Question about 2000 Chrysler Cirrus

4 Answers

Transmission chrysler 2000 2.4 liter

The transmission stay just in 2 .

Posted by on

  • manipaj Feb 26, 2009

    My 1995 chrysler cirrus jumps into low gear after 10 min warm up. Stay is low gear until car has cooled off.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If its staying in 1st or 2nd and your speedometer is not working it is probably your speed sensor. i just had this problem. had the speed sensor replaced problem was corrected

Posted on Jun 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had Battery keep giong down
I removed each fuse to try to find why.when I started drive it again it would not shift at all
The check engind kight is on
Transmission worked fine before

Posted on Mar 27, 2009

Transmission not shifting properly and speed odmeter not working

Posted on Aug 15, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 330 Answers

Change the trans.fluid and at the same time check the lenkage.

Posted on Jul 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3.8l awd. how much transmission fluid goes in to a completely empty system,and what type of oil for transfer case.


Reference: 3.3/3.8L Fluid Capacities & Specifications - The ...

forum.chryslerminivan.net/.../12671-Reference-3.3-3.8L-Fluid-Capacitie...

May 8, 2009 - 10 posts - ‎2 authors
FLUID CAPACITIES Fuel (Approximate) - 20 US Gallons (76 Liters) Cooling System* 3.3 and 3.8 Liter Engines - 13.23 Quarts (12.5 Liters) NOTE: - *Includes heater and ...1996 Chrysler Town & Country LX [Always and forever the favorite.] ... Does anyone know what the transmission fluid capacity is?

1998 CHRYSLER TOWN AND COUNTRY 3.3L 6-cyl Engine ...

www.amsoil.com/.../vehiclelookup.aspx?...1998+CHRYSLER+T...

Amsoil

Dec 29, 2015 | 1998 Chrysler Town & Country

1 Answer

How many quarts of transmission fluid go into a 2000 chrysler voyager


2 GALS ATF +4, 8 QTS WITH TORQUE CONVERTER. IF YOU ARE JUST CHANGING FILTER ABOUT 1 GAL/ 4 QTS. I GET 6 TO BE SAFE AND HAVE EXTRA. MEASURE WHAT COMES OUT, AND USE THAT AS A GUIDE, RUN LET WARM UP AND CHECK DIPSTICK, DON'T OVERFILL

Mar 02, 2013 | 2000 Chrysler Grand Voyager

1 Answer

I need to know: Which cylinder is the 4th cylinder on the 6 cylider Chrysler 2.7L DOHC 24 Valve engine?


Check this diagram for...
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "U"
or
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "V"
or
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "R"

zjlimited_275.gif


Good luck (remember to rate and comment this answer).

Mar 28, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

I have a 2000 Dodge Dakota 4wd 5.9 liter V/8 code is p1757 reads undefined code?


P1757 Chrysler

Governor pressure above 3 psi at 0 MPH
- ECM detected vehicle not moving yet governor pressure is above 0 psi

Probable Cause[s]

  1. Internal transmission failure-
  2. Open or shorted circuit condition

Mar 05, 2011 | Dodge Dakota Cars & Trucks

1 Answer

I have a 2004 concorde 2.7 liters , i just washed the car , suddenly check engine light appears out , the car shifts fine within the early few minutes but later it wont shift to 3rd it stay on 2nd gear,...


Could be water that touched one of your electronics that makes your transmission having problems try to dry the Transmission electronic connectors with low air pressure and see whats happens.Good luck

Dec 13, 2010 | 2004 Chrysler Concorde

2 Answers

So i got a 2000 chrysler cirrus and today the speedo stop working followed by the check engine light coming on what should i look for


Take it to parts store and get trouble code. I think a sensor went out in the transmission. Doest sound bad but should hook up to diagnostic took soon to make sure

Oct 05, 2010 | 2000 Chrysler Cirrus

1 Answer

Fluid capacities and fluid specs


2000 TOYOTA TACOMA 2.7L 4-cyl Engine Code 3RZ-FE

Engine Oil Grade 1......API* All TEMPS......5W-30 Optional ..10W-30
Engine, 2WD, with filter..........5.5 liters
Engine, 4WD, with filter..........5.4 liters

Manual Transmission,......GL-5/ GL-4 All TEMPS......75W-90
Automatic Transmission,A340E......AF3 / A43D......AF3

Differential, Front/ Rear W/ ADRD......GL-5 ALL TEMPS......75W-90
Differential, Front Less ADRD......GL-5 ALL TEMPS......80W-90

Transfer Case,......GL-4/GL-5 ALL TEMPS......75W-90 Gear oil.

Capacity:
Cooling System, Initial Fill..........8.5 liters
Automatic Transmission, A340E Initial Fill..........1.6 liters
Automatic Transmission, A340F Initial Fill..........2 liters
Automatic Transmission, A43D Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A340E..........7.2 liters
4 speed A340F..........10.1 liters
4 speed A43D..........6.5 liters
Manual Transmission, ..........2.5 liters
Differential, With ADRD Front..........1.2 liters
Differential, Without ADRD Front..........1.1 liters
Differential, 2WD V6 Rear..........2.6 liters
Differential, 4WD Extra Long Rear..........2.5 liters
Differential, Short WB With LSD Rear..........2.7 liters
Differential, Short WB Without LS Rear..........2.6 liters
Transfer Case, Electronic..........1.2 liters
Transfer Case, STD..........1 liters


Feb 09, 2010 | 2000 Toyota Tacoma PreRunner

2 Answers

DODGE INTREPID


They are pretty reliable. Transmissions sometimes have problems and battery changing, etc isnt easy. I have had 2 concordes and 2 intrepids, as well as a van from chrysler and for the most part they are fine except the transmissions. have had to change the transmission in 2 of the cars and the van (which takes a different one). Engines are good if taken care of. Rick

Jul 04, 2009 | 2000 Dodge Intrepid

1 Answer

Does speed control senor make transmission not shift into


Hi...
If the speed sensor Not work on a Automatic Transmission.
The over drive will not work.
The over drive is a SENSOR Located inside of the Transmission.
On vehicles with 3.0 liters.
On vehicles with 3.3 0r 3.8 liters, Is Part of the selenoid pack.
But if you have a 3.3 or 3.8 Liters.
Most cases the transmission will not go up shifting.
it will Stay on 1st or 3r.

If your van is a 3.0 liter , I will recomend replace the speed sensor.
Located At Right side of the Trans. on the firewall side.

if you have 3.3 or 3.8 liters.
I recomend replace the Input and Output shaft Speed sensor.
Located at left side of the Transmission. Behind the Selenoid Pack.

The first step I recomend Is get the Vehicle scaned with a Diagnostic scan tool.
To know exactly what is the problem.
Is there some autoparts That do scan on vehicles with no charge
Just a Complementary service.
Advance autoparts, Autozone autoparts, Pepboy's Autoparts.
And some Napa Autoparts.

OK. I hope this help on your problem.
Thank you for use fixya....

Jan 29, 2009 | 1996 Chrysler Town & Country

Not finding what you are looking for?
2000 Chrysler Cirrus Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...