Question about Honda Accord

1 Answer

ABS Light gives out three codes,Where can I get a list of codes to trouble shoot by?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Most Honda ABS warning light will blink in 2 parts, main system and then sub system to form the code pair. As an example is 3 blinks then 3 blinks is a code 3-5. Once determined, reference below listing.
1 - ABS pump motor over-run
1 2 ABS pump motor
1 3 high pressure leakage
1 4 pressure switch
1 8 high pressure system
2 1 parking brake
3 1 pulser RF
3 2 pulser LF
3 4 pulser RR
3 8 pulser LR
3 12 different diameter tires
4 1 wheel sensor RF
4 2 wheel sensor LF
4 4 wheel sensor RR
4 8 wheel sensor LR
5 - rear wheel lock - R/L
5 4 rear wheel lock - R
5 8 rear wheel lock - L
6 - fail-safe relay - F/R
6 1 fail-safe relay - F
6 4 fail-safe relay - R
7 1 solenoid - RF
7 2 solenoid - LF
7 4 solenoid - R
8 1 ABS function
8 2 CPU comparison
8 4 IC self-check

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jul 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn off abs light on 1997 buick skylark


Well the ABS light(Anti-lock Brake System) light when lit means the computer has stored a trouble code. Also, this means the ABS system is off-line. The brakes function as usual but have the possibility of locking up in a panic stop situation. So to turn off the light you should take it to a qualified shop that can diagnose the trouble code with a scan tool (most likely a wheel sensor) and give you an estimate for the repair. Get your ABS system working again!
I hope this helps you

Jul 03, 2014 | 1997 Buick Skylark

1 Answer

2001 Acura mdx abs light stays on. Code reads 04?


I think you pulled the code incorrectly, or are reading it wrong. To get code:
1. Jump pins 4 & 9 on OD2 connector.
2. Turn key 2 clicks.
3. ABS light should blink to give you code. (long blinks for first digit, short ones for second. Example: One long blink and three short blinks would be 13).
Honda ABS trouble codes list :
11= Right front wheel sensor (open/short to body ground/short to power)
12= Faulty right front wheel sensor pulse signal
13= Left front wheel sensor (open/short to body ground/short to power)
14= Faulty left front wheel sensor pulse signal
15= Right rear wheel sensor (open/short to body ground/short to power)
16= Faulty right rear wheel sensor pulse signal
17= Left rear wheel sensor (open/short to body ground/short to power)
18= Faulty left rear wheel sensor pulse signal
21= Continous Operation (chipped pulser)
31-38 are all the same: "solenoid"
51= Motor lock
52= Motor stuck off
53= Motor stuck on
54= Main realy stuck off
61= Ignition voltage
81= CPU (central processing unit)

Jul 03, 2013 | Cars & Trucks

1 Answer

07 Chevy Silverado The motor caution light came on then came on the ABS light. seems like it's in third gear I hooked up the Solis I am getting three trouble codes one under the engine one under tran


Try checking the abs madule, that could be causing all the problems, such as the trans code and engine code. Also check the grounds cable maybe rusty or lose. I had a Chevy Tahoe and it was almost the same problems and it turn out to be the abs madule. Hope this helps good luck.

Feb 06, 2013 | Cars & Trucks

1 Answer

Abs and trackson contral light is on


Any time there is a problem with the abs system the traction control light will also come on. Your best bet is to scan the abs module for trouble codes. This will give you a m uh better idea of what the problem is. You have three options. You can buy a code reader capable of reading abs codes. This will run you a couple hundred dollars. You can see if you local parts store can pull the codes for you. Many times they will do this for free. You can have a shop pull codes and run a diagnostic to pinpoint the problem.there is usually a set fee for this. Once you know the cdes post them here. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Jan 08, 2012 | Cars & Trucks

1 Answer

A light is flashing on my dash. The light is ABS. What does that mean?


Hello! There is a trouble code stored in On Board Diagnostic (OBD)
II...Take the vehicle to an auto parts store and have them scan for the code...Here is a list of ABS trouble codes...Guru...Saailer

d719fdc.gif

Oct 04, 2010 | 1997 Ford F250 SuperCab

2 Answers

Abs light staying on, please give possible problems


Hi, this will be very tough to diagnosis without scanning the trouble codes. this could be as simple as a damaged wheel speed sensor or as major as a defective ABS unit. Have the system scanned for ABS related trouble codes to be sure.

Jul 22, 2009 | 1995 Toyota Previa

1 Answer

ABS light and trac control light off


YOU NEED TO HAVE ABS CONTROLLER SCANNED FOR DIAGNOSTIC TROUBLE CODES..THE SYSTEM HAS DETECTED A FAULT..A GOOD SCAN WILL YOU LEAD DOWN THE PATH TO FIXING THE PROBLEM..YOU CAN SEE IF WHEEL SPEED SENSORS ARE NOT WORKING,IF YOU CAN'T COMMUNICATE WITH CONTROLLER,ETC..LET ME KNOW WHAT IS FOUND

Jun 11, 2009 | 2003 Chrysler Town & Country

1 Answer

ABS light


It is picking up a signal from one of the wheel sensors probably.

Go here to read files on ABS issues

http://autos.groups.yahoo.com/group/villagerquest/

  • Anti-Lock Brake Warning Indicator Always On
  • Fuse(s).
  • Circuit.
  • Hydraulic solenoid relay.
  • Hydraulic pump motor relay.
  • Brake anti-lock sensor(s).
  • Hydraulic anti-lock actuator assembly.
  • Anti-lock brake control module.
  • GO to ABS Quick Test .

QT5 PERFORM ABS TROUBLE CODE RETRIEVAL
  • Key OFF.
  • Jump Pin 4 of the data link connector to ground.

    5939e8a.gif

  • Key ON.
  • Observe the anti-lock brake warning indicator.
NOTE: The first code to flash will be the start code (12). Also, each code is repeated three times before proceeding to the next trouble code.

Does the anti-lock brake warning indicator flash codes? Yes No RECORD code(s). GO to the following ABS Trouble Code Identification Chart in this section and PERFORM Pinpoint Test specified for first code retrieved. If indicator is illuminated constantly, GO to Pinpoint Test D1 . If indicator is not illuminated, GO to Pinpoint Test A1 .


df42bc3.gif

Jan 02, 2009 | 1993 Mercury Villager

2 Answers

Anti lock brake light


abs relay some times go bad

Dec 05, 2008 | 1999 Oldsmobile Alero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

962 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...