Question about Lincoln Continental

1 Answer

How do I remove the power window motor from the drivers side door in a 1966 lincoln?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 154 Answers

Take off your door caseing you will have to remove things like speakers and armrest and switches if seperate from door caseing and the window motor will be bolted to a mount inside the door. You may need someone with small hands to undo the bolts, and take the wireing loom off the motor first if you can as you don't want to brake a wire to the motor. It is also a good idea that when you do get to the motor removal to prop your glass up with a small piece of timber or something else small so your glass does not drop down to far to make reinstall easier. Your motor is seperate from the toothed arm that makes the window actually go up and down so ubolt it from this inside the door if at all possible as to put this back in can be a pain. Motor mount bolts may even be under the door behind door seal depending on door style.

Posted on Jul 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

1 Answer

Driver side window wont go up?


If the other windows work, then it has to be in the driver's switch button, or the driver's window motor has given out, or a wire has come loose from the switch to the motor inside the door. Usually you have to take the door panel off to investigate. Can the switch and it's electrical connector be removed from the door panel? If you can get to that, you can use a couple of jumper wires and test the motor for operation...or noise-if it groans or buzzes or clicks a lot, you will have to remove the door panel to get to it for repair or replacement.
Has a liquid spilled on the driver's switch? That can disable the switch.
The jumper wires (2 paper clips work well) work thus: at the connector you will have a power wire (hot with key on) and a ground wire for the power windows. jumper those two to the two terminals for the driver's window motor, with key on. The window should go one way -either up or down- if you reverse the jumper wires the motor and the window should go the other way. if all works well like that, the motor, window regulator assembly, and the wiring is good, problem is in the switch.

Jun 28, 2014 | Lincoln Navigator Cars & Trucks

1 Answer

Drivers power window does not work and all,windows other works


For all types of power window problem and power windows not working,i suggest you to go through the help links given below.Click the link to go through its procedure to troubleshoot the problem :------

driver side power window problem?
http://technoanswers.blogspot.com/2011/06/driver-side-window-problem-on-mercury.html

-----------

Driver side power window wont go up?
http://howtobyme.blogspot.com/2011/10/driver-side-power-window-wont-go-up-on.html


---------

Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

rear door or window will not open ?
http://technoanswers.blogspot.com/2011/06/rear-door-or-window-will-not-open-on.html
--------------
How to remove door panel, door window motor and regulator ?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html

--------

Power windows not working after car wash?

http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html

All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Volkswagen Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html

-------------Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html

------------

How to replace power window motor in car?
http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-power-window-motor-in.html
----------
HOW TO REPLACE A POWER WINDOW SWITCH
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-power-window-switch.html
------------
How to Replace a Window Motor
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-motor.html
----------
HOW TO REPLACE A WINDOW REGULATOR WITH MOTOR
http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-window-regulator-with.html
---------
HOW TO REPLACE WINDOW RUN CHANNEL SEALS
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-run-channel-seals.html
-------
HOW TO REPLACE A WINDOW REGULATOR
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-regulator.html


-----------This will help.Thanks.

Feb 05, 2012 | 2001 Lincoln Continental

1 Answer

How to remove window moter


I had to change power window regulator for the front driver's side. If you activiate the power window button and hear a sound, the switch is working and probably the motor is working as well and all you need is the regulator which you can buy at 1AAA auto on line. You must remove the door panel to change motor and/or regulator. You must remove two screws behind the door pull strap (pry the two caps out and the screws are behind). There is one screw when you lift up the door rest compartment, two in the door where carpet is and one screw on the upper side of the door when you open it. I have photos that I got online. My e-mail is yanksali@aol.com. E-mail me and I will try to find the photos for you.

Sep 20, 2010 | 1997 Lincoln Town Car

1 Answer

2003 Lincoln Town Car - Power window switch removal/installation


SECTION 501-05: Interior Trim and Ornamentation 2003 Town Car Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 01/28/2002 Front Door Trim Panel adobe.gif Printable View (206 KB) Removal and Installation
NOTE: LH side shown, RH side similar.
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01.
  1. Remove the window switch plate.
    a0045307.gif
  1. Disconnect the electrical connectors.
    a0044981.gif
  1. ani_caut.gif CAUTION: Use care not to damage the trim panel covers.
    Open the screw covers.
    a0045817.gif
  1. Remove the screws and the assist handle.
    a0045818.gif
  1. Remove screws and the front door trim.
    a0045819.gif
  1. Disconnect the electrical connectors.
    a0045834.gif
  1. To install, reverse the removal procedure.

2010&c18=modelyear&c20=n306887&c35=wsm%2cfront%20door%20trim%20panel%2cs3g%2c501-05%2cremoval%20and%20installation&s=1600x900&c=32&j=1.3&v=y&k=y&bw=1171&bh=582&ct=modem&hp=n&[aqe]

Apr 02, 2010 | 2003 Lincoln Town Car

1 Answer

How to replace driver side power window motor and regulator


remove door handles and door panel then remove rivits that hold the track assmbly and remove glass from track take it all the way out the door and then wiggle the track and motor assmbly out

Jan 13, 2010 | 2005 Lincoln Aviator

1 Answer

How to repairdriver side window motor for a 1998


Assuming the window motor runs BUT doesn't move glass.......carefully remove the door trim. unhook electrical connectors,remove water shield plastic, access inside the door and locate motor,( pushing glass up if required)....now on the inner panel locate #3 DIMPLE marks, this is where the motor bolts are at...use a drill and drill thru slowly (drill for the size of socket you have).....CAUTION: place a block/bar/etc to keep the window from falling down and cutting your arm off when the motor is removed.... Now with the motor out, remove the cover at the gear,clean and remove the plastic gears, there are 3 round inserts (may be broken now) that needs to be replaced..purchase at your local parts store...kragen/napa/etc.... reverse steps to assemble...hope this helps you...be careful...GL

Jul 08, 2009 | 1998 Lincoln Town Car

1 Answer

How to remove inside door panal to replace window motor?


Remove the window switch bezel. It has a snap clip in the front just pry the front up with a pick or small screw driver the pull it forward and disconnect. Remove the plastic covers from the ends of the pull strap and remove the 2 screws.Then locate the 2 screws at the bottom of the door panel and remove.Then pull out on bottom of door panel and work your way up to release the plastic push pins.

Jan 27, 2009 | 2000 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...