Question about 1988 Toyota 4Runner

2 Answers

1988 toyota 4runner

I need to know how to fix the passenger seat so that it can slide.
Right now I can't make is slide back and forth.
Schematic would be nice so I know how to connect eveything.

Posted by on

2 Answers

Yep i agree with conepopka you may also have a wire about 3mm in diameter which conects both slide actuaters which may have become dislodged as it is of a simple hook construction investigate it yourself it is quite a simple mechanism and can be diagnosed easily by removing the few screws in the cover on the outer side of the seat

Posted on Sep 26, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds like a cable problem. There is a Y cable that runs from the inner side of the passenger seat behind the plastic trim. This is a single cable. Goes under the seat and splits to go to each side. When the seat is folded forward it pulls this cable and releases both sliders. Toyota Part Number 72210-89105. It is about 30 dollars. check out these pictures: http://www.yotatech.com/showthread.php?t=101496. If you have anyother questions let me know.
Conenopka.

Posted on Aug 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fix rusted broken small spring under passenger seat it slides back and forth


go to your local hardware store, parts store and buy an expansion spring. cut it to length and bend a new tab on the cut end . fit it to the lever and it will work a treat. Most auto seats have the spring but you will have to upend a seat to get it out as it costs too much for the junk yards to do it.

Dec 01, 2014 | 1992 Jeep Cherokee Sport

1 Answer

Power seat won't slide back, black plug is hanging out


That is the seat heater plug most likely and you car is not equipped with that accessory. All cars come with the same wiring. Does the power seat switch have 12 volts present?

Mar 14, 2014 | 2002 Audi A6

1 Answer

How do i fix the heater on the passenger side of my 2007 chevy impala


There is a controller down by passenger floor right about where left foot would be if sitting in seat the control module usually dies and needs replace two screws and one plug. It controls a door that moves back and forth allowing heat or cool air. Well know part

Feb 03, 2014 | Cars & Trucks

1 Answer

Pontiac aztek seat


what tool do I need to fix my seat adjustment handle for the driver in the passenger seat to lean back and forth

Jan 02, 2014 | 2004 Pontiac Aztek

1 Answer

Remove honda accord rear and passenger seats


Since you did not list the year of your honda then I will just say off the top of my head to use air tools then unbolt the nuts and bolts hold the plate that your seat is able to slide back and forth on. next back seat is easy to unbolt and if you just look then you will see places you need to unbolt to remove.

Nov 12, 2013 | Cars & Trucks

1 Answer

Have a 1999 Chevy 1500 extended cab. Driver seat is not powered. Won't lock into place, keeps sliding back and forth. Was told I have to replace the whole seat and sliding track by Chevy Dealership. Anyone...


Remove the seat assembly turn it upside down cables come off the handle you pull on to slide seat, Follow these cables to 2 pawls that pivot on tracks and see if they are broken,bent,or just stuck and need cleaned and lubed.If you need new track slider assembly I use to be able to get them all the time from GM parts department and just replace tracks themselves.

Dec 23, 2009 | 1999 Chevrolet C1500

2 Answers

My passenger seat won't lock into position. It slides back and forth as I drive and the bar that you pull on to move it back and forth is stuck in the up position.


There is a spring that pull's the handle back to lock position that might be broke or the locking mechanism might be gummed up.the spring can't be bought seperatly so check a hardware store or replace the seat track assembly.

Aug 11, 2009 | 2000 Chevrolet S-10

1 Answer

The passanger seat wont go all of the way back any more.


Four bolts to take seat out . release spring on track might have come off or seat track is rusty or bent.
four bolts to take seat track off seat. junkyard parts will have what ya need.

Dec 31, 2008 | 2003 Volkswagen Eurovan

4 Answers

Power seat switch


It is most definitely the seat slide motor. Most infiniti drivers seats have three different motors. I30, I35's and QX4's all had problems with the seat slide motors. You can tap on the slide motor which is under the front of the seat and it will probably work for a little while, but it WILL stop working completely. There was actually a Technical Service Bulletin regarding this issue because there were so many vehicles that had this problem. I hate to see that guy waste money trying to get a circuit board rebuilt that absolutely will not solve the problem. 

Dec 29, 2008 | 2004 Infiniti QX4

Not finding what you are looking for?
Cars & Trucks Logo

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...