Question about 1995 Chevrolet Lumina

1 Answer

Blinkers suddenly went out on the Van

I recently replaced the flasher on the Van as of about 4-5 monthes ago. I noticed the blinkers going quicker on both LH and RH turns a couple days ago and now both blinkers are completly dead. I find it hard to believe that a flasher I just replaced has gone on the fritz and I took it in for an oil change and those guys checked it and found that the flasher was good but don't know if they are right or wrong. They think there is a short somewhere in the wiring harness. Is this a common problem? I did splice the ignition power cable in the rear of the Radio Harness to tap power for a device to plug in my I-pod but these systems aren't related.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Well, it could be a short, but it is more likely to be that the relay went again, or that the fuse went. try those first. and depending on the quality of the relay, it may go more often than every 4-5 months. if there is a short, when you replace the fuse it will immediately blow again. also, you might try replacing the bulbs.

Posted on Jul 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Occasionally, blinkers go crazy - erratic flashing - when I crank up? Faulty relay?


possible faulty flasher or relay, check all signal light bulbs and wires for damaged or burnt sockets, do you have trailer hitch wiring, if you do look for damaged wires etc., It sounds like a grounding issue.

Jan 23, 2016 | 1993 Toyota Land Cruiser

1 Answer

1995 Ford E350 Van blinkers and flashers not working


replace your flasher and all will work fine

Feb 25, 2013 | Cars & Trucks

1 Answer

When I turn on the blinkers , , I hear a buzz sound , and then the insturment panel lights up ?


I just had a buzzing sound happening on my 2000 Monte Carlo. It was coming from the Hazard button which is actually combination blinker\hazard switch in one. Turns out the ignition switch was going bad. The ignition switch finally went totally bad (no start some times). Changed it a couple of months ago. No issues with blinkers again.

Sep 05, 2012 | 2000 Chevrolet Monte Carlo

1 Answer

Dash Display and Blinkers going out/ HZD Fuse burrning out


sounds like a short somewhere. you need to get a diagram on the wiring system and start from there. good luck...... could also be in fuse box because one fuse dosent run all those things. usually instrument panal lights have own fuse as do brake lights and hazard lights and gauges

Aug 12, 2012 | 2006 Chrysler Town & Country

1 Answer

I have a Pontiac Sunfire 2003, and the blinkers sometimes do not work even though I have activated them. The only way to get the blinkers working again is to turn on the emergency flashers, and then they...


the flasher and the blinkers are serpent elements of the bulb and also have serpent flashers if none of your blinkers flash when manually doing it chock flasher it is round and usually by the fuss box some times on top there is also one 4 the hazard lights be sure key is on

Dec 29, 2009 | Pontiac Sunfire Cars & Trucks

3 Answers

1999 Chev 2500HD - Blinkers only blink when brake applied


the cause of this is the turn signal switch, there are numerous posts about this problem.

Jul 05, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

95 pontiac grand prix. blinkers not working. checkd EVERYTHING.


go to a junk yard and get a multi-function switch(the one on the steering column)

Mar 23, 2009 | 1998 Pontiac Grand Prix

3 Answers

Blinkers stopped working


Your F--150 has 2 flashers, emergency and turn signal. Both are mounted on the fuse block under the dash. The turn signal flasher is mounted on the front of the fuse panel, the emergency flasher is mounted on the rear of the fuse panel. so replace the turn signal flasher should solve the problem. Let me know how it goes.

Oct 20, 2008 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
1995 Chevrolet Lumina Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63572 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...