Question about Chevrolet Beretta

1 Answer

What is the name of the brake light on the rear spoiler

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 321 Answers

Third brake light.Or center brake light.

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Camaro Z-28 : ABS Lite and Brake Lite both on...Whats wrong?


this may sound crazy but change the bulbs in the light that is up by spoiler and im sure the lights in dash will go off. the dash light and the rear spoiler light use the same ground. let me no if it worked or not.

Dec 28, 2011 | 1994 Chevrolet Camaro

2 Answers

I have a 2002 Porsche 911 C2. Where in the fuse panel is the fuse for the rear spoiler?


hello there
The fuse for rear spoiler is at the fuse section "D"
fuse number 8... 15 amp

proporsche

Jan 28, 2011 | Porsche 911 Cars & Trucks

2 Answers

Third brake light not working all other tail lights & brake lights work fine


This is a simple bulb replacement.Simply pop off the access cover(if you need to) then twist the bulb in a counter-clockwise motion to remove it.Install is opposite of removal.I hope I could help, rate me accordingly, Thanks.

Oct 11, 2010 | 1993 Honda Accord

1 Answer

When car is turned on all rear barke lights and signals work but when car is off and brake is applied only the spoiler brake light comes on is that supposed to happen like that /


The rear spoiler and both rear lights should come on with the car off and brake applied, but no other lights should,The Only lights that should work on any vehicle when it's turned off is The headlights,brake lights,and hazzard light..

Oct 01, 2010 | Chevrolet Cobalt Cars & Trucks

1 Answer

How to replace 3rd brake light on 2004 Chrysler Pacifica?


the 3rd brake light is mounted to the spoiler. you need to remove the spoiler from the liftgate to acces the mounting bolts and the wire clip. there are five points of attachment of the spoiler,four hex nuts (metric) and one snap clip. two are accessable when the liftgate is open, they are in the corners of the liftgate. two more are under the upper rear window interior trim. the interior trim is held on by snap clips. if you pry outward on the trim starting on the right side of the window and work your way toward the middle you will be able to gain access to the two other nuts. once you have removed all four nuts, then close the liftgate and remove the spoiler by lifting up to disengage the last attachment point (snap clip). you will then need to change the light by removing the two nuts and disconnecting the wire clip. re-instal is the opposite of above. make sure that the wire for the third brake light does not get pinched when installed. (mine was improperly installed from the factory and the wire was pinched and this may have been why there was an early failure of the light)

Feb 18, 2010 | 2004 Chrysler Pacifica

1 Answer

Rear brake spoiler light works but brake lights don't


chek brake pedel fuse all see if theres a ground wire what goes on the nut to the car

Jun 23, 2009 | 1999 Chevrolet Cavalier

1 Answer

How do you replace the brake light on the rear spoiler on a 2001 Hyundai Accent?


This is the Spoiler Dude. The spoiler light is attached with screws to the spoiler. You must remove the screws and then the spoiler light will come away from the spoiler. Clip the two wires ( Black & Red ). Attached the new spoiler light ( I can get that for you) with a sleeve. Test the new light with the brake pedal depressed. Screw in the new light and that is it. If you have any questions.
Call Spoiler Dude Paul
719-661-8600
www.spoilerdudepaul@gmail.com

Apr 20, 2009 | 2001 Hyundai Accent

3 Answers

Can't get the spoiler, that holds the 3rd brake light on the off


regarding chevy equinox spoiler there are three 10mm bolts one on each end and one in the middle then there are three pins in the middle that snap in. these are very difficult to release without breaking them. If they break use a two part adhesive sparingly to hold the spoiler down or it will hit when you open the hatch.

Apr 05, 2009 | 2005 Chevrolet Equinox

1 Answer

Brake lights not lighting up


first thing take off decklid trim panel there shuold be atleast 4 bolts take the bolts out and pull upwward you will have to get some double sided tape anyway pull of spoiler and should be able to see the brake light twist the bulb out and replace it that is it/ Please rate my response thank you very much

Jan 30, 2009 | 2006 Dodge Magnum

1 Answer

Nissan Maxima 91 Rear Spoiler brake light broken


some of this cars have 1 fuse per side make sure to chek all the fuses some cars have more than one fuse box

May 29, 2008 | 1991 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...