Question about 1991 Dodge Caravan

1 Answer

Both headlights and signal lights all of a sudden not working. have checked fuses already they are all good ?

Posted by on

  • haunna Oct 25, 2008

    driver side blinker and driver side and pasenger side dims not working but brights will.

  • wildchild547 Nov 17, 2008

    brake lights and signal lights working fine, but headlights not working (low and high)

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You won't like the answer, but the most likely culprit is the multiswitch (Turn signal and dim/bright) on the steering column. If you have a set of jumper wires and a diagram for the light system you can jump across the switch and check to see if the lights work. If they do, then you'll have to replace the switch. Best place to find one is in a junk yard specilalizing in Dodges...


Good Luck

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is turn signal flashing too rapidly?


I'm sure you did already but make sure all turn signals are working, check all of your running lights w/ headlights on then headlights off next Ck the 4 way flashers.. Check headlights too. If all is well R/R the flasher. (located in the fuse box, you'll hear it ticking with the signals on) Good luck

Nov 22, 2015 | Cars & Trucks

1 Answer

I have all light low, high, all turn signals, but my front right (front passenger side) Emergency Light is the only one that works for the Hazard Lights? Fuses check out good and I believe the relay i


What is your year--make--model? I'd look up wiring for hazards if I knew which vehicle? Your hazards may work through multifunction switch? As far as one headlamp being dimmer, check voltage and ground compare to other lamp/s.

Maybe the headlamp lens needs cleaning?

Feb 16, 2015 | Cars & Trucks

1 Answer

95 Dodge Dakota headlights, taillights dash lights suddenly went out. Have turn signals and flashers, no brake lights. Replace 15 amp fuse under dash that was blown nothing, replaced headlight switch


Did you check for voltage at the 50 amp fuse circuit. Even if the fuse is good if no voltage on the fuse circuit, the circuit is still dead. There is a light green wire that carries voltage from headlamp switch to dimmer, is that wire hot with headlamp switch on?

There are wiring diagrams for free, just about everywhere, if you don't have one. Autozone .com has free wiring diagrams on vehicle repair guides link. You have to register your vehicle, year--make--model, all that good stuff. It's free.

Dec 15, 2014 | 1995 Dodge Dakota

1 Answer

Where is 2005 rendezvous dashboard lights and interior lights fuse?


Check the fuse box on the right (passenger) side of the center console. You should be able to identify which fuse it is by checking in the owner's manual.

May 22, 2014 | 2005 Buick Rendezvous

1 Answer

Headlight & turn signal diagram


what make and model is it

Apr 06, 2012 | Cars & Trucks

1 Answer

Both headlamps not working,they both came on momentarily then ceased working, I have checked both the 15 amp fuses in the engine compartment fuse box and both seem okay - any suggestions


I would check the headlight switch. It could be that you are able to turn the running lights on but the headlight position is not working. Using a test light check for power at both sides of the fuse. When using a test light do not just check all fuses as you do not want to use a test light on the air bag fuse(s). If there is no power on both sides of the fuse (and you already check that the fuse is good) then there is a problem somewhere in the electrical. If there is power at both sides, then the next area to check would be the headlight switch. If the vehicle has fog lamps, turn them on then turn the headlights on. The fog lights should come on. If not then you can almost guarantee it's in the switch as it controls both the fog lights and headlights. Pull back on your turn signal switch (or push it forward) to see if the high beems come on. If they do not but the fog lights go out, then it's highly probable that the headlight switch is bad.

Jan 08, 2010 | 2006 Kia Sorento

2 Answers

Headlights Not Working, Brights and Turn Signals Work


This is cuased by the multifuntion switch that is located on the steering column. It is the swith with the headlight dimmers on it.

You just need to remove the steering column bezels and replace the multifunction switch.

Aug 29, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
1991 Dodge Caravan Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...