Question about 2007 Chevrolet TrailBlazer SS

1 Answer

Need help on how to remove the stock stereo and also on how to change the transmission oil

Posted by on

  • Anonymous Dec 02, 2008

    I need to remove the stock stereo from a rexton 2005

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To remove the radio you need a philips head screw driver and a 7mm socket or drill attachment. first remove the philips screw to the left of the cigarette lighter outlets in the shallow pocket, then remove the (2) philips screws above the speedo cluster. now on the flat panel below the steering column pop out the two caps on the top left and right and remove the 7mm screws from each spot. pulling the top of the panel below steering colum back you will have access to (3) philips screws, two on the left of the steering wheel and one on right side of the steering wheel. turn the truck on and lower the steering wheel all the way down and just carefully pull the radio bezel away unplugging all harnesses and adapters. you will now have accessto the radio which just is held in with (3) 7mm screws, two on the left and one on the right...i hope this helps you out.

Posted on Feb 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2012 Rav4. I had my oil changed and I was told that my transmission fluid is black and smells burnt.I called Toyota I was told that my car's transmission never needed flushed.Is this true ?


It is a myth that trans mission oil never needs changing
All oils oxidise under extreme heat conditions ( and transmission oil reaches very hot temperatures) and bearings, bands and clutches do wear
again flushing is a general term incorrectly used
A transmission oil change generally removes the oil from the pan area but leaves 1/2 the torque converter with contaminated oil
That in turns re-contaminates the fresh oil
Flushing on the other hand is expensive as it require a considerable amount of new oil to do the job It is done with the engine running and fresh oil is drawn in as the old oil is pumped out
so you have to decide to have it changed or flushed as the difference can be in excess of $200.00 dollars BUT the results are also very different
Many manufacturers run sealed transmissions , for the sole purpose of preventing DIY people from putting in the wrong oil and so causing a problem in the transmission
remember that you most probably have a CV transmission
Constant velocity) which utilizers a drive belt between 2 pulleys and requires a special transmission oil as well
The transmission performs similar to the old automatic transmissions but is vastly different in internal construction
Normal period for a change ( depending on speed and operating conditions ) is 60,000miles so talk with an accredited specialist transmission shop to get an idea as to what is a good idea on oil changes

Sep 08, 2017 | Toyota Cars & Trucks

3 Answers

How to change my 2006 Lincoln zephyr transmission filter


2006 Lincoln zephyr transmission filter Paul, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Transmission Tips 3 Recommended Fluid Change Intervals Examples
How To Service Change Transmission Fluid and Filter Ford Focus
Ford Fusion Transmission Fluid and Filter


Jul 02, 2016 | Lincoln Cars & Trucks

1 Answer

I have a 1981 ford f150 4x4 with a 302 engine An automatic transmission that works fine shifts properly going forward But when I put it in reverse I hear a clunk and sometimes it goes into gear and...


If the transmission was rebuilt 2 years ago the fluid and filter did not need to be changed. In a 1981 there are no trouble codes to retrieve so whoever suggested that is out to lunch, Unfortunatley you need to get the transmission rebuilt again, hopefully it gets done better this time. Using the dexron oil in Ford transmissions is something transmission shops do because they don't want to stock different fluids. While it's not likely that using dexron oil lead to the failure it would be better to use mercon or type F oil.

Mar 01, 2015 | 1981 Ford F 150

1 Answer

Is it possible to chang a stock player a kenwood or sony player


Yes, you just need to take the car to the dealer or a shop to take the stock stereo out then purchase a cd stereo harness for your vehicle..

Dec 28, 2012 | 2004 Nissan Murano

1 Answer

Had to change the battery on my car, so i need a code to the stereo... Its a Ford Mondeo, 96 or 97 model....stereo is 5000 RDS EON. And the serial is: M213908...can anybody please help me...? I need...


usually (if the stereo is stock) the numbers will be somewhere on a sticker in the car. i know in hondas they usually put the sticker in the glovebox on the inside or outside wall. the owners manual can tell you more for locations if it is stock. and it can also tell you the number if it isnt a stock radio.

Sep 22, 2012 | Cars & Trucks

1 Answer

What maintenace Does a 2003 Toy Rav4 manual transmission need?


The manual transmission oil, or gear box oil can't last forever. It is a good idea to replace every 60K miles with a new one. Just as with motor oil, and oil change is cheap insurance. Buy synthetic oil if you can.
The manual transmission oil change is a simple procedure, but can complicated and creates costly problems.
First remove the filling bolt. In some cases this is siezed, If the heating doesn't help, you don't want a stripped filler bolt, with an empty transmission. Use WD-40 and do not use extensive force.
If the bolt still won't budge. Stop. Lower the car and visit a shop for service.
After removing the filler bolt (upper), then remove the drain bolt at the bottom.
Replace the drain bolt, with a new one, normally has a magnet, and thread it by hand after with a wrench.
Fill the gearbox with oil using a gear oil / lube pump. Replace the filling bolt and process same as with draining bolt.
If you will change the gear box oil every 60K miles this is the best insurance for your manual transmission. DO NOT FORGET TO REPLACE FILLING AND DRAINING BOLTS WITH NEW ONE.
In rare cases a rusty bolt is siezed, almost rust welded in the transmission housing, so the transmission must be removed and taken to a machine shop.

Nov 02, 2010 | 2003 Toyota RAV4

2 Answers

How do you service automatic transmission? change trans. fluid?


remove the transmission oil pan bolts,leave one corner tight untill your ready to lower pan and drain fluid into oil catcher pan,then remove remaining bolts and drop pan,
remove the transmission filter, install new filter,clean inside pan and dry,install new gasket on pan,reinstall pan,put at least 5 quarts in before you start car and shift through gears,return to park,and bring oil to full mark.

Jan 01, 2010 | 2005 Ford Mustang

2 Answers

How to replace transmission oil


to replace the oil on your transmission is not that hard but as a auto technician I should advice you that if on any vehicle the transmission oil has never been changed and is a high millage vehicle by changing the oil the transmission can slip or go neutral you should take your vehicle to a transmission shop and have the oil changed there with special oil changing machine that would clean the transmission and converter while it replaces the old oil and if there's a risk on damaging the transmission then they will tell you before changing the oil on your transmission and if they change the oil and any problems should happen then they are responsible for your transmission but if you insist to change it your self by removing the oil pan on the transmission you let all the oil out some of these Japanese vehicles have a drain plug you can take the brain plug out then remove the oil pan once you remove the oil pan then you'll see the transmission filter with socket wrench using a 10 mm socket remove the filter and the same way replace it with the new filter don't over tork the screws tighten to 15 lb. then remove the old oil pan gasket and make sure by doing all this process everything is extra clean, clean out oil pan and replace gasket and install oil pan then after you finish pour in 3 qt. of good quality transmission oil then turn on engine and take the shifter to R then D and last N and with engine on check the level and add as needed good luck

Jul 17, 2009 | 1997 Isuzu Rodeo

Not finding what you are looking for?
2007 Chevrolet TrailBlazer SS Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...