Question about Toyota Celica
My windows stuck in the up position. I found on my 93 convertible that I had voltage to the rear window regulator motor, but there wasn't adequate grounding so they didnt operate. I confirmed the what/blk wire at the console switch was "open" (ohm to ground =0.0 ohms. I removed the factory terminal from the switch connector and soldered in a pigtail and ran a secondary ground to a bolt from the ebrake mounting bracket and it works fine...if you have a VOM you can check this, but if same problem and no meter just try using a jumper from the switch what/Blm to ground and test. Be careful with your ground wire not to touch other terminals.
Posted on Nov 18, 2014
I had same problem and replaced the switches to open and close windows (bought unit from dealer) and now works perfectly hope this helps
Posted on May 17, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 28, 2012 | 1989 Toyota Celica GT
Aug 18, 2009 | 1992 Toyota Celica
Jul 12, 2009 | 1992 Toyota Celica
May 31, 2009 | 2003 Toyota Celica
May 15, 2009 | 1992 Toyota Celica
Jan 21, 2009 | 1992 Toyota Celica
220 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: