Question about Chrysler 300

1 Answer

Lifter collapsed need engine diagram - 300 Chrysler Cars & Trucks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Lifters on drivers side tapen

Posted on Aug 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 97 chevy that the lifters have been ticking for some time now can this damage my engine


Not necessarily but eventually failing lifters can collapse and prevent the respective valves from opening properly. When this happens that particular cylinder will stop firing. Collapsed lifters can also eventually cause damage to the camshaft.

Nov 21, 2014 | Cars & Trucks

1 Answer

Ticking noise in motor at first start up


what engine the V6
did you read the TSBs on chain noise of lifter noise.
how many miles on engine? 100k, 500K?
not changing oil frequently dooms most HLA lifters. they gum up and click (collapse)
same with chain
same with the tensioner,
a good tech, can find which part ticks with a $5 stethoscope.

Mar 18, 2014 | 2007 Suzuki XL-7

1 Answer

I have a 2003 gmc Sierra half ton 4.8 liter that has a knock that sounds like lifters


There is,If you do the lifter you could be after something else,The noise sounds like a collapsed lifter,A collapse lifter can cause a misfire,The 2003 GMC sierra or I should say the 4.8 engines suffer from a cut O-ring between the oil pump screen and the oil pump causing oil areation,resulting in lifter noise,The noise will be present a cold start and then diminish at warm up.12_3_2012_8_08_44_am.gif

Dec 03, 2012 | 2003 GMC Sierra

1 Answer

Whats the ticking sound all of a sudden?


It sounds like a collapsed hydraulic valve lifter- a part of yoiur valve train in the upper engine. You need to have it checked at a shop you trust I don't know of any oil additives that can cure this, although someone here may give you some advice.
Loose valve train noise is common on high-mileage engines, but if it is a collapsed lifter, I think you should have it checked.
A loose timing chain will make a rhythmic slapping sound, but the ticking you describe sounds more like it's in your valve train. Have someone check it.

Nov 02, 2011 | 1995 Buick Regal

2 Answers

Lifter tapping


The tappet noise usually will get louder and louder as it wears. A totally collapsed lifter will definitely be noticeable by loss of power to that cylinder, misfiring, and excessive noise. But then again your current lifter noise could be possibly maintained for years to come by regular and consistent oil changes.

Nov 03, 2009 | 1991 Ford Explorer

2 Answers

I just replaced all of my hydraulic lifters and no compression!


Yes, you've overtightened the lifters causing the valves to not close completely. If you did not prime the new lifters before you installed them and tightened them with the engine off they are most likely collapsed. back off all of the rockers to just snug and make sure the engine is running when you readjust them. Usually you need to let new lifters sit in a can of oil for a while to fill up. I've used a syringe to fill lifters prior to installation. Did you replace the push-rods also? If so were they the same length as the originals?

Sep 20, 2009 | 1992 Chevrolet Sportvan

1 Answer

Making a tapping sound in the engine part


In most cases it is not the camshaft that causes engine tapping noise, but you should look to your valve lifters...one or more could be collapsed. My hat goes off to you and your husband though, for taking this on together! Here is a basic diagram that I hope helps you guys out: http://www.autozone.com/autozone/catalog/parts/jobDiagram.jsp?engineCyl=4&ymmeId=1995/42/33/10&imageURL=&categoryDisplayName=Internal+Engine&productType=00&parentId=56

Jul 30, 2009 | 1995 Pontiac Sunfire

2 Answers

Engine Tapping


Could be a lifter.. The lifters are what opens & closes the valves.. Oil passes through a tube in each lifter.. If the tube is clogged the oil wont get through and cause the tapping noise..

Jul 08, 2009 | 1997 Volkswagen Golf

2 Answers

I have a ticking sound under hood of 88 ford ranger, all fluids check good, was wondering what it might be and suggestions to fix?


collapsed lifter making valve tappet tick most likely(buy seafoam from walmart may temporaly fix)! :)

Jul 03, 2009 | 1988 Ford Ranger

1 Answer

Collapsed lifter


if it is higher mileage i would replace all of them since you are already tore down to replace one. it is not a common problem.You could replace the one and never have another problem just never know.

Jan 29, 2009 | 2006 Chevrolet Trailblazer Ext

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

765 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...