Question about 1999 Jeep Cherokee

2 Answers

Electrical problems when I start my jeep some times the airbag light stays on and shortly the gauges tach/ gas gauge and fuel gauge dont work unless I reset the mileage trip push botton and then it might work for awhile or I must keep pushing mileage reset button few more times before it stays working

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem, my instrament panel had a loose connection. If that is the problem you will have to have someone reconnect it. You can also try to reset the computer, you can do that by putting your key in and turning it back and fourth (with out starting the car)12 times

Posted on Aug 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Had a similar issue with my 99 Cherokee, after a lot of money wasted at Jeep dealer with the issue returning after a few days. Jeep replaced the gages, the wiring harness for that led to the gages twice. Took it to a friend of a co-worker shop and he made a custom wiring harness, the issue was the wiring harness was over heating and then failing.

Posted on Jul 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Satria, Tacho and Fuel gauge dont work . Fuel gauge comes up now & again low fuel light works. Tacho works now & again. But speedo and temp do work all the time.


It may be that the speedo and temp are mechanical, whereas the tach and fuel are electrical. Check fuse for inst. cluster for clean and tight fitment. Check electrical connection at back of inst. cluster.

Dec 09, 2014 | Cars & Trucks

1 Answer

97 plymouth breeze speedometer,tach gauge,temp gauge,brake lights, dont work.


circuitry behind the gauge panel. you will have to pull the dash to see behind there and track the problem down

Nov 28, 2013 | 1997 Plymouth Breeze

1 Answer

I just got a 2000 Ford Ranger XLT 4x4, 4.0, std tran. The oil gauge doesn't work (engine runs fine) Previous owner said something about the ground for the instrument cluster (?) Also the gas gauge is off...


You should invest the $25 in a repair manual from the auto parts store. It has wiring schematics in the back of the book. Get yourself a decent digital volt ohm meter and start tracing the wires for your oil gauge, or you could try changing out the oil sending unit on the motor. It may be bad and they're not that expensive. As for the gas gauge, it sounds like you have a sticking float in the tank. As far as I know they do not sell the float and the fuel pump separate from each other. I would just watch the miles per tank of gas on the trip meter, unless you absolutely have to have a gas gauge then it's time to change the whole pump assembly.

Oct 29, 2013 | Cars & Trucks

1 Answer

1998 Plymouth Grand Voyager.........Dashboard instruments quit working and don't light up. Speedo, tach, fuel gauge, temp gauge, and mileage indicators and lights for same stopped working. ABS...


You have some wiring problems shorting out that is coming from the dash board so if you or anyone you know how to use a multimeter to check the wireing harnesses plus check any connectors that might be just very touching the connector of dashboard which means a bad connection to dashboard.

Jun 04, 2011 | 1998 Plymouth Voyager

2 Answers

97 Jeep Wrangler Dash Gauges Arent Operating..everything else ok!


ck the engine to body ground.located back side of engine and srew to firewall.

Jun 01, 2009 | 1997 Jeep Wrangler

1 Answer

Fuel guage light stays on indicating out of fuel


Try turning you key on but do not crank it do you here the fuel pump kick on . if not sure try it again and tap the fuel tank with a rubber mallet or hammer. if it starts now you pump is going out ,your gauge ,flote is built to the fuel pump also.

Mar 12, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Intermittent fault on instrument cluster


there is a wiring package that contains a wiring connector for the back of the cluster.the part number is 5016261aa

Dec 04, 2008 | 1999 Jeep Cherokee

Not finding what you are looking for?
1999 Jeep Cherokee Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...