Question about Hyundai Santa Fe

1 Answer

2001 hyundai santa fe 6 cylinder 2.7 spark plug wiring position from spark plug to ignition coil. 3 coils have the numbers 1-4 2-5 3-6. so what number goes to whst spark plug?

Posted by on

  • 13 more comments 
  • Levi mcphee Mar 04, 2013

    Thank you Juan, the Bus was working fine, i got went to start it, that's when i discover this problem,where is the ignition fuse located?

  • Anonymous Mar 13, 2014

    cause for 2001 ghrand margui 1&3 ignition coil failure

  • Anonymous Mar 14, 2014

    no battery voltage to number 6 cylinder coil f250 2003

  • Anonymous Mar 14, 2014

    no battery voltage to number 6 coil f 250 2003 what would cause this

  • Anonymous Mar 17, 2014

    Number 4 cylinder spark weak at coil on 2003 windstar

  • Anonymous Mar 17, 2014

    making noise and missing noise goes a way ,when, you pull number 2 spark wire

  • Anonymous Mar 18, 2014

    Spark plug wire position on voyager 2001 engine 3.3

  • Anonymous Mar 18, 2014

    THE CAR WONT START AND WHEN THE WIRING IS TESTED WITH A COIL ON EACH CYLINDER cylinder 2 and 4 have no spark

  • Anonymous Mar 19, 2014

    the car is also smoking :blue smoke from exhuast.no oil leak on the car

  • Anonymous Mar 22, 2014

    Witch plug goes to the number 3 cylinder

  • Anonymous Mar 25, 2014

    2007 santa fe

  • Anonymous Mar 26, 2014

    how many ignition coils on 2004 Hyundai xg350

  • Anonymous Mar 31, 2014

    I'm not getting any spark and all the fuses are good and the timing belt is good

  • Anonymous Mar 31, 2014

    Hi
    I have a Santa Fe 2001. I got a code P0306 misfire detected. I changed spark plug everything.I think the problem is A/T cause when I drive the transmission skipping from 2 to 4 from 1 to 3. A/T just dont laps more than 4000-4500 rpm.

    Is it something you can tell me ?

    Kind Regards

  • Anonymous Apr 01, 2014

    replaces coil and wires still no spark at coil

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

HI......
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.

OK... I hope this solve your question .

THank you for use fixya.

Posted on Jul 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I arrange my spark plug wires on my Hyundai Getz go 2002


How to change spark plugs hyundai accent 01 - 05 - YouTube

? 3:18
https://www.youtube.com/watch?v=tU2vwisJ7v4
Feb 16, 2012 - Uploaded by PNBNC
I filmed this right after changing my old plugs, I figured it was easy enough to film and some people can profit from it. for a ... Coil, you mean wire lol ... When you go to put the spark plug back in, never start it with the ratchet.

How To Replace Change Install Spark Plugs 2001-06 ...

? 3:17
https://www.youtube.com/watch?v=yVV2KcPDFIo
May 14, 2013 - Uploaded by 1A Auto Parts
... spark plugs. This video is applicable to the 2001, 2002, 2... ...spark plugs. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra 2.0L. ... +queentonks A little know-how can go a long way. We're glad ... When do you think is good to replace my spark plugs wires? My spark ...
2001 Hyundai Accent Firing Order: Engine Mechanical ...www.2carpros.com/.../hyundai-accent-2001-hyundai-accent-firing-orderApr 23, 2009 - Engine Mechanical problem 2001 Hyundai Accent 4 cyl Two Wheel Drive Manual 95000 ... Now I'm trying to figure out how they go back on. How do I find out the Engine Firing Order for my car - Hyundai Accent 2001 1.5L?Which is cylinder 1 - 1.6 Accent - Hyundai Forum: Hyundai ...www.hyundaiperformance.com/.../16837-cylinder-1-1-6-accent.htmlJan 13, 2003 - 3 posts - ‎3 authorsFrom what I read though, the coil pack is configured as 1 4 2 3. I'm assuming the first wire on the coil pack goes to cylinder 1. Can anyone ...

Dec 16, 2015 | Hyundai Cars & Trucks

1 Answer

What would be wrong when my car has gas, but no spark?


2001 Sante Fe Won't Start, Cranks But No Spark. - Hyundai Forums ...

www.hyundai-forums.com/...santa-fe/112601-2001-sante-fe-won-t-start-...
Jul 23, 2010 - 10 posts - ‎3 authors I have a 2001 Hyundai Sante Fe that died on me while driving down my street. ... Thecar has many other unrelated problems and I am not sure I want to ... may be causing my two cylinder no spark and alleged fuel problem? 2006 Santa Fe 2.4 Engine swap-no spark
10 posts
Sep 24, 2012
No Start 2.4L Engine 2004 Manual
10 posts
Nov 26, 2011
Good Crank/Have Fuel pressure/NO IGNITION
10 posts
Oct 9, 2011
Car Cranks But Will Not Start
10 posts
Jan 16, 2008
More results from www.hyundai-forums.com

Engine cranks but won't start.What should I do. - YouTube

? 9:37
https://www.youtube.com/watch?v=jsQcLya1YLQ
Jan 24, 2014 - Uploaded by jimthecarguy
No Start Cranks Ok No Injection Pulse 2002 Hyundai Accent Easy Step By Step ... and car cut off, but would not restart. it sounds like it is starving for fuel. ... hi nice video man . i have no sparkno fuel .u think its the main? it was ...

Nov 26, 2015 | 2001 Hyundai Santa Fe

1 Answer

Hyundai 2.7 P303, P306 at the same time


I would say its the coil. A crank or cam sensor could cause one cylinder to miss, or go completely dead, but I doubt it would affect two cylinders. And you would get a code for either sensor.

May 01, 2013 | 2001 Hyundai Santa Fe

1 Answer

Cylinder 3 misfire on 2001 Hyundai Santa Fe


sometimes the fuel injector can be out of range but this would give a trouble code.
then check spark plug to see if it is wet or fouled.
check plug wire for external sparks.
last check the coil pack.

Mar 04, 2013 | 2001 Hyundai Santa Fe

1 Answer

Need to know cylinder numbering on 2.7 litre v-6. where is number 1 located number 2 located etc. thanks


For the 2002 Santa Fe 2.7L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
....(back)
1.....3.....5
2.....4.....6
....(front)

Ignition Connections:
(back)
o <---3
o <---6
o <---2
o <---5
o <---4
o <---1
(front)

Mar 23, 2010 | 2002 Hyundai Santa Fe

1 Answer

Changing spark plugs


You most likely have a big cover over the engine that is covering everything up. If you can get that off (sorry, I've never removed one) you should be able to see the plug wires/coil on plugs, whichever the vehicle has. 4 or either 6 depending on the number of cylinders. You may just see black rubber looking caps. Plugs are under them.

Mar 18, 2010 | 2001 Hyundai Santa Fe

2 Answers

2001 Hyundai Santa Fe Ignition coils & EGR Valve


Well I went ahead and took a go at changing the coils, plugs and wires yesterday. It literally took maybe 15 minutes and my hands didn't even get dirty. This is something that the auto place wanted to charge me 650 to do. I spent 200 on parts. I didn't realize the coils were the things sitting on top of the spark plugs. I think my 4 year old could've done it. All I had to do was unbolt the coils detach the wires and then replace. It was too simple.

Apr 17, 2009 | 2004 Hyundai Santa Fe

1 Answer

My hyundai santa fe


Hi! i think you must describe more problem symptoms;
DESCRIPTION The starting system includes the battery, starter motor, solenoid switch, ignition switch, inhibitor switch(A/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil. The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear. The contacts close and the starter motor cranks. In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns. http://hmaservice.com/viewer/dispimg.asp?path=/data/Passenger/HY/HMA/ENG/SHOP-images/HY-SM13-IMAGES-ENG/ebkd010a.gif INSPECT SPARK TEST 1. Remove the spark plug cable. 2. Using a spark plug socket, remove the spark plug. 3. Remove the ignition coil. 4. Install the spark plugs to each spark plug cable. 5. Ground the spark plugs. 6. Check is spark occurs while engine is being cranked. 7. Using a spark plug socket, install the spark plugs. 8. Install the spark plug cable and ignition coil.

May 24, 2008 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

734 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...