Question about 1992 Chevrolet Beretta

1 Answer

95 chevy beretta trim outside seat belt on door is cracked how do i repair

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First take your trim off carefully and sand it down with about 80 grid sandpaper untill the whole thing is sanded. then take some primer to it wait for it to dry and the crack should have filled . put on about 3 coats of primer and then paint it back to the original color

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 envoy drivers door wont open from inside or outside


Linda, The door latch linkage is probably damaged or fallen off inside the door. Pop into a good body shop and have them check the door lock/latch mechanism for you. The body shop rates tend to be more reasonable then dealership for this type of repair. Links below are just to give you an idea of what may be involved in repair.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
GMC Envoy door panels remove and install front and rear
How To Install Replace Broken Power Door Lock Front Chevy Trailblazer GMC...
Chevy Truck Door Latch
How chevy door latch works



Jun 22, 2016 | 2005 GMC Envoy

1 Answer

How do i replace the park assist module in a 2011 chevy traverse???/


Have you checked the fuse? If so, the module is located behind the left rear trim panel. Remove the panel to access. Below is a diagram of the trim panel and location of the module in BLUE>
Preliminary Procedures
  1. Move the rear seat to the full forward position.
  2. Remove the rear number?2 seat . Refer to 3rd Row Seat Removal and Installation.
  3. Remove the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement.
  4. Disconnect the liftgate actuator rod from the liftgate. Refer to Liftgate Actuator Rod Replacement.
  5. Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to Rear Seat Number 2 Retractor Side Belt Replacement.
  6. Remove the liftgate door sill plate. Refer to Liftgate Door Sill Plate Replacement.



woauitf41mzpgaaaabjru5erkjggg==

Nov 16, 2014 | 2011 Chevrolet Traverse

2 Answers

How do i put a water pump in a 95 chevy beretta


http://www.youtube.com/watch?v=LAUuwBFM3KM

I put a new waterpump on my 95 Beretta. Actually, it isnt that hard. I followed this video on youtube & had no problems. Hope this helped. Just realized this post is like 2 years old. duhhh,,,,

Dec 08, 2010 | 1995 Chevrolet Beretta

1 Answer

94 chevy lumina apv door will not open most of the time


since it is the drivers front door it could be the outside door handle , the rod that goes from the handle to the lock asbly or the lock asbly its self take the door trim panel off and then loos inside the door and latch the door with the door open. open the door with the outside door handle and watch the rod and the lever that the rod is pushing down the lever might not be pushing the lever down far enough to release the lock. If the lock does not open try pushing down on the lever and see if the lock releases if it does ck the outside door handle for cracks along the hinges of the handle I have found that most of the time that it is the outside door handle cracked and the rod is not moving the lever far enough to release the lock.

Feb 20, 2010 | 1994 Chevrolet Lumina APV

1 Answer

1993 beretta serpentine belt diagram


well its hard to describe but here goes. the belt will run across the top from the PS pump to the alt. from the alt to the inside of the water pump, then to the outside of the a/c comp . then around the crank pulley, then up to the inside of the tensioner, then up around the outside of the PS pump. It will be easier to put the belt around all the pulleys except the alternator, release the tensioner and with the belt loose, slide it over the alt pulley. GOOD LUCK. I hope you fixed the problem with the belt, they just dont fall off for no reason. ck tensioner pulley, water pump.

Sep 18, 2009 | 1993 Chevrolet Beretta

2 Answers

Can't get belt off


just rotate the belt in a clock wise direction

Jul 15, 2009 | 1996 Chevrolet Beretta

2 Answers

95 Chevy Beretta 3.1 engine will not warm up


termperature sensor needs to be replaced

Feb 11, 2009 | 1991 Chevrolet Beretta

1 Answer

Seat belt 95 volvo 850


remove the door pillar trim and un bolt it.slide seat forewards and remove the door surround rubbers then take off the door pillar trim

Jan 01, 2009 | 1995 Volvo 850

Not finding what you are looking for?
1992 Chevrolet Beretta Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...