Question about 1995 Ford Aspire

1 Answer

No power going to the fuel pump!

Hi!
Since I was getting no fuel up to the filter, I checked the fuses in the dashboard all seem fine, I checked for voltage at the wire harness plug on top of the fuel tank and I only got 6.5V probably for the sending unit, but nothing else for the pump.
I also checked and did reset the inertia safety switch.
So I pulled the fuel pump assy. and of course the pump is seized.

My question is, is there a relay or a fuse somewhere else to be checked in order to get the power back to the fuel pump, and what would be the voltage!

Thanks!

p.s. sorry for the lengthy text
Claude

Posted by on

  • ray gilbert
    ray gilbert Jul 31, 2008

    yah i have the same problem no power to the pump so how do i test the pump to see if its seized up or not plzzzzzz help?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

There are four relays under the hood on the drivers side fender. I think the order is main, ignition, ????, Fan. The second one from the driver is the relay for the fuel pump(ignition). Don't quote me, but I think you should measure 12v from both sides to ground when the pump should be on.

Posted on Nov 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia sportage cranks but seldom starts??


Have you checked the fuel pump relay to see if it is sending power to the pump ? The computer grounds the relay when the computer "sees" oil pressure or engine RPM.

Jul 17, 2014 | 2001 Kia Sportage

1 Answer

No power at fuel pump


Sounds frustrating. Presumably you've also checked the fuse panel for blown fuses? Check to be sure you're at least getting power to the fuse, that will at least narrow down a problem before the fuse or after.

Jan 09, 2013 | 1998 Toyota Tacoma

1 Answer

Hi, I bought not long ago a 1997 Town & Country Lxi, everything was fine for about 2 weeks, but then one morning I could not start it, I mean everything was working fine, the dashboard, lights, even...


Was the fuel filter replaced when the fuel pump was installed? A clogged fuel filter may have been what took out pump#1, and it can quickly send pump #2 to the happy hunting ground also.

Sep 05, 2011 | 1997 Chrysler Town & Country

1 Answer

We replaced the relay switch, put in new fuel pump and filter. we tried to start it again and it just cranks but won't start. we checked the fuel pump fuse and it seems to be ok.....Don't know...


If the initial problem was that the vehicle would shut itself off at any speed, and that the dashboard would go black, then have the ignition switch checked, NOT the lock itself, but the cabling attached to it and that connects to the fuse box. This ignition harness is prone to failure, and can produce a problem similar to the one you describe. The part itself is about $100 or less, but it is difficult to install. Keep me posted.

Aug 22, 2011 | 1998 Honda Accord

1 Answer

I have a 1997 isuzu rodeo 3.2L I've checked the continuity on the fuel pump wires they seem fine. No/low voltage on the wires to the pump, (.08 volts when DMM is set to 20). Checked pump after removing the...


You may want to try to see if the car will start while you spray starting fluid down the throttle body. If it doesn't, the problem may not be the fuel pump at all. There is an idle air control valve bolted to the front of the throttle body that can keep the car from starting as well.

If the car starts with the starting fluid, you might want to change your fuel filter. It's mounted under the car near the passenger rear door.

Mar 06, 2011 | 1997 Isuzu Rodeo

2 Answers

What else to check?


Check your fuse for the transmission if it is an automatic. It may have went into a limp mode without power to the soleniods as such all you will have is 2nd gear and reverse. Also the PRNDL switch may not be getting power too, so it would give you trouble starting.

Jul 13, 2009 | 1998 Chevrolet C1500

2 Answers

92 topaz fuel pump


listen at tank if pump starts when turning key to start car,if yes pump is bad, if no noise check pump fuse ,relay,power at pump

Feb 23, 2009 | 1992 Mercury Topaz

1 Answer

No power from fuse to fuel pump


check in trunk for a fuel cut out switch, it shuts down fuel flow in case of an accident

Feb 15, 2009 | 1996 Saab 9000

1 Answer

No power from fuse to fuel pump


fuel pump works fine but gage isn't working any one got any idea?

Oct 12, 2008 | 1994 Saab 900

Not finding what you are looking for?
1995 Ford Aspire Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...