Question about 1987 Toyota Corolla 2 Door

1 Answer

Brake lights not working when pressing brake...put in new fuses and it worked for awhile and now not working again.

Posted by on

  • Anonymous Aug 08, 2008

    The left brake light is not working but the right one does. I checked the fuses.

  • Anonymous Oct 04, 2008

    I have an '89 Celica that has brake light problems. Last time it was the grounds at the bulb sockets. This time, I don't know. The switch appears to be working, but still on current flowing to the bulbs.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Have a look at the swich on the brake peddle that will almost always be the problem

Posted on Aug 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse panels located? Brake lights are not working


Check the brake light switch atop the brake pedal arm . probably not the fuse . Go to http://www.bbbind.com/free_tsb.html free wiring diagrams . Enter your vehicle info . year ,make , model ,engine size . Then under system click on lighting , then under subsystem click stop lamps . Check wire color into switch an check for B+ voltage . Then press the brake pedal an check for B+ voltage on the out put wire . No voltage coming out with voltage going in .the switch is bad .

Apr 03, 2016 | Cars & Trucks

2 Answers

Why don't i have any tail lights on my truck? no fuse in the fusebox for tail lights can anybody help me please?


Have you checked that your break light switch has not gone bad? It's located at the base the of steering column, just behind the brake pedal.

Also, check the brake light circuit. Start at the fuse box under the hood and make sure the brake lights fuse is not blown, the terminals are free of corrosion and that the connections are tight. Then check the brake light switch on the bake pedal arm.

Aug 21, 2014 | 1999 Chevrolet Silverado 1500

1 Answer

Brake lights don't work?


check the bulbs and fuses and brake light switch

Jun 06, 2013 | 1999 Jeep Wrangler

1 Answer

Have a 1999 Chev. Suburban. Problem is with brake lights. Top panel (on roof) works but neither side panel works. Replaced circut boards in tail lights, new bulbs, and all fuses are good. What next?


WITH A GOOD FUSE TESTER, TEST ALL THE FUSES FUSEBOX UNDER THE HOOD & INSIDE THE VEHICLE. IF THE FUSES ARE ALL GOOD WITH THE TESTER YOU MUST HAVE A BAD BRAKE LIGHT SWITCH OR A BAD TURN SIGNAL SWITCH. THE BRAKE LIGHT CIRCUIT GOES UP THROUGH THE TURN SIGNAL SWITCH & THEN TO THE BRAKE LIGHTS. FIRST OF ALL IS THE BRAKE LIGHT SWITCH GOOD ? THE ORANGE WIRE FEEDS THE BRAKE LIGHT SWITCH, THE WHITE WIRE PUTS POWER TO THE TURN SIGNAL SWITCH, SO THE LIGHTS CAN BE USED AS TURN LIGHTS OR BRAKE LIGHTS. , PUT A TESTER IN THE WHITE WIRE & PRESS ON THE BRAKE PEDAL. IF THE TEST LIGHT LIGHTS UP, BRAKE LIGHT SWITCH IS GOOD, BY THE WAY THE BRAKE LIGHT FUSE MAY BE LABELED" STOP", THE FUSE LABELED" BRAKE" IS FOR THE ABS SYSTEM. TO CHECK THE TURN SIGNAL SWITCH FOR BRAKE LIGHTS, REMOVE THE PLASTIC COVER FROM UNDER THE STEERING WHEEL, PRESS ON THE BRAKE PEDAL, PUT THE TESTER IN THE SMALL YELLOW WIRE, THEN THE SMALL GREEN WIRE. IF THERE IS NO POWER IN EITHER WIRE, THE TURN SIGNAL SWITCH IS BAD.

Jan 11, 2011 | 1999 Chevrolet Suburban

1 Answer

Chevy trailer brake problem


Check under hood fuse box make sure L. trailer light fuse isnt blown.

Aug 05, 2009 | 2005 Chevrolet Silverado

1 Answer

Brake lights/ Turning signals not working on a 2004 cavalier


change brake light switch . check brake switch wiring . for shorting then check tail light bulbs sockets. if you cant find it. you probably going have to buy a short finder.

Mar 25, 2009 | 2001 Chevrolet Cavalier

3 Answers

Brake lights stay on when car turn off


brake light switch stuck or bad

Feb 03, 2009 | 1999 Nissan Maxima

3 Answers

Tail lights and brake lights not working - not fuse - what can it be?


Brake light switch, located on upper brake pedal should be checked, that is most likely your brake light issue, but U say tail lights aren't working, but running lights do, tail lights and running lights I would consider to be the same, so can u clarify that for me? Let me know how the u do w/ brake light switch, and if u have issue w/ tail lights?

Nov 01, 2008 | 1994 Ford Thunderbird

1 Answer

Brake lights on GTI


Check to see if the brake light switch is working first by putting a jumper on the switch that is located just above the brake pedal arm.
This switch is pushed when you press the brake pedal, and turns on the brake lights just like turning on a light switch.
I may be out of adjustment too.
Otherwise, you may have all the brake light bulbs burned out.
I would try a new bulb in one brake light first.

Jun 14, 2008 | 2000 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...