Question about 2006 Chevrolet Impala

1 Answer

Won't come out of park.

The shift button on the center console lever will not depress. The brake lights work so it can't be the brake switch. I cannot get the shift lever to move.

Posted by on

  • 4 more comments 
  • Anonymous Jul 27, 2008

    wnet I try to depress the center console button on the stick shift it will come out of park

  • anetta_m_jor Nov 28, 2008

    The shift button on the center console lever will not depress. Car wil not come out of park

  • Anonymous Dec 14, 2008

    2000 Impala stick shift button sticks in the cols but seems better as the car warms up. The other morning (-5 deg C) it took 10 minutes for it to finally depress. Any ideas? Anyone?

  • dog2542 Jan 01, 2009

    06 Chevy Impala won't come out of park.

  • ttricktay Jan 16, 2009

    my 1998 old cutlass does the same thing when it's cold out

  • Anonymous Mar 30, 2014

    how do i change the rear brakes in my 1996 doge atrATUS IM HAVING MOST TROUBLE WITH THE LEVER GETTING IT ADJUSTED RITE

×

1 Answer

Trade it oo

Posted on Oct 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 merc gm shift lever stuck in park car will start steering wheel turns


You have a shift interlock problem . What kind of vehicle ? a mercury what ?
Shift Interlock System
The shift interlock system prevents shifting from PARK unless the brake pedal is depressed. The shift interlock system consists of a shift lock actuator mounted on the selector lever. If the ignition switch is in the RUN position, the shift lock actuator is disabled when the brake pedal is depressed.
If the selector lever will not move out of PARK with the key in the ON position and the brake pedal depressed, it will need to be unlocked manually.
Do the brake lights work ?
Visually inspect for obvious signs of mechanical and electrical damage; refer to the following chart:

Visual Inspection Chart Mechanical Electrical
  • Damaged shift lock actuator
  • Damaged transmission control (TC) switch
  • Damaged shift interlock switch
  • Failed fuse(s):
    • F20 (10A)
    • F22 (15A)
  • Damaged wiring harness
  • Loose or corroded connections
  • Damaged shift interlock switch
Symptom Chart Condition Possible Sources Action
  • Shift interlock system does not release/lock correctly
  • Circuitry
  • Fuse(s):
    • F20 (10A)
    • F22 (15A)
  • Brake pedal position (BPP) switch
  • Brake shift interlock actuator
  • Brake shift interlock actuator module
  • Go To Pinpoint Test A .
PINPOINT TEST A: SHIFT INTERLOCK SYSTEM DOES NOT RELEASE/LOCK CORRECTLY Test Step Result / Action to Take A1 TEST THE BRAKE LIGHTS
  • Apply brake pedal and view brake lights.
  • Do brake lights illuminate?
Yes
GO to A7 .

No
GO to A2 . A2 TEST FUSE F22 (15A)
  • Key in OFF position.
  • Check fuse: Smart Junction Box (SJB) Fuse F22 (15A).
  • Is the resistance less than 5 ohms?
Yes
GO to A4 .

No
GO to A3 . A3 TEST THE CIRCUIT FOR A SHORT TO GROUND
  • Key in OFF position.
  • Disconnect: Brake Pedal Position (BPP) Switch.
  • Measure the resistance between pin 1 and ground.
    s7n~tr~en~file=n0039468.gif~gen~ref.gif
  • Is the resistance greater than 10,000 ohms?
Yes
GO to A4 .

No
REPAIR circuit for short to ground. TEST the system for normal operation
Do

Jun 19, 2016 | 2010 Mercury Grand Marquis

1 Answer

Where is location the automatic transmission shift lock relay in my s10 1998 2.2 2wd


Automatic Transmission Shift Lock Control Description
The brake transmission shift interlock (BTSI) system prevents the automatic transmission from being shifted out of PARK unless the brake pedal is depressed. When the brake pedal is depressed, the BTSI solenoid releases a lock pawl. This enables the shift linkage to move and the shift lever to operate.
When service operations are required, the BTSI system can be overridden.
On vehicles equipped with a column-mounted shift lever, override the BTSI system by performing the following steps:
  1. Turn the ignition switch to the OFF position.
  2. Remove battery voltage from the solenoid.
  3. Turn the ignition switch to the ON position.
For vehicles equipped with floor-mounted shift levers, an override lever is mounted on the right side of the assembly. The override lever can be accessed by removing the shift lever boot. Push the lever to the left in order to override the BTSI.
Which does your S-10 have column or floor shift ? No relay ,has a solenoid .
With Column Shift A/T
The brake transmission shift interlock (BTSI) system prevents the automatic transmission from being shifted out of the PARK position unless the following conditions are present:
?€¢
The brake pedal is depressed.


?€¢
The ignition switch is turned to the RUN or the START position.

When the ignition switch is in the RUN or the START position, the current flows from the B/U Lamp fuse located in the underhood bussed electrical center (UBEC) through CKT 839 (PNK) to the park/neutral position switch. The park/neutral position switch also feeds the backup lamps portion of the switch. With the transmission in the PARK position, the current flows to the BTSI fuse located in the underhood bussed electrical center (UBEC) through CKT 275 (LT GRN). The current then flows to the TCC/stoplamp switch through CKT 584 (LT GRN/BLK). The current continues to the BTSI solenoid through CKT 1135 (DK GRN/WHT). The ground path is provided through CKT 1850 (BLK) to G207. When the brake pedal is depressed, the normally closed contacts in the TCC/stoplamp switch open and the current flow is interrupted. When the current flow is interrupted, the BTSI solenoid de-energizes. The transmission may then shift to another gear. When the transmission shifts to another gear (except PARK), the contacts in the park/neutral position switch open. This condition stops the current flow to energize the solenoid when the brake pedal releases.

Whic

Jun 09, 2016 | 1998 Chevrolet S-10 Pickup

3 Answers

99 honda accord won't shift out of park


Check your brake light function. If that is at fault then your brake light switch may be faulty. If your brake lights are fine then you may have a faulty shift lock solenoid. Some Japanese models of that era have a button or key slot near to the shift lever. If you depress that then it should manually release the lock and allow you to move through the gears, until you move back to 'P' position at which point it will lock again.

Jul 04, 2014 | Cars & Trucks

1 Answer

I have a Lexus RX300 1999 model and have this recent problem. engine running normally but gear gets stuck in Parking mode and won't shift. had to depress the emergency button on the gear shift and


Hi there,

Some automatic vehicles rely on the brake switch (mounted on brake pedal) to be activated by depressing brake pedal. This signal then operates a relay and switch, to release the gear lever.

Firstly, I would check the brake pedal switch (are your brake lights working?).

If brake switch is confirmed OK, then inspect the relay (and related circuit components) of the gear release switch.

Mar 04, 2013 | 1999 Lexus RX 300

1 Answer

Unable to take out of park position


Do the brake light work? No brake lights and it won't shift out of park. Check your fuses and check for loose wires. Check your brake light switch. If that has failed, you won't be able to get out of park. The other one if the shift lock solenoid which is in the shifter assembly. The brake shift interlock switch prevents the car being shifted from park unless the brake pedal is depressed. Try to apply power/ground to the proper wires & see if it will activate.. If it does, then the problem is between the brake light switch & that solenoid. Could be the wires or the switch.Make sure the shifter cable is still held down in place at the shifter assembly & under the hood. It is the interlock switch that you hear/feel clicking.It is for the prior generation but may still apply.

Good Luck and hopefully you soon will be on the road again...;-)

porsche parts

May 27, 2012 | 1995 Ford Aerostar

1 Answer

The lock button on the gearshift will not unlock on my 2002 Chevy TrailBlazer. I read online that I should press an orange lever under the center console but when I looked in there I found the lever on...


Since the lever is obviously no help, try this:

BRAKE LIGHTS AND SHIFT LOCK
Look under the dash, on the brake pedal arm. There are one or two switches that activate brake lights and/or shift unlock. Check for loose mounting nut or a missing rubber nubber. Is the brake pedal coming all the way back up? Look on the floor for something not usually found there. These switches are adjustable and it may be as simple as adjusting them. Have a helper look for brake lights on and shift lever unlocked while you push and release the switches with your finger. Depress the brake pedal to get it out of the way. Remember to set the park brake first. Could just be a bad switch or loose connector. Check fuses and the bulbs. Is shifter fully in Park?

Aug 20, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

When I start engine then depress brake pedal and try to depress shift lever button I can't get it ou of park. This happens 6 times out of 10.


In the area of the shifter (in the center console), there is a shift lock solenoid that is activated by the brake switch. This solenoid prevents shifting out of the Park position unless the brake pedal is depressed. Your problem could be either the brake switch or the solenoid. I would try replacing the switch first.

Sep 09, 2010 | 2002 Chevrolet TrailBlazer

2 Answers

When I start engine and depress brake pedal and go to move shift lever I can't depress shift lever button to move out of park. This will happen 6 times out 10.


2002 chevy trailblazer on neutral mode, trailblazer can be pushed easily,but shifter is stuck on park. vehicle will start.the push button on shifter will not engage

Sep 09, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

Loss of blower fan, turn signals and won't come out of park


Check for a blown fuse. This vehicle has a safety feature that allows it to switch gears only when the brake pedal is depressed and the ignition is turned forward. When the brake pedal is depressed it sends a voltage signal to the shift interlock solenoid that then allows it to shift.You can manually unlock the shifter by inserting a pin into the arperture on the left side of the center console. Push the locking lever rearwards to allow the selector lever to be moved.Also check to see if your brake lights are working this is where the shift interlock solenoid gets the voltage from if they are working chances are the shift interlock solenoid has gone bad.

Jan 04, 2010 | 1995 Mercury Mystique

1 Answer

Cannot move shifter


Have someone stand at the rear of the vehicle and have them check to see if your brake lights illuminate when you depress the brake. If not, you either have a bad brake lamp switch or a blown fuse. If there is no power in the brake light switch, there will be no power transmitted from the brake light switch to the interlock solenoid on the shift lever. That is why you have to press the brake pedal to get it out of park when it is operating normally. The brake light switch sends power to the solenoid, and it retracts, allowing you to remove the shifter from park. Check the brake lights & get back to me.

Aug 22, 2008 | 1992 Toyota Camry V6

Not finding what you are looking for?
2006 Chevrolet Impala Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...