Question about 1995 Chrysler LeBaron

1 Answer

95 3 liter

Hey i have a 95 lebaron 3 liter it goes into limp mode but when you kill it and restart the pc it shifts good again for a while but you have to restart it evry so often. Ive been told evrything from a shift solonoid pack to a new tranni please help!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

Have a scan done on your car and have whoever scan the trans. computer. The trans. computer is detecting a problem with one of the sensors and puts the car into "limp in" mode. I positive that you don't need a new trans. It could be a 10 min. fix just a matter of unscrewing a sensor and screwing another one in. I've seen alot of problems with speed sensors, input, and output sensors. Have a scan done though because you don't want to just "throw" parts at it. Go to a shop that has an actual scanner and not a "code reader" like the part stores.

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 Nissan Maxima transmission code p 07340 p 11005 transmission is in limp mode have erased several times


what have you done to repair the fault that shows the codes?
from your statement you are removing the codes and resetting the ECM but the codes come back and the vehicle goes back into limp mode
one of the codes (p 0734 --0?) refers to gear 4--incorrect ratio===causes --wiring---TR sensor /switch ---shift solenoids---transmission mechanical fault
If that fault area is not fixed then the TCM doesn't know what gear to select so it goes to limp mode

Jan 04, 2016 | Nissan Cars & Trucks

1 Answer

Goes into limp mode, just restart & will run for awhile again. checked fuel system & regulator.cat. convert, 4 sp. auto, changed ext. shift module.


Did this happen all of a sudden? Is this a 4 or 6 cyl. engine? Did you have anything done to the car just prior to this problem or within the last couple of months? How many miles on it? Any aftermarket instillation's?

Mar 13, 2013 | 1990 Chrysler LeBaron

1 Answer

95 stealth...what else can it be? I bought this car 3 months ago and haven't gotten to drive it yet. It is stuck in limp mode.


Can you pull any errors off the ECU? Do you have the standard dash installed? My Alfa will not change up from second if my dash is not installed.

Feb 01, 2013 | 1995 Dodge Stealth

1 Answer

Transmission will shift properly and then it wont shift it stays on first i have disconnet and connect battery cables for it to shift


Sounds like you have a transmission problem.
The reason it's stuck in 1st or 2nd is the computer goes into "limp home mode" allowing you to get the vehicle to a service center to get it repaired.
By disconnecting the battery you reset the computer and your transmission works until it senses the problem again and goes into limp home mode again
Get your trans serviced

Jan 31, 2011 | 1993 Chevrolet K1500

1 Answer

94 Lebaron GTC 2nd gear limp in mode


It has an electical problem. You need to take it to the dealership if you want it diagnosed correctly. It will need to be in limp in, and don't turn the car off as this is clearing the code out of the computer. Leave it running, tell the service advisor your situation and not to turn it off till someone can hook the scan tool to it. This will give them the cause of limp in, and should be able to be resolved after.

May 31, 2009 | 1990 Chrysler LeBaron

1 Answer

1990 chrysler lebaron goes into limp mode have to stop car restart and problems stop temporarily


The symptoms you describe, "limp mode", no check engine light, after a restart you get a temporary cure, and the year of your vehicle, tell me your catalytic converter is becoming clogged.

As your vehicle warms, the exhaust pressure builds and can't properly escape through the catalytic converter. When you turn the vehicle off, the pressure slowly releases, and when restarted it will run ok again until the pressure builds.

I would replace the catalytic converter, and that should resolve your issue.

I hope this information helps you, and I wish you luck on your repair.

Apr 28, 2009 | 1990 Chrysler LeBaron

1 Answer

91 lebarron wont shift grears when its in drive,


Does it act like it is stuck in 2nd? (Limp in mode) Have the TCM scanned it has trouble codes stored in it.

Apr 14, 2009 | 1991 Chrysler LeBaron

1 Answer

Transmission locked up, felt like it was stuck in second or third gear. not shifting. shut engine off and restarted , shifting properly now. what causes this.


It was a temporary fault that put the car into limp mode (a safeguard operating condition designed to protect the transmission in case of serious failure). Sometimes a transient fault can occur, and the car goes into limp mode just to be sure it's not for real. Shutting off and restarting the car is the usual way to clear the fault and return the car to normal operation - if the problem was real, the car would've stayed in limp mode after restart, or gone into limp once you started driving again. I wouldn't sweat this one, since it went right back to normal operation.

Aug 02, 2008 | Mercury Milan Cars & Trucks

Not finding what you are looking for?
1995 Chrysler LeBaron Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...