Question about Toyota 4Runner

1 Answer

THE GEAR SHIFT WILL NOT STAY IN THE GEAR IT IS PUT INTO

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I was inquiring about this problem for a friend of mine, he went to the Toyota Dealership and the Automotive Tech's told him what to do. Thanks for your concern

Posted on Aug 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gear shift stuck


Hello Crystal,
It might be the Safety Switch that is defective.
Take to a transmission shop for further diagnostics
Best of Luck!
JP

Jul 05, 2015 | 2006 Hyundai Sonata

1 Answer

When you put the car in gear to drive the letter M is beside the letter D for driving??


It stands for "Manual". It allows you to shift gears manually, without a clutch, for those performance oriented drivers. You can also use it to stay in low gear for climbing steep hills or driving in snow. Once you shift into "M" by moving the stick to the left of the "D" position, you should see a number "1" just above the "M", letting you know you're in first gear. Pushing the stick forward or backward shifts gears.

Jan 08, 2015 | 2009 Cadillac CTS

1 Answer

How to fix ram 1500 2005 transmission that sometimes gets stuck in 3rd gear. from start to finish truck will stay in 3rd gear.


When did you last replace trans filter and fluid? Dirt may be causing shift valve to stick.

Dec 28, 2014 | 2005 Dodge Ram 1500

1 Answer

In manual mode, is the tiptronic supposed to stay in the gear you choose until rev limit is reached? Or will it shift up on its own before the limit is reached?


It will only downshift on its own, it will stay in the selected gear until the RPM is too low and downshifts or until you manually shift to a higher gear.

Jun 06, 2011 | Porsche Boxster Cars & Trucks

2 Answers

My saab won't stay in fith gear


Internal transmission problem. Shift fork, slide, or gear.

Jan 30, 2010 | 1995 Saab 900

1 Answer

Transmission not shifting on its own.


check the shift solenoids by using a OHM METER .the both solenoid connectors has 2 terminals 1 and 2 .take ohm meter measure terminal 1 resistance to body ground it should be 14-30 ohms.if less or more replace it.then number 2 terminal to ground.do both the connectors that you disconnect.they should be 14-30 ohms.if less or more replace them.if they check out good .your valve body in transmission is going have to be removed.

May 25, 2009 | 1992 Honda Accord

1 Answer

Gear linkage loose so wont stay in park, car rolls


loosen up the linkage at the transmission a little,click the linkage i click on the transmission(shift it manually to reverse),put the gear selector in the car in reverse,then tighten the linkage.see if that helps.

Apr 26, 2009 | Ford Taurus Cars & Trucks

1 Answer

Atomatic transmission won't only has second gear


Sounds like you have a solonoid out in your transmission. No simple fix for this. You will more than likely have to drop the transmission to replace solonoid.

Apr 24, 2009 | 1993 Mitsubishi Diamante

1 Answer

My 92 honda accord will not go into 1st 3rd or 5th gear


check shift fork adjustment. make sure you bleed the slave cylinder.also check shift cable adjustment.

Apr 11, 2009 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...