Question about 2002 Kia Sedona
For the passenger side low beam: Turn wheel all the way left remove one plastic screw and anchor from top of wheel well with phillips. Flex back inside wheel well panel. turn bulb cover counter-clockwise to remove. Unclip wire from top by pulling down (DO NOT REMOVE SCREW AT BOTTOM LIKE I DID). remove bulb and replace put back together in reverse
Posted on Oct 30, 2008
Left front low or high beam headlight: remove battery, remove weather cap, pop-off 2-prong connector, depress spring holding bulb in position, use inspection mirror if necessary, one end of spring is caught beneath a lip, Move spring past lip and lift up, it will rotate upward and is fastened on opposite side. Remove old bulb, install new 55 watt halogen bulb (H7-55) available at Walmart. Install new bulb with tang in slot at bottom, fold over spring and depress to hook end under latch point, install 2-prong electrical connector, install weather cap, turn about 1/8 turn to lock into position. Reinstall battery, clean terminals and cable ends, place new no-corrode rings (available from Walmart) around battery posts, install cable ends, and tighten.
Right front headlights: not necessary to remove battery, otherwise same essential procedure.
Note: Lower and upper beams all use same H7-55 bulb.
Posted on Jul 31, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the headlight assembly. Just remove the 3 bolts with a 10 mm socket and pull it out so you can disconect the wire harness. After that pull the whole assembly out and unscrew the bulb cover. The bulb is held in with a spring clip.
Posted on Dec 31, 2008
The recommended interval for changing the timing belt is in the owner's manual. Generally, this is every 60,000 miles.
P.S. I found the data on the internet and, it is indeed 60,000 miles.
Posted on Aug 24, 2009
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote, u will need t have the dealer do this procedure..
Posted on Sep 28, 2009
Tips for a great answer:
Dec 02, 2015 | Cars & Trucks
Dec 24, 2010 | 2006 Kia Sedona
Aug 15, 2010 | 2006 Kia Sedona
Mar 29, 2010 | 2007 Kia Sedona LX Minivan
Mar 24, 2010 | 2005 Kia Sedona
Feb 15, 2010 | 2006 Kia Sedona
Feb 03, 2010 | 2006 Kia Sedona
Dec 20, 2009 | 2006 Kia Sedona
571 people viewed this question
Usually answered in minutes!