Question about 2004 Chevrolet Cavalier

2 Answers

Changing the clock

The time needs to be changed on my clock. Someone has told me to us the up and down buttons. I have no up or down buttons. There are no buttons that I can see to change the clock in any way. There is nothing in the index of the booklet. Please tell me what to do? Thanks. Judith

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The two buttons on the bottom right are HR and MIN hard to read. with car on and radio off pushin and hold the RCL TUNE button for about 10 sec. then push and hol the MIN button till it changes or beeps.

Posted on Jun 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

On the bottom right hand of the radio clock is etched in the plastic. It is very hard to see. You press the button above the clock and use the buttons you use for the bass and treb setting.

Posted on Aug 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the analog clock on my 2006 Pacifica


Take a small object and push the button down until time is reached
reset-analog-clock-2006-pacifica-gforj5atjwvxe3vijclvf5dv-1-0.jpg

Sep 16, 2014 | 2006 Chrysler Pacifica

1 Answer

1998 bmw 328i input time light is on


You need to set the clock. Press and hold the "Clock" button then use the 1,10,100,1000 buttons to change the time. When you're done press the "set" button.

These instructions are for a 93 but the process should be similar for your version.

Dec 19, 2012 | 2003 BMW 325

1 Answer

2001 accent digital clock will not adjust


You will need to remove the clock and have it repaired or replaced depending on what is cheaper.

Aug 25, 2012 | Hyundai Accent Cars & Trucks

1 Answer

Changing time on BMW 320 D SE Touer


Procedures for changing the clock vary from model to model. Usually there is some button on the trip computer that you hold down until the display blinks.
Why not just look in the owners manual?

Jan 20, 2010 | 2004 BMW 3 Series

2 Answers

How to set time on a acura 1991


Lift cover next to clock on dash; hold hr button for 3 seconds until it starts to rotate up; stop at correct hrs. Same for minutes button.

May 27, 2009 | 1991 Acura Integra Hatchback

2 Answers

Want to chnage time on digital clock


Dear Sir!
Beside the digital clock must be 2 switches, one is for hours and the other is for minute, if it is not when the time is 12:00 take out the clock fuse and enter it again the time will be automatic 12:00.
The clock fuse is under stearing wheel.
Hope to hepled you.
Mustafa, Kabul Afghanistan

Apr 26, 2009 | 2003 Toyota Corolla

1 Answer

1985.5 PORSCHE 944 digital clock (changing time)


There are three buttons, let's call them 1, 2, and 3, from left to right.


Clock
Time setting

A. 12 AM, PM or 24.00 h
With the clock in the time readout mode, keep
button (2) depressed for 4 seconds -12 AM, PM
or 24.00 flashing. After pushing button (1), either
a 12-hour (AM + PM) or a 24-hour setting
program can be selected. If you only want to
change the display mode, push button (3). The
clock then returns to its normal timekeeping
function.

B. Hours
Push button (2) a second time - hour display
flashes. Set hour by pushing button (1). After
pushing button (3)*, the clock returns to the time
readout mode with new hour setting.

C. Minutes
Push button (2) once more - minute display
flashes. Set minute by pushing button (1). Upon
pushing button (3)*, the clock is started -
accurate to within 1 second.

Stop watch function
The stop watch can only be set in motion if the
clock is in its normal timekeeping mode and not
during setting operations.
A. Push button (3) - 00:00 display appears;
B. Push button (1) - stop watch is on;
C. Push button (1) a second time - watch stops.
(Additional times can be added by pushing button
(1) again - stop watch keeps running. Push button
(1) once more to stop timing.)
D. Push button (2) - 00:00 display appears;
E. Push button (3) - normal timekeeping mode.

If button (3) is pushed during operation A and
B, the setting procedure must be restarted
(push button (2)). icon_biggrin.gif

Apr 17, 2009 | 1985 Porsche 944

1 Answer

Changing time on clock in 1997 olds bravada


To set the time turn your radio off. Then hit the set button, then seek button changes minutes and scan changes hours.

Mar 11, 2009 | 1997 Oldsmobile Bravada

2 Answers

Need help changing the time on my clock


hi from uk to reset clock ? there are two buttons/stalks? on the speedometer clock the left one is for trip reset and the right one is for clock reset/alter time to alter twist left for hrs reset and right for minutes it springs back to neutral when you let go hope this helps ?

Jan 27, 2009 | 1999 Hyundai Accent

1 Answer

Replaced battery - need to reset clock / radio won't play


My manual said the same thing. Although I have never had the radio stop working on me even after I changed the battery. To set the clock you hold the mode button, like your changing the bass/ treble. Hold it down then it will show clock flashing. From there I cant remember i think i used the arrows by the number pad to change the time. Hope this works for you.

Oct 30, 2008 | 2003 Jaguar X-Type

Not finding what you are looking for?
2004 Chevrolet Cavalier Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...