Question about 2001 Chevrolet S-10

2 Answers

Clutch goes straight to floor - 2001 Chevrolet S-10

Posted by on

  • Anonymous Mar 23, 2014

    Pushed clutch and it just went straight to the floor



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 397 Answers

That sounds like a broken clutch cable.
Can you select any gears?
Does it grind when you try to select reverse?

Posted on Jul 23, 2008


There are a number of things it could be...

1) bleed your clutch... you could have air in it and that would cause a non-resistant clutch...
2) replace clutch kit... you could have a bad pressure plate or throwout bearing
3)replace master and slave cylinders, rebleed system...

hope this helps.

Posted on Oct 09, 2008


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: clutch goes straight to the floor

Sounds like you clutch master cylinder has gone south, to tackle this yourself will require a certain amount of knowledge on bleeding a hydraulic clutch system, if you are in any way unsure about how to do this repair you might want to find a quality repair shop

Posted on Jul 08, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Clutch goes straight to the floor

The usual problem is the slave cylinder.

Apr 20, 2014 | 1997 Ford F150 Regular Cab

3 Answers

My clutch is going straight to the floor and car wont go into gear

But check in see if it's just the ball joints first that's a easy fix compared to replacing the whole clutch I have a 1999 Ford escort manual and just had this problem I know all I need to know about this car make and model trust me it's your clutch nothing else You are soon to run into belt problems too keep an eye on that

Mar 29, 2014 | 1999 Ford Escort

1 Answer

Clutch pedal straight to floor

If you put the trans in neutral and depress the clutch pedal it should still start.
The clutch is hydraulic, so there should be something connecting the pedal to the master cyl and the slave cyl to the clutch disk.

Jun 26, 2012 | 1991 Honda Accord

1 Answer

My 2005 nissan altima 3.5 v6 5 speed will not go into any gear

possible the clutch master cylinder or the mesh sincronizer. that has always been my experiencewhen that happens

Mar 11, 2012 | Cars & Trucks

1 Answer

Clutch pedal goes strait to the floor??clutch won't bleed up??

It has air bubbles on the piping, fill the deposit with brake solution, and push and pull the clutch pedal with your hand it doesn't matter if it goes straight to the floor if that happens pull it with your hand, repeat that as if you are bleeding it up, then disconnect the piping beneath the car, the air bubbles will be forced out, then reconnect the piping and repeat the procedure, push and pull the clutch pedal like a 100 times, then disconnect the piping and reconnect. The clutch pedal should be able to go back when there is no air on the piping. If that doesn't work, replace your clutch pump

Jun 23, 2011 | Honda CR-V Cars & Trucks

1 Answer

Car will not go into gear when I push in clutch it goes straight to the floor

it sounds like you have a bad clutch master or slave cylinder or both

good luck, don't forget to rate me if i helped

Jun 09, 2011 | 2003 Mazda Protege

1 Answer

My clutch pedal goes straight to the floor. i can not shift in to any gear. if i try to start my truck in gear it moves forward.

ok,try and check the clutch pump probably need to be bleed it.or you most need the whole clutch set.

May 18, 2011 | 1991 Chevrolet C1500

1 Answer

No pressure clutch pedal goes straight to the floor 1988 holden r

If hydraulic actuated mechanism, loss of fluid, defective master cylinder or slave cylinder at the clutch. Missing pin or other part between slave cylinder and clutch arm. Loose or broken slave cylinder mounting. Missing pin or broken part between pedal and master cylinder. If mechanical linkage, look for broken components or missing pins at moving joints. If you tried to shift into gear with engine running, you may have damaged the transmission gears.

Aug 11, 2009 | 1993 Isuzu Rodeo

1 Answer

Clutch pedal goes to the floor(new clutch installed 2 wks ago)

that cable fited one side to cluch pedel and ather side fited gear box side where palte which is relecing clutch bearing. dont forget to adjust.

Dec 01, 2008 | 1985 Volkswagen Quantum

Not finding what you are looking for?
2001 Chevrolet S-10 Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides