Question about 2002 Ford SVT Focus

1 Answer

How do you ajust handbreak cabel on ford focus 1.6 3 door year 2004

Posted by on

  • Anonymous Mar 14, 2014

    how do you ajust handbreak on corsa 04

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 208 Answers

The tightness of the handbrake is a function of the adjustmnent of the rear brakes. If the rear brakes are working properly, the handbrake adjustment will be correct. I would change the rear brake pads first, before I tried anything else. Worn pads or nonfunctioning adjusters are the likely culprit.
If you do not want to repalce the rear brakes, you can find the instructions for tightening the handbrake on a website called Focushacks.com. But, if you make the modification (I don't recommend it) you will have to change it back when you get around to changing the rear pads.

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My back doors on my 2005 Ford Focus do not lock. I tried to push the lock button manually on the door and they still won't lock. What do I do?


IF CENTRAL LOCKING REMOVE THE DOORPANELS. 2 WIRE WILL B5E CONNCTED WITH A CONECTOR BLOCK. NORMALLY BRASS. AJUST THEM TILL THE DOORS LOCK.

Jun 08, 2011 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

I have aqn 2004 ford focus wagon and the check


The generic code stands for lean fuel in bank 1

Jul 04, 2010 | 2004 Ford Focus

1 Answer

I need a diagram for a 2004 ford focus 2000cc zetec serpentine belt


Click on the following direct Free Link. It has the Serpentine Belt Diagrams, including for your 2004 Ford Focus 2.0L with the unspecified Engine Options (AC/No AC, etc.).

http://www.2carpros.com/car_repair_information/year/2004/make/ford/model/focus/2004_ford_focus_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 19, 2010 | 2004 Ford Focus

1 Answer

I HAVE A MAZDA 323 1999 MODEL CAN ANYONE TELL ME HOW TO ADJUST THE HANDBRAKE PLEASE please note it is a 1999 model but it wont let me put that year in


your handbreak connects to the rear breaks follow the cable from your break drum where the 2 meet is the ajustment give it a squart of penertrating oil before ajusting as it has been open to the weather also there is further ajustment where the cable enters the hand break lever good luck ps if this dosent do the trick i suggest you cable is fully streched you will need to fit a new one

Nov 15, 2009 | 1986 Mazda 323

1 Answer

No heat from cabin heater on my 2004 Focus


sounds as if you have an air lock on your heater try bleeding it or check your heater cable it may be jamed or needs ajustment

Nov 11, 2009 | Ford Focus Cars & Trucks

1 Answer

2004 ford focus headlight ajust ment


Your adjustment screws should be white nuts (adjustable with an allen wrench, or a socket, or a pair of pliers) located behind the headlamp assembly right up against the fender

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall. You only need to do this and the aiming for your low beams as your high beams are on the same bulb

Your headlights should also say VOR. When you turn on your headlights, aim them right at the mark that you put on the wall, with the brightest cutoff directly under the mark

Sep 18, 2009 | 2004 Ford Focus

1 Answer

I have purchased a 2004 1.8 tdci ford focus,I need a spare key!


go on ebay to by the key and then get it cut at like target or walmart...

once you get the new key...

1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice this is rewrite mode

7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.

You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works

Aug 10, 2009 | 2004 Ford Focus

2 Answers

Ford focus door handle


If it's an exterior door handle that you need to replace on your 00-07 Ford Focus, this video will show you how to fix it.

Jun 12, 2008 | 2004 Ford Focus

1 Answer

Handbrake selfreleased


The handbreak cable May have snapped if the dealership tightened it too much in the pre delivery inspection. They may not have tightened he bolt tight enough causing it to release

May 31, 2008 | 2007 Ford Focus (3 Door) Hatchback

Not finding what you are looking for?
2002 Ford SVT Focus Logo

520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...