Question about 1995 Dodge Neon

3 Answers

Reverse wont work properly, sometimes have to pull hard

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Try a trany flush worked for me

Posted on Feb 21, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Were do i find a 1995 dodge neon free manual download.

Posted on Jan 28, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 321 Answers

The transmission type wasn't specified as to manual or automatic,as both were available on 91-96 Stealth's,but from the complaint,i presume manual trans.If it is the manual trans,5th gear and Reverse gear are usually on the same shift rail.So part of the diagnosis is to pay attention to 5th gear for any problems.Another part of the diagnosis is the clutch pedal and hydraulics that activate the clutch.When the problem is happening,try this:pump the clutch pedal rapidly,and repeatedly,then try to engage Reverse.If it goes right into Reverse,then the clutch hydraulic system needs to be inspected.Good luck.

Posted on Jul 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C3 picasso can jump out of reverse if not rammed in hard


Transmission problem. I suggest getting it serviced or put a new transmission in it

Mar 18, 2013 | Cars & Trucks

2 Answers

Manual transmission hard to shift in first and reverse


Now assuming all the parts were correctly installed and the proper parts, are you sure the clutch fluid was bled properly? if there is even a bubble of air in there the clutch wont 100% disengage and cause more issues in 1st/rev. Some clutch systems need to be bled in a specific way and may not be as simple as others.

Dec 23, 2017 | 1996 BMW Z3 Roadster

1 Answer

Reverse lights on Opel Corsa Classic 2000 model not working


check to see that when you put the car into reverse that it is hitting the switch and pressing it in properly, you may need to adjust the switch for it to make proper contact

Nov 20, 2011 | Cars & Trucks

1 Answer

I have the 1.7L diesel in my boat. The turbo seems to stick-sometimes open so can,t really get going. Sometimes it seems to overboost on my guage. I can pull on the little rod going to the turbo which...


I tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids for forward and reverse work.
I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com

Feb 25, 2018 | Isuzu Impulse Cars & Trucks

1 Answer

Wont shift into reverse while running and shifts hard into other gears


Assuming its a stickshift (you didn't say) it's likely your clutch isn't working properly...either low fluid level or clutch is worn.

Jul 11, 2009 | 1987 Jeep Wrangler

2 Answers

Hard to get into reverse


try shifting in to first and then reverse. reverse might be worn out. you can have that gear replaced without replacing the whole transmission.

Jun 19, 2009 | 1998 Jeep Wrangler

1 Answer

1997 cavalier w/automatic, and wont shift out of 2nd gear.


Need to pull codes 1st, the electronics of the transmission can cease all proper operation of the transmission. Have the DTC's checked before proceeding.

Dec 17, 2017 | 1997 Chevrolet Cavalier

1 Answer

All my gears work fine but i wont go into reverse 1997 jetta


if your trans engages properly in fowards and not into reverarse then you have a worn clutch in the trans and the trans will need to be rebuilt

Feb 01, 2009 | 1997 Volkswagen Jetta

Not finding what you are looking for?
1995 Dodge Neon Logo

442 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...