-   Me and a buddy tried to remove the drivers side cv axle, we pulled the hub nut dropped the sway knuckle and control arm. My Haynes manual says to just pull the hub and the cv splines will just pop out, if they stick you just tap end with plastic hammer. We tried and nothing happened we so far as to beat the **** out of it with a small sledge but nothing would get the cv to come out of the hub. I need to replace my cv because I have a bad click/popping sound when accelling in turns. But I ended up having to put it back together and its just like I never took any thing off, this thing hasn't even budged.-   Force_Blade
The temperature controller slide will not allow the heater valve to open all the way to allow the...
(More)
The temperature controller slide will not allow the heater valve to open all the way to allow the heated water to circulate through the heater core. How do I take the front of the dash loose to access the controller to adjust the cable or rod housing on a 1993 Dodge Caravan?
I need the engine serial number to order the correct head gasket set for a 1984 190D. Where is the...
(More)
I need the engine serial number to order the correct head gasket set for a 1984 190D. Where is the serial number located?