Question about 2003 Dodge Dakota Club Cab

1 Answer

Having trobule with break and abs light coming on and cruise stoped working at the same time

Posted by on

  • thejoe1 Nov 26, 2008

    ditto. Exact same issue. 2500 2wd. Brakes are fine. Fluid is fine. Fuses all look good. What is the problem

  • Fred Bodeit Dec 05, 2008

    2002 Dakota , was using cruise on 401, touch brakes, abs light came on also .... last time i had cruise working as well. i have pulled all fuses, no luck, changed electric switch at brake pedal .. no luck, checked rear end some models have only ABS on rear (such as mine) . Sure would like to either get cruise back or at least get rid of the darm abs light ...

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 133 Answers

Did you check the rear wheel speed sensor. mounts on top of rear differential. they tend to go out pretty frequently

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

How come my cruise control won't even light up, much less work? 2004 trailblazer


has a fuse and an actuator motor or
the set resume switch could be faulty

May 31, 2016 | 2004 Chevrolet TrailBlazer

2 Answers

I have a 2006 Hyundai sonata... and I have changed


use a scanner to reset the ecm program as removing the battery sometimes corrupts the CPU settings

Oct 19, 2014 | 2006 Hyundai Sonata

1 Answer

My 2009 dodge caliber runs fine and stops fine but the abs dash light came on and the cruise stoped working suddenly. What might be the cause of this and the cure. the auto parts place put a scanner


You would need to have someone scan the body computer to check for codes. Most code readers will not access body computers.
The cruise would stop working if the ABS light came on for safety reasons.

Sep 26, 2012 | 2009 Dodge Caliber 2.0

1 Answer

2006 Jeep Liberty Diesel, Cruise doesn't work. Cruise, ESP and ABS dash lights on


You must have the systems scanned for fault codes before any reason can for the problem can be given.

Jul 16, 2012 | Cars & Trucks

1 Answer

Break lights on


Check the abs module for trouble codes. You will need a high end scan tool or a specific abs code reader to do it. The brake light is on likely because the abs light is on. The airbag light might be a different story. Does the horn and cruise work?

Jan 23, 2012 | 1999 Dodge Caravan

2 Answers

My ABS light came on in my 99 honda accord what does it mean?


Normally when your abs light comes on, that is referring to your breaks. This could be low break fluid, leak in break hose somewhere, or need breaks checked. Most cars now a days, have a sensor that is part of and hooked up to your breaks, and that will trigger your abs system (which is breaks) and let you know if your pads are low, or to the ware mark. So Here is what you first do, is check your break fluid and make sure that resavor is full, check under car to make sure there is no leaks, under car and inside each wheel area where breaks are, and then next step, is Les Swab can check your breaks for free and let you know if your pads are down to the ware mark. Let me know, Mike

Sep 14, 2011 | Honda Accord Cars & Trucks

1 Answer

ABS light in panel came on and cruise control stoped working at same time


2009 avenger, ABS and brake lights stay on, cleard codes still came back, had dealer clear codes, still came back. dealer says its a speed sensor,i replace all 4, then he tells me its the brakes i have new breaks put on, now he is telling me its a fuse, i checked all fues's, nope not it AGAIN, now he says its the ABS sending unit or the ABS modutaltor and he said if you replace one better replace both, now they want A NOTHER 1300.00. can ANYONE HELP ME

Jul 22, 2011 | 2009 Dodge Avenger

3 Answers

Cruise does'nt work all the time have to pull back


the brake switch is what is used to disengage the cruise, so I would check to see if the brake pedal is slightly contacting the switch to keep the cruise disengaged..it is located just on the back side of the brake pedal arm up under the dash...it may be out of adjustment or maybe just plain defective

Dec 16, 2010 | 2008 Chevrolet Silverado 1500

1 Answer

Abs light problems


I HAVE SEEN A BAD BRAKE LIGHT SWITCH CAUSE THE ABS AND BRAKE LIGHTS TO COME ON.BUT TAKE IT TO A DEALERSHIP.BECAUSE YOU COULD BE HAVING BRAKE FAILURE THE.ABS BRAKES MAY NOT BE WORKING.LET THE GARAGE OR DEALERSHIP SCAN IT. AND FIX.

Sep 13, 2009 | 2005 Chevrolet Silverado

2 Answers

ABS LIGHT AND BRAKE LIGHT STAY ILLUMINATED


As far as the cruise control look under the battery, drivers side one if a diesel and there is a vacume line for the cruise. This vacume line always breaks right under the battery causing the cruise not to work.. Ive owned 2 2nd gen dodges with non working cruises and this was the problem on both.

Apr 28, 2009 | Dodge Ram 1500 Cars & Trucks

Not finding what you are looking for?
2003 Dodge Dakota Club Cab Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...