Question about 2002 Buick Century

1 Answer

How to change the flasher /tail light on a 2000 buick lesabre

Posted by on

  • Taradactyl Dec 12, 2008

    Basically the same problem, except my question involves the tail lights on a 1990 model.

  • Anonymous Dec 20, 2008

    Mine's the same. The blinker light on the panel won't come on and neither will any flasher light but the fuse is not busted.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Go to the trunk, remove the plastic nut holding the trunk interior skin in place (the nuts are the plastic that the trunk net hangs on), the skin will pull away with a snap after that. Remove three bolts from the back of the taillight, the taillight assembley will slid out from the exterior of the car. Remove the wire assembly from the taillight, replace the bulb and put it back into the taillight. SLide the taillight assembly back in place, but the three bolts back on, snap the trunk skin into place, screw the plastic trunk net bolt back in.

Posted on Dec 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 buick lesabre right side no tail lights


You have to start with the basics. Check the bulbs to see if they are blown. Before you replace the bulbs check the wiring harness in the trunk to see if there are any pinched wires.

Mar 25, 2015 | 2000 Buick LeSabre

Tip

How To Change Replace Front Turn Signal Light Buick Lesabre 2000-05 1AAuto.com


How To Change Replace Front Turn Signal Light Buick Lesabre 2000-05 1AAuto.com

on May 02, 2012 | 2005 Buick LeSabre

Tip

How To Change Replace Front Turn Signal Light Buick Lesabre 2000-05 1AAuto.com


How To Change Replace Front Turn Signal Light Buick Lesabre 2000-05 1AAuto.com

on May 01, 2012 | 2000 Buick LeSabre

1 Answer

Trunk tail out on 2000 buick lesabre


All of them or just some of them? If it is all of them, I would check fuse or wiring going to it. If it is just some of them, you can pull the entire bar by popping the trunk and undoing like 8 little nuts that hold the light bar in. Then you can just twist out the individual lights and replace them. I believe that most of them are 194 bulbs.

Apr 13, 2013 | 2000 Buick LeSabre

2 Answers

2000 buick lesabre turn signals dont work but hazard lights do


buicks usually have a separate flasher for each circuit, the flasher for the turn signals should be near the one for the hazards. it will be in the owners manual.

Apr 07, 2011 | 2000 Buick LeSabre

1 Answer

Dash blinker light on stead, blinker works normally


check your fuses, we had a buick and it had the same problem and it was a faulty fuse connection

Mar 12, 2010 | 2000 Buick LeSabre

1 Answer

How to change tag light on 2000 buick lesabre? Or maybe some pictures and discriptions on what to do!


Remove Trunk Inner Panel At Rear of trunk and then gently twist the light electrical plugs and replace bulb.....

Dec 16, 2009 | 2001 Buick LeSabre

2 Answers

Water in tail light 2000 buick lesabre


hi, if you have water inside your tail light then this means that the seal on your tail light has become damaged due to corrosion the only thing you can do is replace the whole tail light.

Not doing this will cause the electrics to corrode causing you loads of problems with the lights and would also blow loads of fuses.

Its best you change this sooner rather than later as it would save you money in the long term.

Let me know how you get on or if you need further assistance ok

Oct 12, 2009 | 2000 Buick LeSabre

1 Answer

My signal lights on my 1989 buick lesabre has


It's the same bulbs I believe, so look for the flasher module, the most likely suspect. It should be a round metal or plastic can, pretty accessible under the driver's side dash.

They use a different flasher module for the emergency lights because it's turning on and off more bulbs.

Sep 11, 2009 | 1989 Buick LeSabre

Not finding what you are looking for?
2002 Buick Century Logo

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...