Question about Dodge Stratus

1 Answer

Rear Tires wearing on inside and shaking on the highway

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

Whenever tires wear on one side of the tread it means the car is out of alignment. Maybe the problem can be solved with an adjustment or possibly frame work has to be done.

Posted on Oct 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my the rear end of my car shake at highway speeds?


have the rear suspension bushes checked out including the shockies.
I would also suggest a rear end wheel alignment and a wheel bearing check

Jun 19, 2015 | 2006 Hyundai Sonata

1 Answer

Shaking in rear end of vehicle


Were the tires new or used tires? if used I would check the tires for cupping or uneven wear. if new tires have them rebalanced. If this was helpful please leave good feedback

Jul 14, 2013 | 2004 Ford Taurus

1 Answer

99 ford taurus rear tires wearing onthe inside.how do i fix


It sound like the Camber is off in the rear. Did you have an alignment done after the new struts wear installed?

Jan 03, 2013 | 1999 Ford Taurus

3 Answers

1999 silverado rear end shakes at all speeds. put brand new tires n balanced


You should have an alignment on all 4 wheels. Check that the rear axle has not shifted forward or backward on one side. If you have Rear Disc Brakes, have the Hub & Rotor checked for alignment. Does this shaking happen all of the time or just when turning? Does it only happen when you apply the brakes? A Rotor and Hub that is out of alignment will cause shaking. Also check that the Caliper Slide Bolts are lubricated, otherwise the caliper will not operate correctly and the inside of the rotor will wear out faster. This can cause shaking also.

Jun 04, 2012 | 1999 Chevrolet Silverado 1500

2 Answers

Rear of car shakes at highway speeds


tires not balanced or needs alignment

Aug 02, 2010 | 2000 Nissan Maxima

2 Answers

Steering wheel shimmy at highway speeds


This sounds like tie rod ends are going out. Before you remove the old ones, mark on the threads where it currently is seated or you will throw it out of alingment when you put new ones on. You may need to borrow or buy the tool for poping out the tie rod end. They aren't a big deal to change if you have some basic tools and sometimes you don't need the wedge tool either. Once you get the old one out, try moving it around. If it is real loose and moves easily, thats your problem. But the swaying you are describing sound like this is the problem. Could be you steering control arms as well but because the inside of the tires are worn I doubt it.

Oct 12, 2009 | 2004 Suzuki XL-7

3 Answers

Whenever I go above 60 mph on the highway my steering wheel shakes or vibrates. This has happened before and I had to get my rotors turned. Could it be that I need new rotors? If so, what's the best brand...


Rotors will only cause a shake when braking. Your problem is more than likely out of balance tires.

The best brake components are usually the ones that cost the most.

Sep 29, 2009 | 2006 Chevrolet Cobalt

1 Answer

Nissan Frontier 02 ABS LIGHT AND BAD SHAKE ON HIGHWAY Wheels are all balanced, brakes, rotors are replaced now. It will be running smooth on highway, but at varying times, highway speeds, it will start...


i would start with checking the axles because most of them have a abs ring on them which will trigger the abs light. also make sure your axles are in good shape. last resort would be that you need new tires because the steel bands inside are starting to seperate. good luck

Sep 22, 2009 | 2005 Nissan Frontier

2 Answers

Car shakes at highspeed, wears inside of tires


Sounds like its either your "camber angle" or your tires aren't balanced correctly

Nov 24, 2008 | 1991 Oldsmobile Cutlass Ciera

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...