Question about Nissan Pulsar

1 Answer

1991 N14 Pulsar SSS, disconnected and removed instrument cluster to replace faulty speedo, after reconnecting everything, some lights work on the cluster (eg. indicators) but no instruments work at all.

Posted by on

  • Anonymous Mar 22, 2014

    How to change speedo meter cluster

  • Anonymous Mar 29, 2014

    I have no dash lights or power to fuel gage blinkers aren't working and I have everything connected and have checked all the fuses

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

HI
IT IS FUNNY ??????????
CHECK FOR FUSE BURN OR LOSS CONNECTION ??

WITH MY BEST WISHES

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you reset the abs service light on a nissan pulsar sss n14


Most all ABS systems have a self test that once all parameters are met the system will reset itself. So you need to figure out why the light is on and fix the problem. Some vehicles must be driven and reach over 15 MPH for the system to reset.

Jun 12, 2015 | Nissan Cars & Trucks

1 Answer

How to remove speedo in C5 2002


You can't remove the speedo its a fixed unit you need to replace the entire instrument cluster.
To remove the cluster
lower the steering wheel to its lowest position
get 2 flat knives or screwdrivers and insert them at the bottom of the cluster and prise it up.
remove the cluster slightly and disconnect the wiring plug.
you can now fully remove the cluster.

If your speedo has stopped working it may be the stepper motor needs replacing there are companies on the Web that will do this you send them the cluster as due to the electronics in the cluster I wouldn't recommend doing this yourself.

note citroen will replace the entire cluster and not the stepper so don't take it there as it will cost a fortune.

hint look on ebay if you need a new cluster.

Jan 17, 2014 | Citroen C5 Cars & Trucks

1 Answer

My 1995 n14 sss pulsar makes a really weird noise when putting the clutch in and changing gear


This noise is due to a part called the clutch release bearing being worn out. You must remove the transmission to replace it.

Jul 03, 2012 | Cars & Trucks

1 Answer

Hi have a 92 nissan pulsar n14 gli and the odomiter works and then stops everything else in the das works spedo temp fuel, any ideas it's not the cogs, and where is the relay for these ? checked all...


a comon problem with nissans is speedo &rev counter pointer needles warp and get stuck on the instrument face.if this is happening with yours u need 2 remove the clear plastic face heat the needle with a hair dryer and very gently bend the needle tip out from the speedo face hold it out till needle cools ps.dont over do the heat it wont need much

Sep 11, 2011 | 1990 Nissan Pulsar

1 Answer

Odometer not working


Could be that speedo cable has become disconnected or that the inner shaft has broken. The speed cable is connected between the back of the instrument cluster and the left side of the transmission. Check under the car that the cable is securely fitted to the side of the transmission. Disconnect it and and check on the condition of the square drive flexible shaft. The spinning of this inner shaft is what conveys the output shaft speed of the transmission to the instruments. The instrument cluster can be removed but pushing a length of coat hanger wire with right angle turn on its end between the the cluster and the dashboard surround. Turn the coat hanger to hook behind the cluster and pull forward to remove it. Try several points around the cluster. It is best to disconnect the speedo drive cable to withdraw the cluster (after electrical connections have been disconnected. check that the speedo cable is secure to the back of the instruments. If you remove the cluster completely follow the path of the speedo cable. If you have to replace the cable, tying a length of string to the speedo cable end first and posting the string down the cable path will help the re-installation enormously. Simply pull the string whilst reinstalling the instrument cluster until the end of the speedo can be got hold of. Refit the speedo cable to the transmission only after the instrument cluster is back in place.

Oct 17, 2010 | 1990 Mercedes-Benz 190

2 Answers

1991 cutlass supreme, 3.1 motor. all guages work except speedo.no reading.


check your speed sensor. may be faulty, is locate it on transmission.

Sep 15, 2010 | 1991 Oldsmobile Cutlass Supreme

1 Answer

My 89 pulsar speedo amd tacho imtermittently work.


remove the cluster and check the connections in the back for speedo, try unpluging and reconnecting if not replace the cluster.

Jan 11, 2010 | 1989 Nissan Pulsar

2 Answers

Dash gauge's on 91 accord are not working rpm speedometer no others at all working what can i check


Hi, you can start by checking all the fuses in the fuse boxes as some of the systems in the vehicles are integrated and getting power supplies through different circuits. If all the fuses are fine you will have to make sure that there is a power supply to the correct connecting points on the cluster. If that is fine the cluster is faulty and should probably be replaced.

Nov 24, 2009 | 1991 Honda Accord

1 Answer

Instrument lights won't turn off


hi,seem lighting switch is grounded or wiring for cluster is grounded,if can remove the lighting switch disconnected the wire,see if light in cluster is off,switch or wiring must check,ty

Mar 29, 2009 | 1991 Jaguar XJ6

1 Answer

1991 pulsar speedo


speedo went to zero km, indicators in dash work opposite, taco isn't working either.

Jul 03, 2008 | 1990 Nissan Pulsar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...