Question about 1994 Chevrolet S-10 Blazer

1 Answer

Spark plug wires to distributer diagram - 1994 Chevrolet S-10 Blazer

Posted by on

  • lmcintyre Aug 02, 2008

    We have changed all the spark plugs but one of the wires pops off without warning. It is on tight but still manages to come off. What to do?

×

1 Answer

What is the order of the spark plugs wires on a 1994 s-10 4-3

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram or picture of where the spark plug wires go into the distributer on a engine number 318-1


For this you have to determine when the #1 cylinder is at TDC (Top Dead Center) - when it would be firing. Take the distributor cap off and look at the rotor - it would be pointing at the #1 spark plug wire on the distributor. The wires would be connected it order around the distributor cap starting at 1. The sequence is 1-8-4-3-6-5-7-2 in a clockwise fashion.

Jul 13, 2014 | 1983 Dodge Pickup

1 Answer

What is d16a1 spark plug wires diagram?


you never gave year so follow this link and look for your particular year/model
Firing order on the distributer for 90 or 91 acura integra

Apr 26, 2014 | Acura Integra Cars & Trucks

1 Answer

1998 gmc Sierra firing system


701d6c31-22de-486c-b704-98411f6a9f82.jpgdba42bb6-2f2d-4771-b4a1-0c9698991bb2.jpg5be8e0a6-186d-40d0-b2df-ec5869770d9e.jpgI am not real sure of the question. Module, distributer and starter ? The starting circuit doesn't really connect to the distributer and as far as a module goes, it's not really connected to the distributer and has 4 wires going to it not 3. You said 3 wires and distributer in your question so I'm gonna try and help you and hope I am understanding what you are trying to ask. You didn't mention your engine size and the picture looks small but it really doesn't matter if you happen to have the 4.3 liter engine. The wiring is pretty much the same. The wire colors may be the same V-6 or V-8 Engine. Now the distributer does have 3 wires coming from the distributer (pink, pink with a black stripe and a brown with a white stripe). Those are for the cam shaft position sensor which is mounted on the distributer. I am guessing the engine won't start but does turn over and your not getting any spark at the spark plugs (kinda going by your question you wrote. If this is what is happening then yes the ignition control "Module" correct however that is mounted on the right (passenger) side of the engine basically on top of the valve cover. Like I said it has 4 wires going to it and if this is faulty you will not get any spark. In the picture with the engine, where I put the red arrow at is the general location of the module. The other 2 pictures are the wiring diagrams for the entire starting circuit and the wiring for the cam shaft position sensor. If I'm way off of what your question is you can reply here with more details in your question or feel free to email you directly at csautomotivecars@att.net Hope I was able to help a little bit anyway.

May 24, 2013 | Cars & Trucks

1 Answer

Engine won't start


the spark plug wires can be confusing but a 4 cylinder is not that hard from the front of the engine being where the pulleys & belts are its 1,2,3,4 on the coil or distributor it can be in counter or clockwise rotation 1&3,2&4 or 1&4,2&3 likely its 1&3,2&4 hope you find this helpful

Mar 03, 2013 | Cars & Trucks

1 Answer

How do I install a distributer on 1998 vortec engine. old distributer missing


Hi: To Install the Distributor Correctly, 1st thing to do is Remove your #1 Spark Plug assuming it will turn over have someone Turn the Key Off and On in Short Intervals.Either put a Compression Gauge in the #1 Spark Plug HoleOr the Old Fashion Way Works as well just put your Finger in the #1 Plug Hole.As your Helper Cranks the Engine On -Off On -Off.Not A Continuous Crank.When You Feel Air Pressure or See gauge Come up.TYhats when your Engine is a The compression Stroke.Now you Can Drop the New Distributor in its Hole.NOTE: You'll need a Spark Plug and Timing Diagram to See the Position your Distributor ROTOR Line it up to where the Diagram Shows your #1 Spark Plug Wire Will go in the Distributor Cap.If the Distributor Rotor is Not n That Position Your goning to Get Either Back Firing engine May Not Even Stsrt, To This Is Crucial. After The Know that you have The Distributor Droppped The Right position you'll need to Put Gap your Plugs at the Correct Specs, With All Plugs in Now You'll need to Put New Plug Wires on .And They MUST be in the correct order.Sitting inside your Vehicle #1 Plug is the Front Plug on the Drivers Side Next is #3 plug Next is #5 and Your Back Plug is Number 7,On the other side Passenger Front Plug is #2 next #4 Next is #6 and the Back is #8 Assuming you know have your Distributor Dropped in The Proper Position, Put the #1 Spark Plug Wire on the Front Spark Plug (Drivers Side) The Spark Plug Firing Order in Your Engine is 1-8-4-3-6-5-7-2 Clockwise So the Next hole after you have #1 Plug and Wire on And Distributor In Correct Position on COMPRESSION STOKE, Going Clockwise you next wire will be your #8 Position in The Cap And it wil go to the Back Spark Plug on The Rear Spark Plug on Passenger Side. NOTE: Drivers Side Spark Plugs on the Drivers Side Front to Back are Your Odd Numbers 1-3-5-7 Pasenger Side is Your Even Numbers From The Front is #2-4-6-8 Is The Rear PLug .

Heres a Diagram of your Spark plug Positions

Front of Engine
1 2
3 4
5 6
7 8

Hope This Will Get You Going. Let me know The Quality of Help and Solution I've Given You By Voting on It.And May Can Also Send a Testamony
From d_hubbs

Jun 03, 2010 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

2000dodge durango spark plg.distributor wiring diagram


there is no distributer. the moduals are on top of the plug wire to each plug with a connector to the main engine harness to the ecm.

Sep 11, 2009 | 2000 Dodge Durango

1 Answer

Placement for spark plug wires for 1995 chevy blazer 4wd


i didnt fix it on my own couldnt get the diagram from you your site only gave me a ad for hp printers
i had to take it to a garage to take care of it i dont know if i hit the wrong link let me know

Jun 18, 2009 | 1995 Chevrolet Blazer

1 Answer

Need a diagram of the distributer wire and spark plug information


try you local library and there you can get pictures and diagrams for your car.

Mar 16, 2009 | 1990 Jeep Wagoneer Limited

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...