing the set/cruise button intermitantly it may be the switch itself that is starting to fail

Apr 24, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

CRUISE CONTROL WON'T WORK ON 2005 CHEVY TRAILBLAZER


check cruise control fuse and check the brake lights see if brake light working because the brake light switch will deactivate cruise control when brakes is applied.if brake lights dont work either fuse blowed or switch bad.if all is good have vechicle code scan because cruise control control by PCM and vechicle speed sensor and thottle actuator control motor.

Apr 17, 2013 | 2004 Chevrolet TrailBlazer

3 Answers

Crusie control does not work on 2011 gmc sierra 1500 and I've already replaced the switch?


If the switch is replaced,then it can be wiring issue or faulty cruise control board.But as the switch is replaced,get the voltage at the switch tested to confirm the switch is actually receiving voltage.If no voltage received at switch power supply wire then ,apply external 12 volt power to the cruise control switch wire and then see if cruise control comes ON.If yes,then you know wiring is issue.
=============

On this case, to troubleshoot this problem, there are solved help links. Click the link directly and refer the details to solve this problem yourself, with help of diagrams: ------

Ford ranger cruise control not working? http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html

-----------

Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------

Horn and cruise control not working on Plymouth Grand Voyager?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------------

Horn and Cruise control quit working on 2003 Jaguar S-Type?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

-------------

Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500

http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------

Cruise control stop working on 1994 Ford ranger?

http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

----------

Cruise control not working?

http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

--------------

1996 Ford Explorer: Cruise Control Wiring Diagram?

http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html

----------

These will help.

Thanks.

Nov 28, 2012 | GMC Cars & Trucks

2 Answers

Cruise control not working


On these case,to troubleshoot these problem,there are solved help links.Click the link directly and refer the details to solve these problem yourself,with help of diagrams:------
Ford ranger cruise control not working?


http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html

----------- Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------

Horn and cruise control not working on Plymouth Grand Voyager?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------------
Horn and Cruise control quit working on 2003 Jaguar S-Type? http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

-------------
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
Cruise control stop working on 1994 Ford ranger? http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

----------
Cruise control not working? http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

--------------
1996 Ford Explorer: Cruise Control Wiring Diagram?


http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html
----------
These will help.
Thanks.

Nov 22, 2012 | 2003 Ford Expedition

2 Answers

How to fix cruise control


Cruise controls can cease to engage if the clutch or brake light cruise switch are out of adjustment. If this happens, try placing you foot under the clutch pedal (if equipped) and lift up on it (toward you) and hold it while engaging the cruise. If it now works, it will likely cut out when you remove your foot from under the pedal. Check the brake pedal in an identical fashion. Adjusting the switch at the pedals can often solve he problem. Some vehicles (Honda, Acura, Ford, to name a few) have a plastic insert that mounts in the pedal arm which presses against the switch. These can become brittle and fracture into pieces. My Acura has little pieces of blue plastic on the floorboard around the brake pedal one afternoon and I noticed the cruise didn't work. It was the pieces of the insert that had come to pieces preventing the cruise from coming on. I replaced the insert and no more problem with the cruise.

Mar 10, 2012 | 2003 GMC Sierra 2500HD

1 Answer

Cruise control don't work


To troubleshoot your problem,there are few help links,provided below.Click the link directly and follow the procedure to confirm the fault.So as per that you can continue further in repairing this issue of cruise control not working.
The direct help links are as follows :-----cruise control not working?


http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html
-----------Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------------
Horn and cruise control not working on car?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------
Horn and Cruise control quit working suddenly?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

----------

Cruise control stop working ? http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

---------

ford ranger cruise control not working? http://technoanswers.blogspot.in/2012/02/2005-ford-ranger-cruise-control-not.html

-------------

My Cruise control not working? http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

----------

This troubleshooting help links will help you to confirm the problem.

Thanks.

Feb 13, 2012 | Chevrolet 3500 Cars & Trucks

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

Related Topics:

489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74418 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7254 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...