Question about 1989 Honda Accord 4 Door

1 Answer

Low beams My low beams are not working, I checked all fuses and they are good, replaced headlights, still no low beams. The retractable lights don't even open when I turn on the lights, they only open if I switch to High. But when i switch on low beams, dash lights do go on. All other components in wiring diagram work except low beams.

Posted by on

  • 1 more comment 
  • dude1979 Jul 23, 2008

    oh yeah, It's a 1989 honda accord exi



  • dude1979 Jul 24, 2008

    dont know how to erase post. i fixed my problem. cheers.

  • Anonymous Aug 24, 2008

    I have only the left low beam, no low beam on the right side. replaced light but still no low beam on right side.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 178 Answers

Hello i no you said you checked your fuse box go under your hood drivers side near your strut tower their problay is a second fuse box its black some times fuses is on the cover you have to unlock the side of cover lift off on inside of cover will list what is what sometimes left and right headlamps are seperate fuses goodluck

Posted on Sep 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers side low beam headlight went out, replaced the bulb but only works on high beam, any suggestions


using a test light check for powers and ground at the headlight socket. you say the high beam works so that pretty much says the ground is good. if the low beam terminal has no power you will have to see if your car has a fuse for each headlight, as you don`t say the year make and model you have. if you have power then check the socket for corrosion or a loose connection.

Apr 19, 2015 | Cars & Trucks

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

2 Answers

Replaced battery in crv and now headlights don't work


Check the low beam fuse in the fuse box, usually a 20A. If the fuse is blown/shorted during the replacement of the battery, your lights won't work. Replace the fuse if that's your case. Hope this helps.

More help: Moonlight Driving
replaced-battery-in-crv-now-headlights-zp00lepaloflvda1hbduq5xd-4-9.jpg

Dec 29, 2012 | 2006 Honda CR-V

2 Answers

2003 GMC Envoy low beam head lights will not come on. The bulbs are not blown, fuse's ok, no power coming to the head light connector. minimal power to the fuse compartment with fuse removed. 9 to 10...


The problem is a Headlight module. Fuse box under the hood has two black modules side by side, the one on your right is the headlight module the one on the left is the fan module. Try swapping them, if the headlights work replace bad module, don't drive vehicle with the bad module in the fan slot. Mine kept going bad because I had a high intensity bulb on one side.

Oct 02, 2011 | 2003 GMC Envoy

1 Answer

High beams work low beams do not


you don`t say if you have checked the fuses for the headlights.if the fuses are okay and you know that the low beam filaments are working.you may have to feed power and ground directly to the proper headlight prongs from the battery to make sure the bulbs are good.then it could be a relay for the low beams or a switch for the headlights.you don`t say if you have daytime running lights on this car as there is a module for this system that may be the problem for the now low beams.

Mar 28, 2011 | 2006 Chrysler PT Cruiser

3 Answers

Low beam head lights not working - The low beams, both stopped working. The high beams work fine. I checked the fuses and all 4 are good. I even swapped the low and high beam fises just in case. No...


if the fuses are good then you need to check for power and ground at the headlight plug that attaches to the headlight bulb if you have a good power and ground there and the connections are good then the bulbs are both no good.or if you can tell the bulbs are burnt out by looking at them then you don`t have to check powers and grounds.you also can directly feed power and ground to the bulb and check both the terminals for high beam and low beam as you cannot tell which is which by looking at the terminals

Mar 04, 2011 | 2001 Ford Focus

1 Answer

I only have high beam headlights. I have replaced the light bulbs and checked the fuses. All the other lights work.


about troubleshooting your headlights on your vehicle. I would isolate the wire that comes from the headlight switch to the headlamp bulbs for low beam and check to see if there is a short in the wire. You can find this wire by using a test light turn on the key and get a good ground with the test light poke the wire and see if the test light illuminates with the headlight switch on. ---- Also check the wires, and check the fuse for your low beams. could of blown a fuse on your lows, but your highs will still work.
Every single time I have had a failure of low beam in a headlight without failure of high beam, it has been because the lamp bulb or halogen lamp module has reached the end of its serviceable life, not because of any wiring problems. Low beam burns out first because it is on the most. If low beam is lost simultaneously in both headlights, I would check fuse first, then the headlight switch. If low beam is lost on one side only, it is almost always going to be due to the bulb or lamp module needing to be replaced. In that case, replace them in both headlights because the other one will be going kaput in short order, as well.
There is something to check. Does the low beam relay click when you turnt he low beams on?
if it does not click then
Then find the BCM at the base of the steering column. In there find the grey connector and in there, find the pink/white wire in terminal A4. Use a wire to jump that wire to ground. IF the low beams come on, then it is likely the BCM is bad.
Also check a bad wire between the fuse block and the BCM. before replacing the BCM . Start under the fuse block. This is the fuse block under the hood.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Mar 18, 2010 | 2004 Chevrolet Cavalier

1 Answer

Low beam dosent work. bulb is good highbeam works cant find fuse for lights. its not underhood


Hi,
It has been because the lamp bulb or halogen lamp module has reached the end of its serviceable life, not because of any wiring problems. Low beam burns out first because it is on the most. If low beam is lost simultaneously in both headlights, I would check fuse first, then the headlight switch. If low beam is lost on one side only, it is almost always going to be due to the bulb or lamp module needing to be replaced. In that case, replace them in both headlights because the other one will be going kaput in short order, as well.
Most like the low beam filiment is bad but the high beam filiment is still good, try replacing bulb. If replacing bulb does not fix problem then you probably have voltage problems and should check the voltage reading and the plug.
OR
isolate the wire that comes from the headlight switch to the headlamp bulbs for low beam and check to see if there is a short in the wire. You can find this wire by using a test light turn on the key and get a good ground with the test light poke the wire and see if the test light illunimates with the headlight switch on.
check the wires, and check the fuse for your lowbeams. could of blown a fuse on your lows, but your highs will still work.

The fuse box is located in the engine compartment,on the driver's side. Has thumb-screw retained cover.
Thanks for contacting fixya.com

Nov 07, 2009 | Dodge Ram 1500 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

524 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...