Question about 2008 Honda Pilot
2008 honda pilot how do I rest the service light on the dash
Posted on Oct 27, 2008
SOURCE: Maintenance Required light
The light needs to be reset. Usually after an oil change they will reset it for you. Directions for doing yourself>>> turn off the engine, press and hold the select/reset button in the instrument panel then turn the ignition switch on. Hold the button until the indicator resets (approximately ten seconds). Directions from your Honda manual. Hope this helps!
Posted on Jun 04, 2008
SOURCE: maitneance required light
Hi.. after you do this step come back and rate as fixya. OK..
Turn the ignitio key to run position
Push and hold for 5 seconds the Trip reset botom.
With the botom pushed turn the ignition key to OFF position.
Keeping pushed the botom.
Turn the Ignition switch to RUN position. keep pushed the trip botom for 10 seconds or untill you see the MAINT_Requi. go OFF.
Remember all this steps with the trip botom pushed. OK.
I hope this solve your question. Thank you for use fixya.
Posted on Aug 01, 2008
No its easy . here are the steps turn ignition to acc/ first turn hold reset button located next to odometer rest button. Hold this button for 30 seconds. then turn ignition to next turn/click where lights come on on the dash ex brake air bag etc. hold for another 30 seconds. The maintenance light should flash and go out start vehicle and your maintenance is done. Good luck ad thanks for using FIX YA
Posted on Mar 13, 2009
Tips for a great answer:
Sep 29, 2014 | 2007 Toyota Prius
Mar 07, 2011 | 2007 Toyota Camry
Nov 19, 2010 | 2008 Toyota Camry
Oct 08, 2010 | 2005 Toyota Corolla
Aug 26, 2010 | 2005 Toyota Corolla
Jun 22, 2010 | 2006 Toyota Highlander
May 16, 2010 | 2002 Honda Accord
May 15, 2010 | 2002 Honda Accord
Jul 12, 2009 | 2005 Toyota Corolla
582 people viewed this question
Usually answered in minutes!