Question about 2006 Chevrolet Aveo

1 Answer

Left turn signal does not turn itself off

After the left turn is completed I have to manually click it off. When you make a real hard left turn (almost to the point of a u turn) It will click off by itself, but a normal left hand turn will not make it click off.
What could be the problem?

PS - The right turn signal works fine.

Posted by on

  • Anonymous Aug 04, 2008

    let me know what you find out coz mine does that too.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

The multifunction switch (turnsignal swtich) more than likely requires replacement. There are small tabs inside and if it is broken or not quite seated right it would cause this problem.

Posted on Aug 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 vue awd my lights and left blinker works


There is a short or something is broken in the multifunction switch (headlight/turn signal switch). It will most likely need to be replaced.

May 10, 2017 | 2003 Saturn VUE

1 Answer

My right turn signal flashes rapidly, and after turning it suppose to turn off itself but i have to turn off the signal manually. the left sometimes turn off itself.. how can i fix this? 98 buick century


when signal is rapid it useually means that a light is out. About your signal not turning it self off.
That is a defective indicator switch which useually means removal of steering wheel.

Apr 03, 2013 | 1998 Buick Century

1 Answer

Problem with turn signal when headlight is on


this sounds like a earthing problem , so check the wiring for the head lights, see if any wires are trapped between something, bare wire touching car body , anythingthat doesn't look correct, could also be the indicator lever itself with a problem , but check the headlight wiring first

Jun 03, 2017 | 2002 Chevrolet Express

1 Answer

Reset tire monitor on 2009 escalade


Hopefully you still have you manual. I will tell you how to reset the HHR, I found it in my manual. Turn the key to on, press lock and unlock at the same time on your key fob. The horn will beep twice telling you that you are in program mode. The left front turn signal light will come on, press the valve core letting air out of the left front tire. The horn will beep when left front is programmed. Then the right front turn signal will come on, let air out till horn beeps. Then right rear, same procedure then left rear same procedure. When that is done horn will beep twice again saying tire program is complete. Turn key off, make sure you air all tires back up.

Jan 03, 2012 | Cars & Trucks

1 Answer

My left rear turn signal is out on my 2006 Malibu. The bulb is good, but I replaced it anyway since I had the assembly apart. The left front flasher works fine as well. Before I try and replace any...


Stop lamp an hazard lights work ?
The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, the BCM receives a signal from the hazard switch. The BCM then will send an on-off voltage signal to all the turn signal lamps. All the turn signal lamps will flash including both IPC turn signal indicators.

Repair an open, high resistance, or short to ground in the inoperative turn signal supply voltage circuit. Refer to Circuit Testing and Wiring Repairs .
Did you complete the repair?

May 16, 2017 | 2006 Chevrolet Malibu

1 Answer

Left signal light doesn't turn off after I turn left


you need a new switch.there is a cam that drops down when you apply turn signal and it is stuck this is called a multifunction switch. should still be under warranty

Dec 08, 2008 | 2007 Chevrolet Cobalt Coupe

Not finding what you are looking for?
2006 Chevrolet Aveo Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74418 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7254 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...