Question about 1999 Mitsubishi Montero Sport

1 Answer

Cn't find pcv to replace it - 1999 Mitsubishi Montero Sport

Posted by on

  • rich7253 Jul 23, 2008

    owners manual doesn't show location

×

1 Answer

Should be front of engine drivers side.gl

Posted on Aug 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the pcv valve on a 96 Chevy g30 van?


Mike, on your Chevy PCV valve normally plugged into valve cover.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
99 Tahoe PCV Valve replacment
1999 Chevy Suburban PCV Valve replacement
https://www.summitracing.com/int/search/part-type/pcv-valves/make/chevrolet/engine-size/5-7l-350

Aug 17, 2016 | Cars & Trucks

Tip

How to replace AUDI (VW) PCV valve


PCV is an acronym for positive crankcase ventilation.
The PCV Valve is a very common replacement item on many engines today. It's called the PCV valve for short but it stands for Positive Crankcase Ventilation. When your engine spins it many times collects pressure in the crankcase area, and it has to escape to relieve pressure on the motors bearings and seals. The PCV valve and PCV system is typically located near the intake manifold, and many times comes right off of the valve cover. It is very simple to replace the PCV valve, and you can do so by simply unscrewing it, and screwing in the new valve. We recommend using a little bit of teflon tape or paste to make sure you do not get any oil leaks.
Example (see picture below): 2,4 ltr. Audi V6 engine (BDV, AMM)
c240cdd.pngIt's not difficult to replace PCV valve!

on Dec 18, 2009 | Audi A4 Cars & Trucks

1 Answer

How to replace pcv valve


  1. Pull the PCV valve from its housing and place your thumb over the PCV valve opening. You should feel it click. If the click sounds or feels mushy, replace the valve. The PCV (positive crankcase ventilation)valve is a one-way valve that recycles crankcase gases back into the engine to burn.

Jul 16, 2014 | 1995 Oldsmobile Cutlass Ciera

2 Answers

When I have to replace PCV valve


The PCV valve is only needed to be replaced when it no longer works properly. Look for the PCV valve and disconnect it from the engine and from the vacuum supply.. The valve should be clean and rattle when shook.
Symptoms of a failed PCV can be poor idle quality, oily residue in the air inlet of the intake manifold or possibly fail emissions test.

Apr 28, 2014 | 2006 Ford Five Hundred

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

5 Answers

Is the pcv valve replaceable in the 2001 Sunfire 2.2L engine or is it built in to the valve cover


Yes the PCV can be replaced. It seals into a rubber grommet in the valve cover. See pitcure of valve below.


emissionwiz_232.jpg

Sep 23, 2011 | 2001 Pontiac Sunfire

1 Answer

I have a 1989 buick lesabre 3.8 and want to change


Remove PCV valve from rocker cover. Run engine at i
dle. Place thumb over open end of PCV valve to
check for vacuum. If there is no vacuum at valve, c
heck for obstruction in manifold port, hoses or PCV
valve. Repair or replace as necessary.

Turn engine off. Remove PCV valve. Shake valve and
listen for rattle of check valve inside. If a clear
rattle is not heard, replace PCV valve.

Visually inspect valve for varnish or deposits whic
h may make PCV valve operation sticky, restricted o
r
cause incomplete seating of valve. Replace if neces
sary. An engine must be sealed for the PCV system t
o
function as designed. If leakage, sludging or dilut
ion of oil is noted AND the PCV system is functioni
ng
properly, check engine for cause and repair as requ
ired to insure PCV system will continue to function
properly. An engine operating without any crankcase
ventilation can be damaged so it is important to
replace PCV valve and air cleaner breather at regul
ar intervals (at least every 30,000 miles). Check a
ll hoses
and clamps for failure or deterioration.

Mar 28, 2010 | 1989 Buick LeSabre

2 Answers

How difficult is it to change the PCV valve. 2004


PCV is an acronym for positive crankcase ventilation.
The PCV Valve is a very common replacement item on many engines today. It's called the PCV valve for short but it stands for Positive Crankcase Ventilation. When your engine spins it many times collects pressure in the crankcase area, and it has to escape to relieve pressure on the motors bearings and seals. The PCV valve and PCV system is typically located near the intake manifold, and many times comes right off of the valve cover. It is very simple to replace the PCV valve, and you can do so by simply unscrewing it, and screwing in the new valve. We recommend using a little bit of teflon tape or paste to make sure you do not get any oil leaks.
Example (see picture below): 2,4 ltr. Audi V6 engine (BDV, AMM)
b0e80b6.png It's not difficult to replace PCV valve!

Sep 24, 2009 | 2004 Audi A4

1 Answer

Pcv valve replacement


The PCV valve is not removable from the valve rocker arm cover. The PCV valve and rocker arm cover must be replaced as an assembly.

Jun 21, 2009 | 2005 Chevrolet Equinox

1 Answer

Replace PCV valve 2001 taurus duratec engline rough idling when engine is cold. Engine will stop when vehicle is stopped at an intrersection. After driving for 30 plus minutes the car idles fine. Air leak?...


I dont think it is the PCV but its a good idea to replace the PCV at least once a year either way, and its very cheap, usually $2-$5 at autozone.

Mar 25, 2009 | 1999 Ford Taurus

Not finding what you are looking for?
1999 Mitsubishi Montero Sport Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...