Question about 2000 Toyota Camry

1 Answer

Toyota Camry 2000, break problem inconsistent

I have 2000 toyota camry, 45000 miles used, ABS break system
My car breaks applies if I pedal slightly, but i have experienced couple of times on the same day continuosly, breaks were not applied when i pedal it little and car was stopped when i pushed the break pedal completely down.

It happened 15 days back. I see breaks are working normal after and dont see any issues.

Is it due to break oil or break pads or some this else?

I had gone to mechanic and he did a test drive and said everything is fine.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 45 Answers

Could be a number of things. A lot of times the ABS sensors at the wheels get dirty. This is due to them being magnetic and a lot of brake pads are semi metallic so the dust sticks to the sensors and makes them fuction a little weird. Have someone clean the sensors. I try to pressure wash them everytime I wash the car. Hope this helps.

Posted on Aug 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot take out of park 1990 toyota camry


I know for sure in some VW/AUDI models you cannot shift gears if stop light system is faulty, That could be the same system applied to your car. Correct that fault first and check.

Apr 01, 2014 | 1990 Toyota Camry

1 Answer

Cost to repair timing cover leak and power steering gear leak for 2005 Toyota Camry


PLEASE SEND ME SERIAL KEY FOR CARDRECOVERY V6.10 BUILD 1210 URGENT ON
keyurkateliya39@gmail.com

Dec 23, 2013 | 2005 Toyota Camry XLE

1 Answer

I have a 2000 toyota camry le 4cyl. and when i brake just before the car stops it feels like the breaks let go and then re-grab . i have changed out the rotors and pads, have bled the system. any...


sounds like a problem with the abs controller don't kill me but you may need to take it to the dealer to have it checked out unless you have diagnostic equipment

Sep 29, 2013 | 2000 Toyota Camry

1 Answer

2000 Chevy K3500 No Breaks. Bled breaks, not losing fluid, ABS and break lights on. Hydraulic booster system. makes hissing sound when breaks applied???


I think I would get the body computer scanned for trouble codes and find out why the ABS warning light is on first.
The hissing noise usually means the booster is leaking vac but if the booster was faulty the brake pedal would be hard to push.

Feb 09, 2013 | 1998 Chevrolet Blazer

1 Answer

ABS light on, flashing 4wd 2005 Mazda Tribute


Even though your anit-lock brake system light comes on, dosen't mean your brakes will not work. All the ABS does, when applying the breaks, it compensates breaking power like pulsating your pads off and on the rotor in which without ABS your doing the same thing manually by pressing n releasing the brake pedal. And usually half the time it's a sensor that goes out and can be checked at your local autozone or auto parts store where they can plug into your car and will display a code that pertains to your ABS problem. Hope this helps.

Oct 16, 2012 | 2005 Mazda Tribute 3.0s

2 Answers

Brake esemble diagram


Hey Stan the man,need your vehicles info.,year,make,model and engine size and Tommy on the spot here will send you a picture diagram of your rear brake assembly.There's a special spring tool you can get at auto parts store to remove and install springs,me got one.

Oct 15, 2012 | Cars & Trucks

1 Answer

The Service Vehicle light and anti-lock brake and Traction Cntrl light comes on after I drive the car for about two mile. I like to know why? I took to the shop and they said the brakes were fine. But the...


If the the abs module fails you still have breaks BUT if you need to apply the breaks to the floor the abs will not work which could allow you to go into a slide because of loss of traction. the abs system pumps the breaks to prevent your tires from locking up

Sep 15, 2011 | 2000 Oldsmobile Intrigue

1 Answer

I have 94,000 miles on my 2004 Toyota Camry Solara. Do I need a Timing belt at this time. What else is essential at this time? I am trying to save money.


i would replace the belt. if the belt breaks you could bend the valves. i had mine break at about 102,000. bent 4 valves.

Dec 09, 2010 | 2004 Toyota Camry Solara

3 Answers

200 Camry LE, 77,000 miles. Rattling noise over bumps, car front end dives when breaks are applied hard, Car bounces a couple times when human oushes on front end


This sounds like a bad strut, one or both on the front has gone bad. Here is a picture of just the strut with out the spring. The price ranges from $65.00 to $220.00 depends on what you can afford. mcneb_0.jpg

Nov 21, 2010 | 2000 Toyota Camry

Not finding what you are looking for?
2000 Toyota Camry Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...