Question about 1997 Dodge Intrepid

1 Answer

Replacing water pump, found crack in water hose, how do I replace the hose? What does it entail?

Posted by on

1 Answer

It entails you to buy a new hose and replace yourself for the fraction of the cost of a mechanic they are really not that hard it should be placed behind the timing chain

Posted on Sep 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Harmonic balancer /water pump


most water pumps I believe have a weep hole that drips out coolant basically letting the person owning the car know that it is time to change the water pump. but then again have you checked to see if the water pump hoses are secure and aren't cracked?

Jul 06, 2013 | Honda Cars & Trucks

1 Answer

Antifreeze leak behind timing cover


Try replacing water pump gasket and or you might have a cracked water pump try replacing the water pump itself

Dec 11, 2012 | Cars & Trucks

1 Answer

I just replaced a hose after losing water. After replacing the hose I have put about 5 galloons of water into it after running and stopping to top it off. Last time I found water leaking from the side of...


usaully a hole near the shaft of a water pump is a weep hole and if water or antifreeze is coming out, your water pump seal is bad and pump needs replaced.

Jan 24, 2011 | Honda Accord Cars & Trucks

1 Answer

04 ENVOY,REPLACED SECONDARY AIR PUMP AND BLEW OUT SYSTEM, REPLACED FUSE AND STILL PUMP IS FILLING WITH WATER, CHECKED ALL HOSES AND FOUND NO CRACKS, WHAT ELSE SHOULD I CHECK


The water comes from exhaust system /condense/ because the check valve does work properly. The check valve is located on left top side of the engine where the hoses from the air pump connect to the exhaust.

Apr 01, 2010 | 2004 GMC Envoy

4 Answers

Anti freeze/coolant leasking from the front lower part of the engine, is this the end of my motor???? Its 2000 LHS w/3.5 ltr. V6, thanks.


It sounds from what i can make out that it's leaking from your water pump and will need to be replaced if you mean the engine of the engine where the serpentine belt is. Before you go replacing the water pump, inspect the hose clamps first to ensure that you cover all bases. Good luck and keep me posted, and don't add any radiator stop leak. They just clog up the coolant jackets and restrict the flow of coolant.

Feb 23, 2010 | 2000 Chrysler LHS

1 Answer

Lower radiator hose leak at water pump housing


water pump housing is cracked ,replace the water pump

Apr 11, 2009 | 2002 Chevrolet Suburban 2500

2 Answers

1992 Ford Crown Victoria water leak out of bottom of engine after replacing water pump


You either have a leak from the pump area or one of your hoses is leaking. Start your motor and watch for where it is leaking from.

Mar 14, 2009 | 1992 Ford Crown Victoria

3 Answers

Change a water pump


1. Remove negative battery cable
2. Open radiator valve - drain cooling system
3. Remove cooling fan and shroud
4. Remove belt
5. Remove water pump pulley from hub
6. Remove hoses from water pump
7. Loosen heater hose coolant return tube mounting bolt and nut.
8. Remove the tube. Lose the O-Ring.
9. Remove water pump mounting bolts
10. Loosen the clamp on the bypass hose.
11. Remove the hose as you pull the pump away from the engine.

Hope this helps

Mike

Jun 14, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Dodge Intrepid Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...