Question about 1995 Mercury Mystique
What is the torque setting on the nut?
SOURCE: changing front wheel bearing
first take the wheel off
Then take the caliper off the rotor
Then take the rotor off the CV joint spindle
You will need to remove the three bolts that hold the bearing in place.
You will either need to remove the two bolts that hold the strut or
you will need a Puller.
Posted on Apr 01, 2009
SOURCE: What are the torque specs
the torque are not mention out side any authorised workshop for that you need to visit the nearest authorised dealer or service centre & leave the rest of work to them without any hazard or trouble or either can start from a torque of 25 to 45 lbs. do not exeed the limit or other wise the nut or even the Axel can get broken in the prossess of facinating it so till then my friend have happy motoring & see you soon.!
Posted on May 08, 2009
At first, it looks like an impossible task, however if you start by removing the positive battery cable, then unplug mass air flow sensor, carefully remove air filter box and its components from the throttle body. from there you should be able to see the starter better and have more room to work and get it out. You can take the battery right out if you want a little more working space for your elbows. take the wires off the solenoid, sometimes the old studs of solenoid will break due to corrosion. remove the two 13mm bolts that hold the startersome models have one at the bottom also that you will need to access from the bottom side.
Posted on Nov 06, 2011
Tips for a great answer:
Sep 28, 2015 | Cars & Trucks
Apr 05, 2013 | 1995 Mercury Mystique
Jan 12, 2013 | 2002 Toyota Highlander
Oct 14, 2012 | Cars & Trucks
Aug 18, 2011 | Mercury Mystique Cars & Trucks
Aug 26, 2010 | 1999 Mercury Mystique
Jun 01, 2010 | 1995 Ford Taurus
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: