Question about 2000 Chevrolet Tracker

3 Answers

The tracker won't start. put a fuel pump on it but did not help. Does the fuel pump have a fuse. The battery is good. What could be wrong

Posted by on

  • 2 more comments 
  • Anonymous Nov 29, 2008

    I have the same problem with my 02 tracker. I am going to try the fuel filter first because the pump sounds like it is turning on.

  • tiffaniross
    tiffaniross Jan 14, 2009

    I have the same problem. I also replaced the full pump, and just recently had to have the transmission repaired... blah. cars!

  • tiffaniross
    tiffaniross Feb 09, 2009

    The fuel system unit on my car ended up being melted? I also had to replace the battery and alternator.

  • michaelrhans May 11, 2010

    Just for clarification, have you check for fuel with the key on at the engine?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

It has a fuel pump relay and a fuel filter but also clean the tank with a chemical salution froma any auto parts store filter $20 relay $15 filter is by gas tank toward front and realy is on driver side of console by steering colum

Posted on Jun 18, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 104 Answers

The 12 volt supply connection on the inside of the assy overheats, blackens, and looses continuity. I've seen this same failure on s10's and a Lumina

Posted on Jun 14, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

Check fuel pressure. if fuel pressures is good.
you have another problem.
there are 2 motors. 1.6 and 2.0 L
but might be same ?
i looked they are 6 drawing in the pub lib.
ok
the fuse is labled, FI
for fuel injection
and runs all Electronic Fuel injections components
ECU, injector, igntion, you name it.

that is all.

do you want to diagnose this and not guess at parts?
then check :
1: engine compression , 180psi on all 4 , if all way less then you have a serious problem.
2: check fuel pressure.
3: check injector signals with a NOID light.
4: check spark first.

if you do all 4 , you will Find the problem. I promise.

Posted on May 01, 2009

2 Suggested Answers

  • 10 Answers

SOURCE: My fuel pump won't start but all the fuses are good.

common problem with chev trucks. the square 4 wire plug on the top of the fuel pump is known to go bad. Often shorting the fuel pump. replace the pump with the new pigtail they provide in a good quality fuel pump.

Posted on Nov 24, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel


old post 1991 a 8valve engine????
it ran before? or not? if not you did the diagnosis wrong, ask?
does it crank? no, then.
if you read the fsm it said disconnect battery first.
forget to put it back?
keyon, CEL lamp glows, it must or you blew up to 3 ECU fuses.
say it cranks,
fuel pressure not 34psi but 0 or 10
you did it wrong.

http://www.fixkick.com/nostart.html

the first test for dead fuel system after proving
that is what
check output of fuel pump relay for 11 to12v cranking
if good the at pump. actual
if no power to pump all old and new pumps are useless
ask how to finish this process..

Mar 27, 2014 | 1991 Geo Tracker

3 Answers

Car won't start put in new battery but still won't start cranks real good.


Is there a check engine light on? Did car crank with old battery or you just replaced to see if would start?

Feb 20, 2013 | 2000 Nissan Maxima

1 Answer

1994 tracker ran fine but let sit for several months and now won't start. Will start with starting fluid but then cuts off.


try disconecting battery cables to re boot computer or check ur ecm fuses to make sure its sending signles

Dec 31, 2012 | 1994 Geo Tracker

1 Answer

I have a 1995 ford contour went out this morning and it won't start, checked the battery, its good, checked the fuel pump its getting fuel


you have to check the fuse to the injectoirs as well as fuse to fuel pump start there they are under the hood in road fuse box

Sep 12, 2012 | 1995 Ford Contour

1 Answer

We can't get our 1991 GEO Tracker to start


I had this problem as well. The tracker had sat for 8 years and would only run off of starter fluid. I replaced the filter and fuel pump then I had no fire. Located under driver side dash in the fuse panel theres a fuse for coil. I don't remember which one, but, I am pretty sure it is a 10 amp fuse. Or just do like I did and replace any bad fuses. If that doesn't work it will be a relay located above that same fuse box.

Aug 01, 2010 | 1991 Geo Tracker

1 Answer

92 geo tracker wont start replaced gas pump fuel injector relays i can soray starter fluid in the carb and it will start right up but wont run


CHECK FUEL PUMP FUSE.AND CHECK IGNITION TIMING ALSO SCAN IT TO MAKE PCM IS GOOD.FUEL PUMP WONT TURN ON IF PCM OR ECM FAULTY.

Mar 17, 2010 | 1992 Geo Tracker

1 Answer

1991 tracker I put in a new fuel pump relay. the new relay has power comming to teh relay the wire going to the fuel pump has no power. put the jumper wire in and the pump runs. Why won"t the power go...


probably becuase its faulty...try replacing it and go from there...or else there is another source of resistance in the circuit some where....also, check your fuses....a blown fuse will stop flow of current as well.

Nov 14, 2009 | 1991 Geo Tracker

2 Answers

My tracker wont start up


Hi. you should replace air filter and ad a gooooood fuel ingection cleaner ,this should help.Good Luck

Aug 01, 2008 | 2001 Chevrolet Tracker

Not finding what you are looking for?
2000 Chevrolet Tracker Logo

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...