Question about 1995 Oldsmobile Cutlass Ciera

1 Answer

Anti-lock light will not go out. - 1995 Oldsmobile Cutlass Ciera

Posted by on

  • tyle8313 Dec 19, 2008

    mine just started about 3 days ago and will not go off!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine did this this year too. First the antilock brake light came one. Then we started having problems with the car not recognizing the brake pedal was being pushed when trying to shift out of park. Our solution ended up being a stuck brake sensor. Under the dash and above the brake pedal was a small rectangular box with lots of wires. My husband unplugged all of it, cleaned out some gunk, and freed up the springs. Immediately after the anti-lock brake light went off and has not been back on.

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Anti-lock light is on and the low traction light turns on and off


you need to replace a anti lock sending unit or speed sensor

Jan 21, 2016 | 1995 Chevrolet Lumina

1 Answer

My 2007 Isuzu ascender has anti lock light on an vehicle does not want to start? What would it be?


his anti theft, light is on.?
and it don't crank, starting comes after cranking . not before.
lets do the steps. (operators guide lost sure)
1: KEY on, lamps all self test in cluster.
2: I see the antithief light stuck on this time. oops.
3: i turn key to crank, starter motor is silent.
4: means the the antitheft box does no like your key .
5: i use the 2nd spare key and it works , lost 2nd, OOOPS a daisy. now in a pickle.

Nov 03, 2015 | Isuzu Cars & Trucks

1 Answer

2001 Alero - anti-lock brake light warning light won't go out - had brakes replaced - is there a re-set button?


no reset button.have the car anti-lock brake system scanned.to check code.because when anti - lock brake light come on.it can be many things.like faulty wheel sensor.faulty relay or the anti - brake unit low on brake fluid or the abs unit faulty.

Nov 28, 2009 | 1999 Oldsmobile Alero

1 Answer

ABS light on at start and brake light flashing


replace the brake switch.i has seen in gm cars if brake switch is open not working.it will cause anti lock brakes stop working.see if anti lock brake module detect fault in brake switch circuit .anti lock brakes stop working.your brake light and abs light will come on.if this dont help.take it to dealership.

Jul 12, 2009 | 1999 Audi A8

1 Answer

Anti lock light won't go out


Find out why, repair it, and it will go off. You have a problem with the anti-lock brakes.

Jun 01, 2009 | 2001 Mitsubishi Diamante

1 Answer

What does the anti lock light on the dash mean?


The anti-lock light is indicating that your anti-lock brake system has a problem. Check fluid level. Could be a sensor, time for brake service etc, but I wouldn't wait too long to have it checked, just in case something serious. Anti-lock brake problems may cause a wheel or more, or all, to lock up in a panic stop situation. When was last service on brakes done?

Apr 25, 2009 | 1997 Chevrolet Lumina

2 Answers

Anti lock brake light


abs relay some times go bad

Dec 05, 2008 | 1999 Oldsmobile Alero

1 Answer

2003 Ranger FX-II ABS light on


This isn't hard to do at all really and should be easy to procure the part from the local parts store. There is only one little screw holding it in

102969669

  1. Raise and support vehicle.

  2. NOTE: Clean off dirt and foreign material that may have collected around the rear anti-lock brake sensor before removal. Remove the rear anti-lock brake sensor.
1 Disconnect the rear anti-lock brake sensor electrical connector. 2 Remove the bolt. 3 Remove the rear anti-lock brake sensor.
  1. NOTE: Thoroughly clean the mounting surface. NOTE: Inspect the anti-lock brake sensor O-ring for damage; lightly lubricate the O-ring with axle lubricant. To install, reverse the removal procedure

Nov 05, 2008 | 2003 Ford Ranger Regular Cab

1 Answer

Anti lock brake light on


It is most likely a bad front wheel speed sensor.Your sure abs rings were on back of rotors?It is going to be next to impossible to fix without getting the code with a scanner

Aug 25, 2008 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
1995 Oldsmobile Cutlass Ciera Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...