Question about Chevrolet Tracker

1 Answer

Hi,Does the 2003 chevy tracker have plastic door panal clips or can you remove a couple screws and lift up and pull off the panal without breaking any fasteners.Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Clips and few screws

Posted on Jul 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to remove ford taurus window switch


Door Panels

Print


REMOVAL & INSTALLATION

See Figures 1 through 8
This procedure applies to both the front and rear door panels.


0900c152802604e4.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Remove the cover from behind the inside door handle by gently pulling it out to release the retaining tabs


0900c152802604e5.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Remove the pull cup retaining screw cover and...


0900c152802604e6.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: ... remove the retaining screw from the cup and lift the cup straight up out of the door panel


0900c152802604e7.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: Remove the two sail panel/speaker grille retaining screws and...


0900c1528026022f.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 5: ... remove the panel/grille from the door


0900c152802604e8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 6: The door panel is retained to the door by 11 retaining clips


0900c152802604e9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 7: Carefully lift the door panel off of the door and...


0900c152802604ea.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 8: ... detach the electrical connectors from the switches and remove the panel from the vehicle

  1. Remove the cover behind the inside door handle.
  2. Remove the screw from the bottom of the pull cup retaining the front door trim panel to the front door.
  3. Remove the two screws retaining the sail panel/speaker grille assembly and remove the panel/grille from the door.
  4. Remove the three screws retaining the front door trim panel to the front door.

Do not attempt to remove more than one pushpin at a time.
  1. Use a suitable tool to remove the pushpins from the door.
  2. Carefully lift the door panel away from the door.
  3. Detach the electrical connectors as necessary and remove the panel from the door.

To install:
  1. Installation is the reverse of removal.

Aug 15, 2012 | 1998 Ford Taurus

1 Answer

1999 Chevrolet Silverado power windows, How do you remove drivers side door panel


not really sure on that one but on most first you will need to remove screw around handle that opens the door that needs to be removed. also should be screws underneth handle that pulls door shut that you will have to remove and in some cases . check around edge of door panal for more screws and if found remove them also. once all screws are removed you will need to pry on door panal slightly because there are clips behind panal holding it on. in alot of cases the clips break when removing panal but dont worry the can be bought at your local auto parts store and are very easy to replace. I usually use something flat like a small stiff putty knife to help pry door panal lose. this helps insure that you dont break of crack the panal. after all clips are off simply unplug wire connections and door handle linkage and your done. .....hope this helps and good luck

Aug 13, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

How do I remove the rear door inner panel from my 2003 Pontiac Grand Prix? I need to check/replace the the window motor.....


Hi, to remove the door panel, remove any screws that are in the vicinity of pull handles and door pockets. These screws will be under little trim covers that you need to prise off to get to their heads. Look for the screws around the edge of the panel and also the screw in the latch release handle recess.
The lock knob, if there is one there, will have to be screwed off and then carefully work your way around the door, freeing the panel's clips from their holes in the door frame. (Doot panels are brittle and clip break out easily).
Finally the panel will probably have to be lifted out if the window slot. (If the panel does not come off, work out what is retaining it and remove that screw or slide it off the clip that is still holding the panel. Disconnect any electrical plugs behind the panel. Under the panel you will find a plastic dust sheet that is stuck to the door frame, remove this carefully, you will have to replace it before replacing the panel....

Hope it helps.....

Jul 11, 2011 | 2003 Pontiac Grand Prix

1 Answer

I'm not sure how to remove the exterior door trim (door bumper guard) from a 2003 dodge caravan?


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect any other wiring that may be attached to the door. Then you need to pull back the weather seal and then you can disconnect the screws and clips that secure the outside trim to the door.

Nov 03, 2009 | 2003 Dodge Caravan

1 Answer

I need to replace my 2003 chevy malibu drivers side mirror. I am pulling of the door panel, having problems removing panel, I am unsure where clips are>


the clips are all around door. about 7 or 8 inches apart. on both sides and bottom. use a flat blade or similar to pop clips loose on panal. when clips are loosened, then roll down window and slide panal upward to remove. good luck!!

Oct 18, 2009 | 2003 Chevrolet Malibu

1 Answer

Removing a door panel on a 1988 chevy C15 truck


There should be a couple of screws on the arm rest that you need to remove and probably one on the door handle then you need to find something to pry the panel off with, without breaking the plastic clips. They make a special tool for this that you can buy for just a few dollars at any auto parts store. If attempting to do it without the right tool be careful not to break the clips.

May 15, 2009 | 1988 Chevrolet C1500

1 Answer

Passenger door lock removal


hello,seems you have a sticky siding maybe because of plastic clips,try to insert a plastic wedge siding and door,pull the lower part and lift a bit,observe the movement of siding,how about the screw in lower armrest,press off the cover,then look for screw,be sure no screw are fitted,ty

May 02, 2009 | 1996 Mercedes-Benz C-Class

1 Answer

Inside door handle broke on a 2003 hyandi accent. how do i remove inside panel other than the screws


once you remove the screws from the door panel, the rest is held on by about a dozen little plastic fasteners. It is near impossible to remove the panel without breaking at least a few, but try pulling firmly on the panel working your way around the panel. you can also use a screwdriver as a prybar to pop the clips loose. if a few break, it is not a big deal to re-install it with a few missing fasteners. be sure to re-install the plastic lining behind the door panel as it is very effective in keeping noise out and heat and a/c in.

Mar 14, 2009 | 2003 Hyundai Accent

2 Answers

Removing Door Panel for MPV with door Stuck


I think the 04 should be very similar to the 03. Here is my fix for the 03

I just fixed this same problem. It happened to me 3 different times in a month so I got good at it. Before you dive into removing your door try this. Pull the door handle and release it letting it snap back several times. The problem is a half open door latch that won't let the door unlock. Do this as aggressively as you can to attempt to get the latch to return to its original position. Check the door lock between flicks.

Ok, if that didn't work, here is how to remove the door.
1. Remove the screw behind the door latch, you will have to pop the plastic cover off first.
2. Remove the rubber insert in the door handle
3. Remove the screw that is now visible
4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van.
5. Remove the clips that attach to the lock and to the window controls (these can be a pain)
5. (Optional) Remove the bracket that held the window/lock control module

At this point your door is basically free, it is only held in place with plastic clips that can be easily forced off. If your door were open you would simple pull the bottom of the door out (hinged at the window) and lift it off. But since we can't pull because the door is closed we have to force it out.

From here it is pretty simple. Move the seat all the way back and tip the seat way back. Lift the door panel straight up. You will be breaking 2 plastic clips from the rear part but once you do it just pulls out. This is not that easy because the space is limited but just keep pulling and force the rear end of the door panel past the b-pillar. Once you do this it is free.

Have fun and try to keep the black gook from getting everywhere.

Oh, to fix the door lock just oil/grease it and manually move the mechanism several times.

Nov 18, 2008 | 2004 Mazda MPV

1 Answer

Removing Door Panel for MPV with door Stuck


I just fixed this same problem. It happened to me 3 different times in a month so I got good at it. Before you dive into removing your door try this. Pull the door handle and release it letting it snap back several times. The problem is a half open door latch that won't let the door unlock. Do this as aggressively as you can to attempt to get the latch to return to its original position. Check the door lock between flicks.

Ok, if that didn't work, here is how to remove the door.
1. Remove the screw behind the door latch, you will have to pop the plastic cover off first.
2. Remove the rubber insert in the door handle
3. Remove the screw that is now visible
4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van.
5. Remove the clips that attach to the lock and to the window controls (these can be a pain)
5. (Optional) Remove the bracket that held the window/lock control module

At this point your door is basically free, it is only held in place with plastic clips that can be easily forced off. If your door were open you would simple pull the bottom of the door out (hinged at the window) and lift it off. But since we can't pull because the door is closed we have to force it out.

From here it is pretty simple. Move the seat all the way back and tip the seat way back. Lift the door panel straight up. You will be breaking 2 plastic clips from the rear part but once you do it just pulls out. This is not that easy because the space is limited but just keep pulling and force the rear end of the door panel past the b-pillar. Once you do this it is free.

Have fun and try to keep the black gook from getting everywhere.

Oh, to fix the door lock just oil/grease it and manually move the mechanism several times.

Sep 29, 2008 | 2003 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...