Question about 1989 Oldsmobile Cutlass Ciera

3 Answers

Turning signals have quit flashing. bought a elecronic flasher but not a clue where it goes

Posted by on

  • 1 more comment 
  • Anonymous Jul 27, 2008

    Found the turn signal flasher behind the ash tray. I can't remove the old flasher to install the new one, the plug just wont pull off. How do I remove the old flasher?

  • ksboo Aug 27, 2008

    I have the same problem, my turn signal does nothing. I could not even find the flasher, to check that out.

  • Anonymous Oct 09, 2008

    I can't find my flasher. I will look behind the ashtray again. Someone else told me on the bracket above the accelerator but I couldn't find it there either!!

×

3 Answers

I found the flasher behind the ashtray. After changing it, turn signals worked fine.

Posted on Oct 18, 2008

I found the turn signal flasher behind the ashtray in my 89 Olds. After I changed it, the turn signals work fine.

Posted on Oct 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to use a pair of vise grips on the receiver to get a good enough grip and pull the plug like heck. There is another flasher for the emergency flashers located to the right side of the glove box (glove box has to be removed) on the far side of the alarm box for "keys left in ignition"

Posted on Oct 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The hazard back lights wont quit blinking when car is running even when i pull the fuse on a 2002 buick regal


What fuse are you pulling ?

Hazard Lamps
The hazard warning switch is part of the turn signal switch. The turn signal switch receives battery voltage at all times through the HAZARD SWITCH Fuse. When the hazard switch is placed in the HAZARD position, battery voltage is applied to the hazard lamp/turn signal lamp flasher. The hazard lamp/turn signal lamp flasher sends a turn signal flasher signal to the turn signal switch. The turn signal switch provides all of the turn lamps and turn indicators with the turn signal flasher signal, simultaneously flashing them on and off.

Turn Signal Lamps
The front turn signal lamps are made up of the front park/turn signal lamps and rear turn signal lamps. The front turn signal lamps flash with the rear turn signal lamps when a turn is initiated using the turn signal/multifunction lever. The turn signals will operate only with the ignition switch in the RUN position and will not operate during hazard flasher operation.
When the ignition is turned to the RUN position, battery voltage is supplied to the TURN SIGNAL Fuse. Battery voltage is then applied through the turn signal fuse circuit to the turn signal switch. When the turn signal switch is placed in the LH or RH position, voltage is supplied to the hazard lamp/turn signal lamp flasher. The hazard lamp/turn signal lamp flasher supplies a turn signal flasher signal to the turn signal switch. With the turn signal switch in the LH or RH position the corresponding turn signal indicator, rear turn signal, and front turn signal receive the turn signal switch signal and will flash. The front turn signals receive the turn signal switch signal from the turn signal switch via the BCM. The turn lamps are permanently grounded.

Replace the turn signal switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt.

Feb 11, 2017 | Buick Cars & Trucks

1 Answer

My turn signals sometimes will quit working then I have to hit the hazard lights button leave it on and then turn my turn signals on then they work what causes this to happen


When the turn signals quit working pull up , down , front to back an back to front on the turn signal switch handle . Do they work when doing this ? Pontiac had bad switch . The power for the turn signals goes through the flasher / hazard module . Could be the switch or the module.
The HAZARD LPS fuse in the left hand instrument panel (LH IP) junction block supplies battery positive voltage to the flasher module, which is part of the hazard switch assembly. The TURN LPS fuse in the LH IP junction block supplies ignition positive voltage to the flasher module. The turn signal lamps may only be activated with the ignition switch in the ON position. When the turn signal switch is placed in either the left or right position, current flow is from the flasher module's output to the turn signal switch assembly. The flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators.

Mar 12, 2016 | 2001 Pontiac Grand Am GT

1 Answer

I just bought the car the turn signals work in the front but not in the back whats the problem?


Have you checked the bulbs already?
Don't know what kind of car you are dealing with here.
Most vehicles - the brake lights and rear turn signals share the same electrical circuit to the rear tailights. Usually the turn signal switch will separate which signal goes to the back.
Do your brake lights work? Is there a High mounted stop lamp and does it work?
I have seen a Hazard Switch be ON and fuse blown causing the Hazard Flasher to be inop - which prevented the turn signals from working. Turning OFF the hazard flasher brought back the T/S.
Check the rest of the lights - see what does and doesn't work - and do the front turn signals flash? Stay On? Or flash really slow?
Let me know what you find out and if this helps you at all.

Mar 12, 2015 | Cars & Trucks

1 Answer

4 ways dont work were is 4 way flasher located


fuse box. next to flash fuse. check fuses first.
the flashers rarely fail , they are elecronic, but no year stated. so...??

Jan 18, 2014 | Acura Integra Cars & Trucks

1 Answer

Turn Signals quit working


Sounds like the turn signal flasher is going bad. The easy way to find wher the flasher is hidden is turn the turn signal on and find the clicking, that is the flasher. The emergency flashers work fine because they use a different flasher.

May 05, 2010 | 2000 Audi TT

1 Answer

Turn signals have quit flashing bought new


It should be under the dash, driver's side on firewall.
It should look very similar to this...

505908d.jpg

Dec 01, 2009 | 1999 Ford Expedition

3 Answers

Electronic flasher location on 2003 mustang gt


for the most part its under the dash on the driver side give these websites a try www.autozone.co and www.alldatadiy.com if all fails stop by your local Ford dealership in the parts department and they will print you out pictures and diagram showing you where its located wish you the best Michiagn Man.

Nov 07, 2009 | 2003 Ford Mustang

1 Answer

Signal Lights - flasher...


Hi it sounds like the multifuntion switch
never had one on a monte carlo before but lots of grand am and malibu
hope this helps

Mar 23, 2009 | 2002 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...