Question about Dodge Ramcharger

1 Answer

1993 dodge ramcharger, emergency brake light turns on when power window switch depressed, window does not go down. also light turns when climate switches are pressed but fan does not turn on. Compressor and vacuum systems working fine. 12v present at both locations as well as ground. Both fan and window motors jumped with wires directly to battery and function fine. Help I am stuck it makes no sense. Optional Information: 1993 Dodge ramcharger 318 Already Tried: tested the following: for 12v at fan and window motors -passed ground at fan and window motor -passed jumpers to fan motor direct to battery -passed

Posted by on

  • sqwatch13 Jul 25, 2008

    Took me until now to find a new ignition switch, drive and hour to get it, drive back and put it in. Still does not work, :( any more help/ideas?


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi again,

Any developments?

Posted on Jul 25, 2008

  • Louie  Role
    Louie Role Jul 25, 2008

    Glad to be of assistance and appreciate the review.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1986 dodge 3/4 four wheel no brake lights have turn signals running lights power to the switch and new bulbs

Turn signal and brake lights operate from a different switch. The brake light switch is under the dash behind the brake pedal. Look under the dash and follow the brake pedal up until you see a switch which the pedal operates. Normally a white plastic switch with two wires. Disconnect the two wires and touch them together. If brake lights come on replace the switch. If not use a 12 volt test light to see if there is current to one of the wires. If not, check for a blown fuse. This should solve your problem. If not, contact me for further information,

Feb 26, 2014 | 1986 Dodge Ramcharger

1 Answer

What does it mean if the brake light in the cab of the truck is on?

It means the emergency brake is on or slightly depressed. Try wiggling it to see if light flickers. Or you are low on fluid, or have a leak and it's sensing the pressure loss.

Apr 27, 2012 | 1993 Dodge Dakota

1 Answer

I just replaced the instrument cluster on a 1985 dodge ramcharger. now the brake and the engine maintenance lights are on. how do i reset these lights??

The brake light has only two things that can make it light up one the emergency brake is on or two low fluid in the master cylinder.

Jan 20, 2012 | 1985 Dodge Ramcharger

1 Answer

Break lights quit working

down below the brake pedal is a brake light switch, there is a tab on the brake pedal that pushes it in when you let off the brake turning off the brake lights. replace this switch and your brake lights should work

May 04, 2010 | 1984 Dodge Ramcharger

2 Answers

I have a 1986 Dodge Ramcharger. The tail lights don't work. All other lights function,brakes, turnsignal, headlights etc. Changed light switch, checked connections, changed bulbs. Still no taillights. Any...

check fuses. If fuses are good use a voltmeter at the connections to see if you are getting power. If you are not then you will have to run down a short in the wire.

Apr 22, 2010 | 1986 Dodge Ramcharger

2 Answers

1987 dodge ramcharger 4x4 318 2bbl,auto,no headlights/tailights

Check all fuses, plus connections of any smaller gauge wires at battery posts.

Nov 16, 2008 | 1985 Dodge Ramcharger

1 Answer

1986 dodge ramcharger

Check for power with 12VDC test light at switch down at the brake pedal. Should have power on one terminal without pressing pedal, then press pedal and see if power going through switch to other terminal. If going in but not coming out, replace switch. Can use jumper wire between the 2 connectors to confirm brake lights come on.

Oct 22, 2008 | 1986 Dodge Ramcharger

1 Answer

Dodge wiring problem

Hi again,

Run a new mains B+12 from the battery + terminal/post, tape it to the original harness, through the firewall, under the dash, up the steering column and to the "B" terminal of the IGN switch. It would seem that you have a multiple electrical issue and perhaps that is what the dealer is referring to as "cost more to actually find the problem" you mentioned in our Live Session.

Installing a new mains B+12 would be easier/faster than tracing the old one.

Jul 25, 2008 | 1993 Dodge Ramcharger

1 Answer


wrong brake pads or completely worn brake pads hardware is not tentioning back make sure the emergency is all the not depressed this can also bundle the brakes up

May 15, 2008 | 1993 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

74241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7207 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides