Question about 1995 Toyota Corolla

1 Answer

My car alarm always active without any reason

Posted by on

  • dfgassert Aug 26, 2008

    My alarm went off while in disable mode and ran down my battery. It is a Protodyne pro 300.. any ideas dfgassert@yahoo.com

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 246 Answers

First take out (-) wire from the batteary and keep five minute and fix again

Posted on Jul 23, 2008

3 Suggested Answers

  • 1 Answer

SOURCE: Alarm system sounds off for no reason ('97 Lesabre Limited)

I had the same problem. The alarm system on my 1997 Le Sabre self-actuates. Luckily, it went off once when I popped the trunk. I went to Auto Zone and bought a generic trunk replacement lock. I noticed the original lock had a funky push-pull type of switch used to activate the alarm. This switch was likely hair-line on/off and when the temperature changed, it activated.

I went ahead and replaced the lock without the switch, but you can try simply unplugging the switch through the hole in the metal behind the lock to see if that might stop the alarm from arming itself (or cut the wire).

Good luck, it's a "hairy" problem.

Posted on Jun 14, 2009

  • 524 Answers

SOURCE: CAR ALARM ACTIVATES FOR NO

Try disconnecting your negative battery terminal overnight, this will reset the PCM and should solve your problem. The only other way to do this is to get a new security system relay installed in the car.

Posted on Feb 06, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I de-activate a2005 ford escape factory alarm?


Bring the car to dealer,
ask... where is the alarm?
Say...where is the fuse for that alarm?
permit the attendant at hand to take out the fuse.

Mar 10, 2015 | 2005 Ford Escape

1 Answer

Mercury Mountaineer car alarm sounds for no reason


Try using the doorkey after the door has been closed as if you did not have power locks. But most of the time, its automatic with the antitheft.

A shorting battery can activate the antitheft system. Have the battery tested.

Feb 04, 2014 | Mercury Mountaineer Cars & Trucks

1 Answer

Can a new remote be programmed if alarm is set?


Hi Kim, When you ordered the new key the dealer should have asked for the chassis number? That gives them the codes to pre program. so that it should activate and deactivate the alarm, if that is the problem! ? Regards John

Jul 02, 2012 | 2000 Pontiac Grand Prix

1 Answer

How do i set the alarm on my 1995 chrysler concorde without the push remote? someone keeps trying to break into my car!!!!!!



  • You can't access the alarm without a programmed FOB. The FOB sends a series of frequencies for each command to the brain and must be sent from an FOB to activate the alarm. As much as I understand your frustration, if the alarm could be set without an FOB then the alarm could also be de-activated without it as well. This would not be much in the way of security. Good luck to you.

  • Hope this helps.

Nov 02, 2011 | 1995 Chrysler Concorde

1 Answer

2004 Hyundai Elantra won't start, emergency flashers keep blinking, can't shut off, lights dim, can't jump start, clicking from under dash from relays. What could it be?


The 'Keyless Entry & Burglar Alarm System" is activated. You must 'Disarm' the system using the Keyless Entry Remove (Key Fob) to "Reset" the system. The reason the engine won't start is due to the burglar alarm - it has a "Starter Kill" circuit which is activated when the alarm is activated. The alarm must be DEactivated to DEactivate the 'Starter Kill' circuit.
Another way to start the engine is to get in the car, put the key in the ignition and turn it to 'ON" and wait 3 to 5 minutes until the emergency flashers stop/turn off. Afterward, you should be able to start the engine. NOTE: This does NOT reset the burglar alarm. It will go off again when you enter the vehicle without using the remote/key fob.

Sep 06, 2011 | Hyundai Elantra Cars & Trucks

1 Answer

Central locking not being activated by remote


somehow the car when on valet mode, go to a alarm shop , they should be able to re arm your car without to much damage to your pocket, or read your cars manual, it might inform you on how to fix the problem.

Sep 23, 2009 | 1998 Toyota Corolla

1 Answer

How to activate alarm 2001 bmw 325ix doors lockand unlock with key but alarm doesn't activate, lights don't flash (new car to me) if the indicator light flashes, does it mean that you have the alarm...


The flashing light does not mean you have an alarm. They were not standard in the 3-series.
You can get one installed or if you want the dealer can program the lights to flash when locking and unlocking doors even with out alarm. This is called "acknowledgement without DWA"

May 26, 2009 | 2001 BMW 325

1 Answer

Alarm system sounds off for no reason ('97 Lesabre Limited)


I had the same problem. The alarm system on my 1997 Le Sabre self-actuates. Luckily, it went off once when I popped the trunk. I went to Auto Zone and bought a generic trunk replacement lock. I noticed the original lock had a funky push-pull type of switch used to activate the alarm. This switch was likely hair-line on/off and when the temperature changed, it activated.

I went ahead and replaced the lock without the switch, but you can try simply unplugging the switch through the hole in the metal behind the lock to see if that might stop the alarm from arming itself (or cut the wire).

Good luck, it's a "hairy" problem.

Oct 29, 2008 | 1997 Buick LeSabre

1 Answer

Lost idle


get rid of the alarm. its either defective or what have you. either way the alarm is tied into ignitions and some times the function of critical electrical components

Aug 14, 2008 | 2002 Toyota Camry

1 Answer

Car alarm


Try this:
1.Get in the car
2. Closw the door
3. Disable the alarm sensor
4. Activate the alarm
5. Wait 30-35 sec
6. Get out of the car
7. Stop the alaram
8. Get in the car
9. Put the key on the position II, without starting the engine
10. Push the button READ

The alarm led must blink. Then you alarm is reset.
Sorry but my english is not very good, i'm from Romania, i hope you understand

Aug 08, 2008 | 2002 Volvo S60

Not finding what you are looking for?
1995 Toyota Corolla Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...